Caution: During locking and unlocking, do not apply excessive force (impact) to the body.There is risk of damage. If there is a risk of applying excessive force, please provide a stopper., Purpose: Measuring instrument, OA equipment, furniture, etc., Material and Processing: (Covering) ABS / brown (yoke, keeper) SPCC/Br (magnet) ferrite /-, Adsorption Strength (N [kgf]): About 17 (1.7), Weight (g): 31.5
Material and Processing: (Case, keeper) POM/black (latch) PA/black (guide lever, spring) SUS304/-, Operating Temperature Range (deg C): -30 - 80, Weight (g): 1.3, Caution: Please do not apply excessive force (impact) to body to lock and unlock. There is risk of damage., Specification: Tenacity N (kgf) / about 19.6 (2) (*initial strenth under room temperature, horizontal direction to the body), Application: Audio equipment, household appliance, etc.
Material and Processing: Gloss barrel polishing SUS304 / (cover received body cover ?) SUS304 / (Bath received body base ?) - (knob) SUS303 / Gloss barrel polishing (rod) SUS303 / barrel polishing ( spring) SUS304WP / -, Weight (g): 198, Application: Special equipment vehicles, gates and other, Description: It is designed as determined operability and safety. It is ideal for equipment with a vibration especially .
Caution: 1. Do not use methods that door holds own weight like a canopy. 2. supporting part should be edge and corner R 0.3 and over, or do not chamfer. Bracket is not included., Purpose: Inside door of power board, distribution board, control panel, and other various of chassis, etc., Material and Processing: (Latch case stopper) POM / black (spring) SUS304 / - (cross socket head further tapping screw) S / Uc, Weight (g): 14.3, Compatible: /t0.8 T1.2 t1.6 t2.3 thickness, Specification: Operation: 1. latch is activated when you close the door. (Figure 1) (Stopper moves to top bracket and does not work.) 2. When you open the door, slide the knob fully. (Figure 2) (Hold the stopper that touches the bracket and keep the latch open: Open hol
Caution: If you pull the panel of move side during lock statement, it can be damaged., Purpose: Machine tools and measurement equipment, etc., Holding Force N (kgf): About 14.7(1.5), Material and Processing: (Box base stopper) SPCC / Ni (latch arm) SPCC (roller keeper) PA / white (shaft (A) (B) pin flat washer) BSBM / Ni (shaft (C) support) SUM / Ni (Spring (A) ) SWP / - (spring (B)) SWP / phosphate coating (E-type retaining ring) S / Zn, Weight (g): 35.5, Specification: Handle is not required when you use this product. Unlock stroke about 1.5mm.
Caution: *Countersink processing is required on tap drilling. Use the recommended jig. The screw should be inserted in the center of the jig. To remove, use monkey wrench or cut the washer with a nipper.* Can not be re-used after removal. , Purpose: Dropout prevention of screws and bolts, Material: SUS301-CSP
Caution: * Please make center deviation between body (10.8 mm width direction) and kee within +/- 0.15 mm. When using it as a door, make sure that the body (10.8 mm width direction) and the rotation axis of the door are parallel. Please do not pull out forcibly. Please do not apply excessive force (impact) to the main body when locking and unlocking. It may be damaged., Purpose: Audio equipment , home appliances etc., Operating Temperature Range (deg C): -10-60, Material: POM,PA,SUS304-WPB,SWPA,POM