Buy more than* S$200* and get FREE SHIPPING
Due to the maintenance, we will close our website on June/19 9:00-10:00 and June/23 0:00-0:30 JST.
All customers cannot shop on our website during the time. Thank you.
Caution: Does not give full play to the strength of the anchoring those smooth surfaces such as round bar, please do not use., Purpose: Concrete , rock , ALC , hollow base material, Material: (Base resin) Epoxy acrylate resin, Set Contents: Resin cartridge (150 cm3) single
1 mixing nozzle
One resin cartridge (1cm3)
Caution: Does not give full play to the strength of the anchoring those smooth surfaces such as round bar, please do not use., Purpose: Concrete , rock , ALC , hollow base material L-shaped and U-shaped bracket reinforcements Bracket installation on ALC, Material: (Base resin) Epoxy acrylate resin, Set Contents: Resin cartridge (500 cm3) single
2 mixing nozzles
Caution: *Please be sure to clean inside the hole. Please completely remove the water accumulated in the hole (moisture permeable). * When building at 0 degree or less, please use the wire brush to clean inside the hole. *Please inject resin from hole bottom , Purpose: Concrete / rock mass , ALC , hollow mother material , for brick., Content of Hazardous Material: 350mL, TRUSCO Part Number: 492-2158
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., Bolt Type: M8/M10/M12/M16/M20/M22/M24,W3/8/W1/2/W5/8/W3/4/W7/8/W1,D10/D13/D16/D19/D22/D25
Caution: Maximum tensile strength is the in-house experimental value using the (high-strength bolts) M threaded bolt. It may vary by actual construction that is only a guideline construction possible number., Maximum Tensile Load (kN): M8:23.0,M10 W3/8 D10:38.3,M12 W1/2 D13:60.8,M16 W5/8 D16:74.1,M20 W3/4 D19:154,M22 W7/8 D22:174,M24 W1 D25:184, Outer Diameter x Depth (mm x mm): (Perforation) 10x70, 12x90, 13x90, 14x100, 16x100, 18x130, 20x130, 22x170, 24x170, 25x190, 28x190, 28x210, 32x210, Bolt Type: M8 M10 M12 M16 M20 M22 M24,W3/8 W1/2 W5/8 W3/4 W7/8 W1,D10 D13 D16 D19 D22 D25, Quantitiy: Constructionofpossiblepercartridge:(M8)80lines,(M10)53lines,(W3/8D10)45lines,(W1/2)40lines,(M12D13)35lines,(M16)21lines,(W5/8)18lines,(D16)17lines,(M20)11lines,(W3/4D19)9lines,(M22W7/8)7lines,(D22)6li...
Caution: * Avoid direct sunlight, keep it in a well-ventilated place, where temperature does not rise so much. (Please do not exceed 40 degree C absolutely.) Please do not bring it close to fire or high temperature objects. * The cartridge is usable period under the standard storage condition until the expiration date. * Please be sure to throw out about the first 10cc when using the first time or replacing the nozzle., Purpose: Concrete, anchorage to bedrock. Foundation work such as steel frame. Underwater construction is possible., TRUSCO Part Number: 363-3110