Buy more than* S$200* and get FREE SHIPPING

Wooden House Joining Hardware

Sort by:
Showing 1 - 30 of 381 Results
Show: 30 60 90
VIEW: Grid View List View
Hardware Screw
Tanaka
4.67(3)
3.03 - 27.77 SGD
Category Wooden House Joining Hardware > Original Hardwares > Hardware Screw
Corner Bracket Plywood Type
Kaneshin
1.01 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Short-term tensile strength reference junction (P0t) 3.7kN, N Value: 0.69, Laws and Regulations: Daira 12 public notice notification No. 1460, no.2 (RO), Surface Processing: Dip zinc-6% aluminium-3% magnesium alloy coated steel sheets, Standard: (GOODS) 2435 NO. 09 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 0881 NO., Material: ZAM * (MSM-HC-DZC90 or MSM-CC-DZC90), Accessories: PILLAR SIDE ONLY SCREW (CPQ-45) (GREY) X 2 TUBES AND FOUNDATION (BEAM) SIDE ONLY SCREW (CPQ-75) (BLUE) X 2
Category Wooden House Joining Hardware > Original Hardwares > Joint Hardware
Plate Bracket
Kaneshin
2.00 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Short-term tensile strength reference junction (P0t) 8.4kN, N Value: 1.5, Laws and Regulations: Daira 12 public notice No. 1460 advice no. 2 (to), Plate Thickness (mm): 0.6, Standard: (GOODS) 2435 NO. 06 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 2252 NO., Material: NSS431DP-2 (high intensity diplophase stainless steel), Accessories: (No. 45) Rectangular-head screw CPQ-8(Gray) x 6 pcs.
Category Wooden House Joining Hardware > Original Hardwares > Joint Hardware
Corner Bracket
Kaneshin
4.38(8)
0.78 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Short-term tensile strength reference junction (P0t) 4.2kN, N Value: 0.79, Laws and Regulations: Daira 12 public notice notification No. 1460, no.2 (RO), Surface Processing: Dip zinc-6% aluminium-3% magnesium alloy coated steel sheets, Standard: (GOODS) 2435 NO. 09 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 0880 NO., Material: ZAM * (MSM-HC-DZC90 or MSM-CC-DZC90), Accessories: (No. 45) Rectangular-head screw CPQ-4(Gray) x 6 pcs.
Category Wooden House Joining Hardware > Original Hardwares > Joint Hardware
Corner Bracket
Kaneshin
4.50(2)
0.98 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, HOUSEPLUS Resident Warranty: HP11-KT010/HP11-KT012, Notice No.1460 No.2: IsIs, N Value: (Center pillar)1.1, (corner pillar)1.0, Short Allowable Tensile Strength (kN): (Center pillar)6.3, (corner pillar)5.8, Plate Thickness (mm): 1.6, Surface Processing: Hot-dip zinc-6% aluminium-3% magnesium alloy coated steel sheets, Dimension (mm): 60x40, Material: ZAM * (MSM-HC-DZC90 or MSM-CC-DZC90), Accessories: (No. 45) Rectangular-head screw CPQ-6(Gray) x 6 pcs.
