Buy more than* S$200* and get FREE SHIPPING

FA and Mechanical Parts

Sort by:
Showing 1 - 60 of 16,497 Results
Show: 30 60 90
VIEW: Grid View List View
Electromagnetic Switches And Contactors, S-N Type
Mitsubishi Electric
57.48 - 2,599.90 SGD
Category FA and Mechanical Parts > Controlled Equipments > Electromagnetic Switch (Magnet Switch) and Electromagnetic Contactor (Magnet Contactor)
Packing USH Series
NOK
3.89 - 50.90 SGD
Type: Standard, Material: NITRILE RUBBER (A505)
Category FA and Mechanical Parts > Mechanical Parts > Oil Seal, O Ring, Gasket and Piping Accessories
Wall Mounting Bracket
Nikkei Mfg.
3.00(3)
16.27 - 39.88 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category FA and Mechanical Parts > Controlled Equipments > Rotary Light and Signal Lamp
Air Gun
Cup-Kurita
5.00(6)
17.49 - 25.77 SGD
Nozzle Length (mm): 22
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > Air Gun, Nozzle, Engine Cleaner and Tire Checker
Packing LBH Series
NOK
3.89 - 139.90 SGD
Fluid: External dust, Operating Temperature Range (deg C): -25 to +100, Type: Standard, Material: Nitrile rubber (A505)
Category FA and Mechanical Parts > Mechanical Parts > Oil Seal, O Ring, Gasket and Piping Accessories
KGN-Control Box
IDEC
4.50(2)
11.85 - 98.23 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category FA and Mechanical Parts > Controlled Equipments > Control Panel Board, Enclosure, and Accessories for Panel Board
Liquid Level Relays Standard Set
Kasuga Electric Works
4.50(2)
129.90 - 269.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., TBL13FC (for oil) is not explosion-proof construction. Please use based on related laws and regulations., Cord Length (m): 3
Category FA and Mechanical Parts > Controlled Equipments > Electrode Bar, Electrode Holder, Floatless Switch, and Float Switch
V-Belt Standard M Type
Bando Chemical Industries
5.47 - 14.63 SGD
Category FA and Mechanical Parts > Bearings and Transmission Equipments > Belt
RS Standard Sprocket RS40 1B Type
Tsubakimoto Chain
4.00(1)
5.41 - 76.13 SGD
Specification: Standard
Category FA and Mechanical Parts > Bearings and Transmission Equipments > Sprockets and Idle Pulleys
Polyethylene Foam, Gray
Akitsu
5.00(3)
3.41 - 64.85 SGD
25% Compressive Hardness (MPa): 0.09, Density (kg/m3): 64, Color: Gray
Category FA and Mechanical Parts > Materials - Cut Sheet, Plate, Rod, Pipe, and Sheets > Sponge Rubber (NBR, CR, Silicone) and Polyurethane Foam
KGNW-Type Control Box
IDEC
5.00(1)
11.62 - 24.26 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Rated Insulation Voltage (V): 600, Hole Diameter (phi mm): 22.2
Category FA and Mechanical Parts > Controlled Equipments > Control Panel Board, Enclosure, and Accessories for Panel Board
Gas Spring Y2 Series
TOKICO
45.09 - 51.55 SGD
Category FA and Mechanical Parts > Mechanical Parts > Gas Springs
RS Standard Sprocket RS60 1A Type
Tsubakimoto Chain
11.45 - 179.90 SGD
Roller Diameter (mm): 11.91, Using Chain: RS60, Number of Rows: 1, Pitch (mm): 19.05, Specification: Standard
Category FA and Mechanical Parts > Bearings and Transmission Equipments > Sprockets and Idle Pulleys
Stainless Steel Ball
OsakaSpirit
10.02 - 23.29 SGD
Material: SUS304
Category FA and Mechanical Parts > Mechanical Parts > Lever, Handle, Knob, Grip and Grip Ball
