Buy more than* S$200* and get FREE SHIPPING

Inside Gasket for Flange

Sort by:
Showing 1 - 30 of 31 Results
Show: 30 60 90
VIEW: Grid View List View
Sheet Gasket for Flange, Non Asbestos
NIPPON VALQUA INDUSTRIES
5.00(2)
0.87 - 6.23 SGD
Purpose: Petroleum refining, chemistry, ships and vessels, a variety of industries' plumbing flange., Tensile Strength (Mpa[kgf/cm2]): Horizontal direction 17.0 [170], Density (g/cm3): 1.81, Color: Blue, Thickness (mm): 1.5
Category Inside Gasket for Flange
Medium Gasket for Flanges, Teflon
NIPPON VALQUA INDUSTRIES
3.27 - 31.77 SGD
Density (kg/m3): 2180, Tensile Strength (MPa): 27.3, Elongation (%): 445
Category Inside Gasket for Flange
Medium Gasket for Flanges, For Steam
NIPPON VALQUA INDUSTRIES
4.50(2)
1.94 - 14.08 SGD
Density (kg/m3): 1759, Tensile Strength (MPa): (Horizontal direction) 12.5
Category Inside Gasket for Flange
Medium Gasket for Flanges, Non Asbestos
NICHIAS
0.95 - 9.97 SGD
Purpose: Gasket piping of flanges, valves, equipment, etc, Tensile Strength (N/mm2): 24.1, Density (g/cm3): 1.84
Category Inside Gasket for Flange
Medium Gasket for Flanges, Teflon
NIPPON VALQUA INDUSTRIES
5.00(1)
1.68 - 19.09 SGD
Density (kg/m3): 2170, Tensile Strength (MPa): 30.2, Elongation (%): 460
Category Inside Gasket for Flange
Medium Gasket for Flanges, Non Asbestos
NICHIAS
0.63 - 7.42 SGD
Purpose: Gasket piping of flanges, valves, equipment, etc, Tensile Strength (N/mm2): 24.1, Density (g/cm3): 1.84
Category Inside Gasket for Flange
Medium Gasket for Flanges, For Steam
NIPPON VALQUA INDUSTRIES
0.87 - 8.71 SGD
Purpose: Oil refining, chemicals, steam lines, pipe flanges, valve bonnets, various equipment joints, Density (kg/m3): 1761, Tensile Strength (MPa): (Horizontal direction) 13.1
Category Inside Gasket for Flange
Sheet Gasket for Flange, Non Asbestos
NIPPON VALQUA INDUSTRIES
5.00(1)
1.43 - 9.53 SGD
Purpose: Petroleum refining, chemistry, ships and vessels, a variety of industries' plumbing flange., Density (g/cm3): 1.81, Color: Blue, Thickness (mm): 3
Category Inside Gasket for Flange
Mid Packing for Flanges
Osaka Spirit
3.00(1)
0.66 - 12.69 SGD
Purpose: For general use, Ozone Deterioration Test (Expansion 50 pphm 40 Deg C 200h 20%): No crack, Cold Shock Brittle Temperature (degree c): -55, Tensile Strength (Mpa[kgf/cm2]): 7.0[71], Hardness (Durometer A): A65S, Elongation (%): 350, JIS Standard: K6380(BAD6353), Color: Black
Category Inside Gasket for Flange
Mid Packing for Flanges, Non Asbestos
Osaka Spirit
5.00(1)
0.54 - 6.96 SGD
Purpose: Use as gasket for the pipe flange and equipment of various industries., Recovery (%): 40Min, Density (g/cm3): 1.5-1.7, Maximum Temperature (Degree C): 150
Category Inside Gasket for Flange
Flange Middle Gasket, Natural Rubber
No Brand
5.00(1)
0.91 - 6.57 SGD
Compression Set (%): 22 (70 deg C, 22 hours), Hardness (Durometer A): 63, Tensile Strength (MPa): 3, Elongation (%): 250, Main Ingredient: Natural rubber, SBR, JIS Standard: K6380(AAD6040), Standard: 10K, Operating Temperature Range (deg C): -50 to 70, Thickness (mm): 3
Category Inside Gasket for Flange
Internal Gasket for Flanges, Non-Asbestos
Akitsu
2.27 - 15.16 SGD
Density (g/cm3): 1.75, Working Pressure: 10K
Category Inside Gasket for Flange
Gaskets for Flange
Daiko
5.00(2)
2.67 - 12.70 SGD
Category Inside Gasket for Flange
Mid Packing for Flanges, Non Asbestos
NIPPON VALQUA INDUSTRIES
0.74 - 7.92 SGD
Purpose: Petroleum refining, chemistry, ships and vessels, a variety of industries' plumbing flange., Tensile Strength (Mpa[kgf/cm2]): Horizontal direction 17.0 [170], Density (g/cm3): 1.81, Color: Blue, Thickness (mm): 1.5
Category Inside Gasket for Flange
Sheet Gasket for Flange, Non Asbestos
NIPPON VALQUA INDUSTRIES
1.17 - 9.71 SGD
Purpose: Petroleum refining, chemistry, ships and vessels, a variety of industries' plumbing flange., Density (g/cm3): 1.81, Color: Blue, Thickness (mm): 3
Category Inside Gasket for Flange
Mid Packing for Flanges, Non Asbestos
Osaka Spirit
0.45 - 13.40 SGD
Purpose: Use as gasket for the pipe flange and equipment of various industries., Recovery (%): 40Min, Density (g/cm3): 1.5-1.7, Maximum Temperature (Degree C): 150
