AS ONE Part Number: 1-8939-06, Heater's storage capacity (W): 500, Material (top board): Stainless steel (ceramic coating processing), Plate Size (mm): 190x190, Main Part Dimension (mm): 210x280x125, Temperature Range (deg C): 380 - room temperature +5, Power (V): AC100V 50/60Hz, Material (Body): Resin
Precautions for Use: Please note that in detergents or chemicals of chlorine, the possibility of rust on the product is high., Power Plug: Attached to, Dimension D (phi mm): 8, Cord Length (m): 2, Material: (SUS316L, finish electrolytic polishing) stainless
Temperature Setting Method: Analog settings (instructions in glass thermometer), Additional Feature: -, Temperature Control Pricision: +/-2deg C (at 60deg C), External Dimensions (Width (W)x Depth (D)x Height (H)) (mm): 240x300x150, Heater: 500 W (COPPER HEATER), Safety Equipment: Overload protection (fuse), water tank, protective cover, thermal fuse, Sensor: Liquid expansion formula, Power (V): AC100, Current (A): 6, Capacity (L): About 3.7 (water tank), Operating Temperature Range (deg C): +5 to 90 (room temperature), Weight (ｋg): About 3.5, Dimension (mm): Water tank/200 (inner diameter) x 120 (depth), Accessories: Stick thermometer (10 - 110deg C) with line immersion
Temperature Distribution Pricision: +/-(no wind, no load, internal sensor is used), reference value of 200deg C when setting 4deg C indoor environment 25deg C, Program Function: Temperature 0.1deg C, 1 minute time setting time range: number of steps: Step 8 maximum number of repetitions: 9999 times Setting resolution may take up to 1 minute - 99 hours 59 minutes (1-minute increments), AS ONE Part Number: 1-4601-03, Temperature Display Pricision: FS +/-2%, Heater's storage capacity (W): 670, Communication Function: PC output: RS232C/D-sub9pin 2m) external temperature sensor corresponding upper and lower limit temperature alarm, alarm signal output, setting memory function, key lock function, auto-tuning function, Material (top board): Aluminum (ceramic coating processing), Tempera...
Temperature Display Pricision: +/-(1%FS+2.5 degrees C), Operating Environment: 5 to 40 degrees C (humidity: less than 85%) (in case of non condensing), Sensor: K-type thermocouple, Input Voltage (V): AC100 15A, Control Method: ON/OFF operation, Temperature Range (deg C): 0 to 750, Outside Dimension (mm): 66x210x66, Set Contents: Main body + Probes + K thermocouple, TGK Product Number: 052-60-01-71, Specification: Input voltage: AC100V +/- 10% AC200V +/- 10% Temperature setting range: 0 (room temperature) to 750 deg C Temperature display accuracy: +/- (1% FS +2.5 deg C) Control Method: ON / OFF control Use Environment: 0 to 40 deg C (85% or less humidity) , but no condensation.