All Anchors, C Type
Sanko Techno
4.88(8)
27.56 - 189.90 SGD
Category FA and Mechanical Parts > Screw, Bolt and Nail > Anchor Bolt
V-Belt Standard K Type
Bando Chemical Industries
4.60(5)
5.55 - 26.39 SGD
Upper Belt Width (mm): 8, Belt Height (mm): 6
Category FA and Mechanical Parts > Bearings and Transmission Equipments > Belt
Linemate Hose 3130-03
Nitta Moore
4.50(2)
19.02 - 289.90 SGD
Inner Diameter (mm): 4.8, Outer Diameter (mm): 10.4, Inside Diameter (inch): 3/16, Minimum Bending Radius (mm): 30
Category FA and Mechanical Parts > Hydraulic Equipment and Hydraulic Pressure Hose(High-Pressure Hose) > Nitta Oil Pressure (High Pressure) Resin Hose, Coupling
Countersunk Head Machine Screw, Stainless Steel
OsakaSpirit
8.89 - 9.88 SGD
Category FA and Mechanical Parts > Screw, Bolt and Nail > Machine Screw
Foam Urethane Sheet, Urethane Acoustic Material
INOAC
22.87 - 63.37 SGD
Category FA and Mechanical Parts > Materials - Cut Sheet, Plate, Rod, Pipe, and Sheets > Rubber Sheet (Natural, CR, NBR, CNR, Silicone, EPDM, Urethane, and Fluorine, etc.)
Mini Indicator Lights
Maruyasu Dengyo
4.00(4)
4.87 - 11.69 SGD
Heat-Resistant Temperature (deg C): 60
Category FA and Mechanical Parts > Controlled Equipments > Switch and Indicator Light
Oil Seal
NOK
4.36 - 9.31 SGD
Specification: Nitrile rubber
Category FA and Mechanical Parts > Mechanical Parts > Oil Seal, O Ring, Gasket and Piping Accessories
Foamed Polyethylene Sheet
INOAC
26.72 - 70.31 SGD
Density (kg/m3): 65, Width (mm): 1000, Length (mm): 1000
Category FA and Mechanical Parts > Materials - Cut Sheet, Plate, Rod, Pipe, and Sheets > Sponge Rubber (NBR, CR, Silicone) and Polyurethane Foam
Resin Bearing DR-B, Screw Shaft Type) TYPE6
TOK Bearing
5.00(6)
0.85 - 4.80 SGD
Category FA and Mechanical Parts > Bearings and Transmission Equipments > Resin Bearings, Plastic Bearings and Bancollan Bearings
Hex Socket Head Screw, Stainless
OsakaSpirit
7.69 - 9.59 SGD
Category FA and Mechanical Parts > Screw, Bolt and Nail > Bolt
SSA Spur Gear
Kohara Gear Industry (KHK)
4.71(7)
4.87 - 349.90 SGD
Teeth Cutting Reference Surface: Hole, Tolerance A: H7, Surface Finish: Cutting, Pressure Angle (Degree): 20, Material: S45C
Category FA and Mechanical Parts > Bearings and Transmission Equipments > Gear and Rack
Electromagnetic Contactor
Togami Electric Mfg.
4.00(6)
23.57 - 489.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category FA and Mechanical Parts > Controlled Equipments > Electromagnetic Switch (Magnet Switch) and Electromagnetic Contactor (Magnet Contactor)
Copper Round Pipe
Hikari Mole
4.60 - 7.85 SGD
Material: C-1220T
Category FA and Mechanical Parts > Materials - Cut Sheet, Plate, Rod, Pipe, and Sheets > Plate, Punching Plate, Mesh Plate, Round Bar, Pipe, and Scroll (Metal)
Acrylic Board (Transparent)
Hikari
4.78 - 159.90 SGD
Specific Gravity: 1.2, Material: Acrylic
Category FA and Mechanical Parts > Materials - Cut Sheet, Plate, Rod, Pipe, and Sheets > Resin Plate (MC Nylon, Acrylic, PVC, Polycarbonate, and POM)
Gas Springs
Tochigiya
4.20(5)
33.14 SGD
Durability: More than 30000 times, Tensile Strength (kN [kgf]): More than 4.91 [500], Allowable Temperature (degreeC): -20 - 80, Application: OA equipment, medical equipment, machine tools , etc.