Category Inside Gasket for Flange
Medium Type Packing for Natural Rubber Flange
Osaka Spirit
0.45 - 5.34 SGD
Purpose: Industrial packing, gasket material, cushion, etc., Tensile Strength (Mpa[kgf/cm2]): 3, Hardness (Durometer A): 63, Elongation (%): 250, Main Ingredient: NATURAL RUBBER, SBR, JIS Standard: K6380(AAD6040)
Category Inside Gasket for Flange
Mid Packing for Flanges, Non Asbestos
Osaka Spirit
0.66 - 12.29 SGD
Recovery (%): 40Min, Compression Ratio (%): 7-17, Flexibility: (No Break)F<=12, Density (g/cm3): 1.5-1.7, Tensile Strength (MPa): 11<=F, Maximum Temperature (Degree C): 150, pH Value: 4-11, Thickness (mm): 3
Category Inside Gasket for Flange
Mid Packing for Flanges, Non Asbestos
Osaka Spirit
4.50(2)
0.88 - 13.04 SGD
Purpose: Use as gasket for the pipe flange and equipment of various industries., Recovery (%): 40Min, Density (g/cm3): 1.5-1.7, Maximum Temperature (Degree C): 150
Category Inside Gasket for Flange
Medium Type Packing for Natural Rubber Flange
Osaka Spirit
5.00(1)
0.51 - 30.14 SGD
Purpose: Industrial packing, gasket material, cushion, etc., Tensile Strength (Mpa[kgf/cm2]): 3, Hardness (Durometer A): 63, Elongation (%): 250, Main Ingredient: Natural rubber, SBR, JIS Standard: K6380(AAD6040)
Category Inside Gasket for Flange
Mid Packing for Flanges
Osaka Spirit
4.33(3)
0.79 - 12.79 SGD
Purpose: For general use, Ozone Deterioration Test (Expansion 50 pphm 40 Deg C 200h 20%): No crack, Cold Shock Brittle Temperature (degree c): -55, Tensile Strength (Mpa[kgf/cm2]): 7.0[71], Hardness (Durometer A): A65S, Elongation (%): 350, JIS Standard: K6380(BAD6353), Color: Black
Category Inside Gasket for Flange
Flange Middle Gasket, Natural Rubber
No Brand
3.80(5)
0.68 - 14.63 SGD
Hardness (Durometer A): 63, Tensile Strength (MPa): 3, Elongation (%): 250, Main Ingredient: Natural rubber, SBR, JIS Standard: K6380(AAD6040), Standard: 5K, Thickness (mm): 3
Category Inside Gasket for Flange
Flange Middle Gasket, EPDM
No Brand
1.58 - 16.57 SGD
Ozone Deterioration Test (Expansion 50 pphm 40 Deg C 200h 20%): No crack, Cold Shock Brittle Temperature (degree c): -55, Tensile Strength (Mpa[kgf/cm2]): 7.0[71], Hardness (Durometer A): A65S, Elongation (%): 350, JIS Standard: K6380(BAD6353), Standard: 10K, Operating Temperature Range (deg C): -40 to 100, Color: Black, Thickness (mm): 3
Category Inside Gasket for Flange
Flange Middle Gasket, EPDM
No Brand
1.07 - 13.78 SGD
Ozone Deterioration Test (Expansion 50 pphm 40 Deg C 200h 20%): No crack, Cold Shock Brittle Temperature (degree c): -55, Tensile Strength (Mpa[kgf/cm2]): 7.0[71], Hardness (Durometer A): A65S, Elongation (%): 350, JIS Standard: K6380(BAD6353), Standard: 5K, Operating Temperature Range (deg C): -40 to 100, Color: Black, Thickness (mm): 3
Category Inside Gasket for Flange
Medium packing for flange (non asbestos joint sheet)
Akitsu
2.25 - 15.78 SGD
Working Pressure: 5k, Thickness (mm): 3
Category Inside Gasket for Flange
Jacket Gasket S
NIPPON VALQUA INDUSTRIES
3.52 - 22.92 SGD
Maximum Working Pressure (MPa): 2, Operating Temperature Range (deg C): -100 To 200
Category Inside Gasket for Flange
Jacket Gasket N
NIPPON VALQUA INDUSTRIES
2.70 - 13.82 SGD
Category Inside Gasket for Flange
For flange packing JIS 5K
Akitsu
2.70 - 9.55 SGD
Category Inside Gasket for Flange
Medium packing for flange (high function type)
NIPPON VALQUA INDUSTRIES
6.01 - 26.05 SGD
Purpose: Water, seawater, hot water, steam, air, acid (excluding oxidizing acids such as concentrated sulfuric acid and concentrated nitric acid at high temperature), alkali, saline solution, oils, alcohol, aliphatic solvent and its vapor, various gases It is suit, Temperature Range (deg C): -200-300
Category Inside Gasket for Flange
Medium packing for flanges (corrosion protection type)
NIPPON VALQUA INDUSTRIES
5.52 - 7.31 SGD
Purpose: It is used as a gasket for stainless steel pipe flanges, equipment joints and covers. Corrosion suppression of stainless steel can be expected., Working Pressure: 10K, Temperature Range (deg C): -50-183
Category Inside Gasket for Flange

1 2 Next