Purpose: Hard newly developed building material/siding board/plastic /FRP/ lumber, Compatible Tool: Electric drills, Compatible Materials: Siding, wood, rigid construction materials, Hole Drilling Depth (mm): single-sided: 25-/both-sides: 50, Drill Diameter (phi mm): 8, Revolution (min-1[r.p.m]): less than 600 , Shaft Diameter: 3 grooves 10, Hole Diameter (phi mm): 30 - 200, Material: main unit :The common steel substitution blade: The super it is hard tip/chip attaching center drill: The super it is hard chip attaching, TRUSCO Part Number: 404-2824
Caution: When drilling over 30mm thick, after the center drill tip pierces the material, please drill a hole from the back side. Upto 50mm, Hole Drilling Depth (mm): - 30, Compatible: Electric drill more than 10 mm , drill press
Purpose: For wood and drywall (for counterboring - piercing), Drilling Range (mm): 15 - 45, Materials (Blade): Edged steel tool, Compatible Materials: Such as wood / drywall, Hole Drilling Depth (mm): Up to 90, Model: No.1, Compatible: electric drill Over 6.5 mm , drill press
Bowl: (33mm when the depth of cut maximum) need more than 17mm thickness 3 to 20mm width ceiling material (including decorative material) 0 to 16mm depth. Mountain burnished blade can not be used wood (veneer, control panel) to., Drilling Size (mm): 70 to 200, Cut Body Depth (mm): 0 to 33, Lifespan: (6mm depth mountain new year, when the width 10mm) hole 200 mountain burnished blade / About (2 times when using the up and down phi150, gypsum board thickness 12mm, of the blade) hole 400 main blade / About, Main Unit Dimensions (Diameter phi xHeight H)(mm): 292x237, Drilling Capability: 2 seconds About: / speed drilling / drilling speed: About 2 seconds drilling Number:: (phi200mm hole diameter) About 120 holes plasterboard 12mm: 12mm plaster board (full charge) (phi150mm hole diameter) case ...