Category FA and Mechanical Parts > Mechanical Parts > Gas Springs
Low Resilience Urethane Foam
WAKI
4.80(5)
3.37 - 38.85 SGD
Color: Black, Material: Urethane foam
Category FA and Mechanical Parts > Materials - Cut Sheet, Plate, Rod, Pipe, and Sheets > Rubber Sheet (Natural, CR, NBR, CNR, Silicone, EPDM, Urethane, and Fluorine, etc.)
Flow Meter
Nitto Kohki
96.65 SGD
ADD TO CART
Screw Size: 3/8 in., Torque Value N m (kgf cm): 12(122), Pressure Resistance (MPa [kgf/cm2]): 0.8[8], Dimensions H2(mm): Hex 26, Dimensions H1 (mm): Hex 23, Dimensions T2 (mm): Rc3/8, Dimensions T1 (mm): Rc3/8, Maximum Working Pressure (MPa [kgf/cm2]): 0.5[5], Dimensions D (mm): 33, Peak Flow Rate (L/min): 18 (0 - 18 adjustable), Material (Seal): Nitrile rubber, Dimensions L (mm): 89, Operating Temperature Range (deg C): 10 - 60, Weight (g): 190, Size: Rc3 / 8 (female thread) at both ends, Material: Body / brass, pipe scale / polycarbonate resin (PC)
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > Coupler and Lever Coupling
PS Plastic Spur Gear
Kohara Gear Industry (KHK)
5.00(6)
8.33 - 119.90 SGD
Teeth Cutting Reference Surface: Hole, Surface Finish: Cutting, Pressure Angle (Degree): 20, Material: MC901
Category FA and Mechanical Parts > Bearings and Transmission Equipments > Gear and Rack
Vacuum Blow Gun for High Pressure
BeHAUS
2.25(4)
99.50 SGD
ADD TO CART
Caution: This product is high pressure only. Please pay attention about that the outlet is a high pressure coupler, the low-pressure coupler is not connected., Body Weight (g): About 300, Maximum Working Pressure (MPa): 3.0 (The maximum pressure that can be used continually), Accessories: (Only suction work) Etching nozzle, brush nozzle, straight nozzle, nozzle extension pipe, dustbag, suction hose, fixing band x 2
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > Air Gun, Nozzle, Engine Cleaner and Tire Checker
Grease Filler Nipple
THK
4.00(2)
0.44 - 2.24 SGD
Category FA and Mechanical Parts > Mechanical Parts > Grease Nipples and Cups
Oil-Resistant Rubber Hose F-15
Togawa Rubber
17.60 - 3,729.90 SGD
Purpose: General hydraulic plumbing hose, for low and medium pressure
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > Hose and Hose Reel
DKI Series Packing
NOK
5.00(6)
5.22 - 409.90 SGD
Category FA and Mechanical Parts > Mechanical Parts > Oil Seal, O Ring, Gasket and Piping Accessories
Kalei nut (iron / trivalent chromate)
Nippon Pop Rivets and Fasteners
5.00(3)
20.72 - 56.20 SGD
Hardness: (Use of base metal) Hv300 below, Material: Steel
Category FA and Mechanical Parts > Screw, Bolt and Nail > Press Fastener, Clinching Fastener and Insert Nut
Hand Truck Stopper, "Hammer Lock"
Hammer Caster
4.00(1)
46.52 - 64.38 SGD
Caution: Never use as jack. It is stopper of wheels attached trolly , and lifting is not the purpose Please be sure to attach between swivel casters Please mount the pedal outside so that legs do not nip between installed frame and pedal at the time of installi, Mounting Dimensions (mm): 85x85(100x100), Mounting Seat A x B (mm): 120x120, Caution: Make sure to install hammer lock between swivel casters
Category FA and Mechanical Parts > Caster > Stopper
Electronic Buzzer
Panasonic
3.89(9)
11.84 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Using Electric Wire : Single line of 0.8mm 0.5mm 2 or 20 lines / 0.18mm, Wiring Distance Capable: (By wire 0.5mm 2 or more) 10m
Category FA and Mechanical Parts > Controlled Equipments > Bell, Buzzer, and Speaker
Snap drain
CKD
4.50(2)
94.70 - 139.90 SGD
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > Pneumatic Auxiliary Device (Filter Regulator Lubricator, Etc.)