Category Wooden House Joining Hardware > Original Hardwares > Joint Hardware
Both Screw Bolts And Nuts
Naniwa Bolt
3.75(4)
1.59 - 12.09 SGD
Category Wooden House Joining Hardware > Z Mark Hardwares > Double Pulling Bolt
Metal Corner Bracket
Tanaka
5.31 SGD
ADD TO CART
Caution: For tightening dedicated angle bit screw TBA-65D and TBA-30 , please use the (optional) third square bit., Purpose: Used to connect pillar and horizontal beam, Proof Strength Test: Short-period standard tensile strength/8.3kN, Laws and Regulations: Second issue Notification No. 1460 (to), Surface Processing: Hot-dip galvanized steel sheet (Z 27) , Standard: No. No. 01A3046 goods and Testing Center for Construction Materials Performance Test , Dimension (mm): 25x120x120, Thickness (mm): 3.2, Material: JIS G 3302 SGCC or SGHC (steel strip and hot-dip galvanized steel sheet), Accessories: Dedicated angle Bittobisu (TBA-65D) x4 lines, (TB-101) x4 this
Category Wooden House Joining Hardware > Original Hardwares > Joint Hardware
Right Angle Bracket
Kaneshin
5.00(1)
1.23 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Tensile yield strength (middle pillar / corner posts) Short-term standard junction (Pot) 6.0kN / 5.9kN, junction magnification (N value) 1.1 / 1.1, Surface Processing: -6% Molten zinc aluminum -3%, magnesium alloy plated steel sheet , Standard: HP11-KT011 / HP11-KT013 (stock) performance test house plus confirmatory test, Dimension (mm): 60x40x1.6, Material: (MSM-CC-DZC90 or MSM-HC-DZC90) ZAM ※, Accessories: Pillar side dedicated screw CPQ-45 (gray) x3 lines, foundation dedicated side screw CPQ-75 (Blue) x3 this
Category Wooden House Joining Hardware > Original Hardwares > Joint Hardware
Hexal Bolt Nut
Naniwa Bolt
0.79 - 4.24 SGD
Category Wooden House Joining Hardware > Z Mark Hardwares > Hexagon Bolt and Washer
Hardware Screw
Kanai
5.00(1)
3.18 - 22.92 SGD
Category Wooden House Joining Hardware > Original Hardwares > Hardware Screw
Anchor Bolts
Off-Brand
5.00(1)
1.90 - 169.90 SGD
Screw Diameter: M12, Material: Carbon steel
Category Wooden House Joining Hardware > Z Mark Hardwares > Anchor Bolt
Lag Screw
Naniwa Bolt
4.60(5)
0.40 - 1.71 SGD
Screw Diameter: M12, Material: Iron
Category Wooden House Joining Hardware > Z Mark Hardwares > Lag Screw
Construction Bracket Main Plate
Kanai
4.00(1)
0.80 SGD
ADD TO CART
Testing Center for Construction Materials: No. No. 10A2964, Notice No.1460 No.2: The, N Value: 1.0 or less, Short Allowable Tensile Strength (kN): 5.2, Plate Thickness (mm): 0.6, Surface Processing: Zinc alloy, Dimension (mm): 100x45, Material: SuperDyma NSDC570, Accessories: Bis YA-S45 (Silver) x6 Movies
Category Wooden House Joining Hardware > Original Hardwares > Joint Hardware
Wing Plate Bolt
OsakaSpirit
4.50(4)
1.60 - 81.71 SGD
Overall Length L (mm): 280
Category Wooden House Joining Hardware > Z Mark Hardwares > Battledore Bolt
Brace Hardware
OsakaSpirit
4.33(6)
13.04 SGD
ADD TO CART
Using Connector: (1 NAIL) 6-ZF55, (SMALL SQUARE WASHERS)2-W2.3 x 30 (HEXAGON BOLT, HEXAGON NUT) 2-M12, (SQUARE WASHERS)2-W4.5 x 40, Surface Processing: Hot-dip galvanizing, Standard: Z MARKED CONNECTOR, Material: JIS G3302 Hot dip galvanized steel
Category Wooden House Joining Hardware > Z Mark Hardwares > Flint Hardware
Joint Bracket, "New Kuru-Pita"
Aim
14.08 SGD
ADD TO CART
Set Contents: Joint metal fittings (material welded to 2 steel pipes of phi 22 mm outer diameter and 2.8mm-thick) x 1 piece, bolt (M16) x 2 (with 1 taper and 1 long screw)
Category Wooden House Joining Hardware > Original Hardwares
Anchor Bolts
Off-Brand
7.32 - 109.90 SGD
Screw Diameter: M16, Material: Carbon steel
Category Wooden House Joining Hardware > Z Mark Hardwares > Anchor Bolt
Flat Plate SD
Tanaka
5.00(1)
1.24 SGD
ADD TO CART
Performance Certified: S10A04-02, Notice No.1460 No.2: Is, N Value: Under 1.1, Short Allowable Tensile Strength (kN): 5.9, Surface Processing: Alloy coated steel sheets, Thickness (mm): 0.6, Material: NSDC570/ZYXK18, Accessories: Exclusive (No. 3) bit angle screws (TB-45)x6 pcs, Application: Used to connect pillar and foundation, pillar and horizontal beam
Category Wooden House Joining Hardware > Original Hardwares > Column Joint Hardware
Screw Stopper Omega Brace
Tanaka
3.50(2)
13.29 SGD
ADD TO CART
Equality Certificate: D15A08-01, Surface Processing: equivalent toJIS G 3302 (Z27), Standard: Japan Housing and Wood Technology Center, certified goods Z MARK hardwire (Chisel HB) EQUIVALENT CERTIFICATION, Thickness (mm): 1.6, Material: NFG550F, Accessories: Special (NO. 3) ANGLE OF bit screw (TBA-65D) x 12 BOOK, Application: Reinforcement of corners of roof truss and floor framing. Can be used as base of flint.
