Purpose: Unattended fueling to conveyor. Drilling machine, tapping machine, lathe, special machines, milling machines, gear cutting machine, end mill, reamer, pull dice, engraving machine, grinding machine, punching, bending, the cooling and lubrication, etc., 2014 TRUSCO Published Page: 1-0714, Foot Operated Air Valve Dimensions (Width W x Depth D x Height H)(mm): 90x172x92, Magnet Dimension (Width x Depth x Height) (mm): 50x66x55, Number of Axes: 1-axis, Air Valve: Step on type, Prop Height(mm): 480, Mass (kg/set): 4.5, Length (cm): Injection tube: 40, Type: Injection pipe: bellows tube made, Attachment: Magnetic Base, Set Contents: Phi4x6 transparent air hose phi4x6 black magnetic base step on type air valve atomizer tube fitting R1/8xphi6 strut hanger 0.5 liters container fluid level c...
Caution: If you squeeze too much the liquid flow, the injection patterns can be distorted, Purpose: As an air gun (air cooling, blowing away, drainer etc.) Water supply . oil supply nozzle (oil supply. pouring water, washing etc), Injection Pattern: Round-spray patterns, Nozzle Inside Diameter (phi mm): 3, Nozzle Outside Diameter (phi mm): 11, Air Pressure (MPa): 0.4(4kgf/cm2), Spray Pattern: Round spray, Type: For both air and liquid
Caution: Before use, please remove the magnet part's silver plate.
It impossible to exchange the hose nipple connector as the screw specification., Before use, please remove the magnet part's silver plate.
It impossible to exchange the hose nipple connector as the screw specification., Maximum Pressure (MPa): about 0.21: Liquid about 0.35: Air, Hose Length (mm): about 330 mm, Compatible Fluid: Oil, lubricating oil, acetone, gasoline, detergent, etc., Inlet Diameter (mm): about 10, Flow Rate (L/min): about 16, Material (Hose): Polyacetal plastic, Nozzle Diameter: 1/16,1/8,quarter, Minimum Bending Radius (mm): about 33.5, Inner Diameter (phi mm): 6.35, Type: 1/4