Urethane Foam Wavy
WAKI
4.33(6)
21.15 - 33.58 SGD
Dimensions (Width x Length) (mm): 400x400, Color: Gray, Thickness (mm): 30, Material: Urethane
Category FA and Mechanical Parts > Materials - Cut Sheet, Plate, Rod, Pipe, and Sheets > Rubber Sheet (Natural, CR, NBR, CNR, Silicone, EPDM, Urethane, and Fluorine, etc.)
Revvo Caster, For Heavy Load) With Swivel Caster Stopper
Katsuyama machines
299.90 - 339.90 SGD
Mounting Base T1 x T2(mm): 150x110, Boss Width B (mm): 63, Attachment Pitch (mm) (P1xP2): 121x59
Category FA and Mechanical Parts > Caster > Heavy Duty Caster
Plastic Air Duster, "Joplastar II"
Joplax
20.10 SGD
ADD TO CART
Connection Port: Air suction mouth:G(PF) 1/4 female screw (JS-02 plug standard equipment) Nozzle: M14 P=1.0 male screw Minimum diameter of nozzle: phi3mm x 1 hole, Compatible Fluid: Air, Operating Temperature (deg C): 0 - 50, Normal Working Pressure (MPa): Less than 0.98, Discharge Rate (L/min): 40-290(at 0.5Mpa), Dimensions B (mm): 128, Dimensions A (mm): 133.5, Maximum Working Pressure (MPa): 1.47, Weight (g): 90, Material: Body: PP O-rings: Viton Valve guide: PP Packing: Viton Valves: PP Y gasket: Viton Flow control valve: PP, TRUSCO Part Number: 292-4480, Accessories: PF1/4 both male screw nipple x 1 (nipple comes with a standard O ring.)
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > Air Gun, Nozzle, Engine Cleaner and Tire Checker
Compression Spring Ap, Piano Wire
Showa Spring
3.01 - 129.90 SGD
Material: Piano wire (SWP-A)
Category FA and Mechanical Parts > Mechanical Parts > Spring
NCS Series General Purpose Large Metal Connector Straight Plug
Nanaboshi Electric Mfg.