Category Wooden House Joining Hardware > Original Hardwares > Flint Hardware
Joint Tool, Hole Down Corner 10kN
Tanaka
5.00(1)
6.01 SGD
ADD TO CART
Short Standard Joint Strength (kN): (Corner of mast-)12.4, Performance Certified: S10A02-06, HOUSEPLUS Resident Warranty: HP08-KT031, Notice No.1460 No.2: To, N Value: 2.5 or less, Short Allowable Tensile Strength (kN): (In the mast-)13.5, Surface Processing: Alloy coated steel sheets, Thickness (mm): 2.3, Material: NSDHC/ZYXK18, Accessories: Special (NO. 3) ANGLE OF bit screw (TBA-65D) x 6 BOOK, Application: Used to connect pillar and horizontal beam
Category Wooden House Joining Hardware > Original Hardwares > Brace Joint Hardware
Steel Post Type L
Off-Brand
4.78(9)
7.02 - 199.90 SGD
Caution: Screws are not included Closing materials to mounting,Please fix firmly vertically with four screws, Surface Processing: Hot-dip galvanized, Type: L type
Category Wooden House Joining Hardware > Floor Materials > Foundation Post and Steel Foundation Post
Battledore Hardware Screw
Kaneshin
5.00(1)
2.47 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Materials are pulled in combination with Hex bolts ( M12), Proof Strength Test: Short-term tensile strength reference junction (P0t) 10.7kN, N Value: 2, Laws and Regulations: Daira 12 public notice No. 1460 advice no. 2 (to), Surface Processing: Chromate plating (JIS H 8610 class 2 level 2 Ep-Fe/Zn5/CM2), Standard: BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT RECEIPT NUMBER 06A NO.2653 , Material: JIS G 3131 SPHC, Accessories: BIS CPQ-75 (BLUE) X 5
Category Wooden House Joining Hardware > Original Hardwares > Battledore Hardware
Post Fitting Bracket
Tanaka
5.00(2)
4.21 SGD
ADD TO CART
Purpose: To connect shed joist and pole plate, pole plate and column, girth and floor beam, and through pillar and girth., Proof Strength Test: Short acceptability tensile storess proof 8.0kN, N Value: 1.5 or less, Laws and Regulations: Second issue Notification No. 1460 (to), Surface Processing: JIS H 8610 (electro-galvanized) Grade 2 Ep-Fe / Zn 5 / CM2 C , Standard: Goods and Japan Housing and Wood Technology Center performance certification , Dimension (mm): 40x280, Thickness (mm): 3.2, Material: (Satisfying carbon steel strength division 4.6) (plate portion) JIS G 3131 (steel strip and hot rolled mild steel plate) SPHC (bolt portion) JIS B 1180, Accessories: Dedicated angle Bittobisu (TBA-65D) x4 this
Category Wooden House Joining Hardware > Original Hardwares > Battledore Hardware
Flat Bracket
Kaneshin
3.00(1)
3.71 SGD
ADD TO CART
Caution: Screw joints for squareuare bits (# 3) is not included. Install the hardware necessary to the body column base and column head joints.For the brace , please be sure to use 7 joining screws, Purpose: It is the hardware which joins easily and firmly braces for wall magnification (90-105x45)., Laws and Regulations: Daira 12 public notice No. 1460 advice no. 1 (to), Plate Thickness (mm): 0.6, Standard: (GOODS) 2435 NO. 06 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 2331 NO., Material: NSS431DP-2 (high intensity diplophase stainless steel), Accessories: (No. 45) Rectangular-head screw CPQ-15(Gray) x 6 pcs.