6.76 - 89.25 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category FA and Mechanical Parts > Controlled Equipments > Connector and Harness
Stainless Steel Hinges
TRUSCO
5.00(1)
7.63 - 12.07 SGD
Category FA and Mechanical Parts > Mechanical Parts > Hinges, Door Parts, Catch Clip and Magnet Catch
Compression Spring As, Stainless Steel Wire
Showa Spring
7.01 - 85.67 SGD
Category FA and Mechanical Parts > Mechanical Parts > Spring
Linear Shaft
MonotaRO
3.04 - 11.52 SGD
Surface Roughness (micrometer Rmax): 1.5, Effective Quenched-hardened Layer (mm): 1 or more, Material: SUJ2 (high carbon chrome steel bearing)
Category FA and Mechanical Parts > Bearings and Transmission Equipments > Linear Shaft, Linear Bushing and Linear Pack
N2 Series 5 M White Nylon Tube
Nitta Moore
4.40(5)
6.73 - 21.27 SGD
Purpose: For multi-purpose piping use, Negative Pressure Performance (kPa): -101.294, Length (m): 5
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > Fittings for Tube and Tube Cutter
Belt Tension Meter T-ACE
Tsubakimoto Chain
799.90 SGD
ADD TO CART
Belt Span Length (m): 0.001 to 9.999, Rough Unit Mass (kg/m): 0.001 to 9.999, Power: Single 4 x four, Operating Temperature Range (deg C): -10 To + 60, Weight (g): 160 (body only), Measuring Range: 0.1 ~ 9999N, 30 ~ 600Hz, Thickness (mm): 30, Width (mm): 61.6, Length (mm): 162
Category FA and Mechanical Parts > Bearings and Transmission Equipments > Belt
PVC Vacuum Hose, "TOYOSPRING HOSE",19x26
Toyox
4.00(2)
10.26 - 469.90 SGD
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > Hose and Hose Reel
420P0S Swivel Caster, Nylon, Rubber Wheel B
Hammer Caster
5.00(1)
50.92 SGD
Wheel No.: 434S, Material (Body): Resin (nylon)
Category FA and Mechanical Parts > Caster > Static Sound (Noise Prevention) Type Caster
Electromagnetic Contactor Standard Type, No Case Cover
Fuji Electric
28.68 - 1,719.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category FA and Mechanical Parts > Controlled Equipments > Electromagnetic Switch (Magnet Switch) and Electromagnetic Contactor (Magnet Contactor)
Toggle Switch MS-500 Series
Miyama Electric
5.00(7)
2.38 - 6.97 SGD
Current Capacity: 6A125V.AC, Contact Resistance (mohm): 20 Or less (max)
Category FA and Mechanical Parts > Controlled Equipments > Switch and Indicator Light
Polyethylene Foam, Blue
Akitsu
4.67(3)
3.41 - 63.66 SGD
25% Compressive Hardness (MPa): 0.09, Density (kg/m3): 64, Color: Blue
Category FA and Mechanical Parts > Materials - Cut Sheet, Plate, Rod, Pipe, and Sheets > Sponge Rubber (NBR, CR, Silicone) and Polyurethane Foam
Snap Ring Et Electrode Holder for E Rings
OsakaSpirit
4.62(8)
33.19 - 50.90 SGD
Category FA and Mechanical Parts > Screw, Bolt and Nail > Retaining Ring and Other Rings
Polycarbonate Plate, Transparent, 8mm
Off-Brand
11.83 - 279.90 SGD
Burning Resistance: Self-extinguishing, Water Absorption Rate (%): 0.24, Rockwell Hardness: (M scale) 67, Total Light Transmission (%): 89, Specific Gravity: 1.2, Material: Polycarbonate
Category FA and Mechanical Parts > Materials - Cut Sheet, Plate, Rod, Pipe, and Sheets > Resin Plate (MC Nylon, Acrylic, PVC, Polycarbonate, and POM)
Quick Seal Fitting Connector
Nitta Moore
5.00(3)
2.55 - 7.28 SGD
Negative Pressure Performance (kPa): -101.294, Material: Brass
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > One Touch Fittings and Other Fittings
All Stainless Steel Hose Clamp Has Type
TRIDON
3.70 - 15.10 SGD
Specification: Interlock design (special construction design PAT) structure
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > Hose Band
Yodoflon PTFE Tube 8x6
Yodogawa Hu-Tech
5.00(2)
11.66 - 219.90 SGD
Thickness (mm): 1, Outside Diameter x Inside Diameter (phi mm): 8x6
Category FA and Mechanical Parts > Compressor,Coupler,Pneumatic Equipment,Hose and Tube > Fittings for Tube and Tube Cutter

1 2 3 4 5 6 7 8 9 10 ...275 Next