Category Wooden House Joining Hardware > Original Hardwares > Brace Joint Hardware
Countersunk Screw Diagonal Brace Box II
Kanai
5.16 SGD
ADD TO CART
Caution: Screws should be striked; 4pcs on column, 4pcs on horizontal member, 7pcs on diagonal brace. Use attached screws., Laws and Regulations: Corresponding to (d) 1, No. 1460 No. 1 Section Ministry of Land, Infrastructure and Transport Notification, Plate Thickness (mm): 2.3, Surface Processing: De to yuraru Court, Standard: No. No. 03A2113 (Foundation) Testing Center for Construction Materials accepted, Material: SPHC (JIS G3131), Accessories: YA-S45x15 Movies
Category Wooden House Joining Hardware > Original Hardwares > Brace Joint Hardware
Hex Plate Bracket SD
Tanaka
5.00(1)
4.24 SGD
ADD TO CART
Caution: For tightening dedicated angle bit screw TBA-45, please use the (optional) third square bit., Purpose: For joining the end of the braces of 90mm x 90mm (3 times magnification wall) and braces of 45mm x 90mm (Double wall magnification), Proof Strength Test: 45 x 90 mm brace joints: per 1 m of goods and Japan housing & wood technology center performance certified bracing walls allowed 3.23 kN shear _ 000 D x _ 45 x 90 mm brace joints: per 1 m of goods and Japan housing & wood technology center performance certified bracing walls allowed 3.23 kN shear _ 000 D x _, Laws and Regulations: Notice No. 1460 No. 1(Ni and Ho), Surface Processing: Zn-11% Al-3% Mg-0.25 Si alloy coated steel sheet (superdyma), Dimension (mm): 170x170, Thickness (mm): 0.6, Material: NSDC 570: ZYXK18 (NEW JAPAN I...
Category Wooden House Joining Hardware > Original Hardwares > Brace Joint Hardware
Rafter Clamp II
Kaneshin
1.07 - 1.36 SGD
Dimension W (mm): 45, Material: ZAM(MSM-CC-DZC90), Accessories: (ZN40) x5 this thick nails
Category Wooden House Joining Hardware > Original Hardwares > Rafter Hardware
Flange Nut, "Zaboru II"
Kohwa
1.21 SGD
ADD TO CART
Caution: Please open the lower hole phi18 to use this product. Please secure the bits firmly so that they do not come off during construction Those of 294N m (torque) or higher is the best impact wrench to use.Always fit the product to the threaded portion of the b, Surface Processing: BIK COAT, Length L(mm): 35, Standard: JAPAN 08 A 1261 HOBBY BUILDING MATERIALS TEST CENTER PUBLISHING QUALITY PERFORMANCE TEST REPORT NUMBER, Diameter (phi mm): 45, Material: SWCH10R
Category Wooden House Joining Hardware > Original Hardwares > Washer Bolt Nut
Bracket
Kaneshin
4.50(2)
3.71 - 6.19 SGD
Surface Processing: Hot-dip galvanized steel sheet (Z27), Material: SGCC or 3302 SGHC JIS G, Accessories: (ZN65) x10 this thick nails
Category Wooden House Joining Hardware > Original Hardwares > Sleeper Bracket Metal and Joist Hanger
Bracket II
Tanaka
4.71(7)
7.08 - 7.95 SGD
Caution: Please cut ground-beam sleeper shorter than 16 mm (8 mm one side) than the sill between inner dimensions If you are installing a ground-beam sleeper of 105 angle to the base of the 105 angle , the hardware bottom and strip footing may interfere , so ple, Purpose: Use as junction of large pull pivot and foundation., Surface Processing: Hot-dip galvanized steel sheet (Z27), Thickness (mm): 2.3, Material: SGHC JIS G 3302 (HOT DIP GALVANIZED STEEL SHEETS AND STRIP) OR SGCC, Accessories: PRIVATE SERVICE (STB-55) x 9 BOOK
Category Wooden House Joining Hardware > Original Hardwares > Sleeper Bracket Metal and Joist Hanger

1 2 3 4 5 6 7 8 9 10 ...13 Next