Caution: During locking and unlocking, do not apply excessive force (impact) to the body.There is risk of damage. If there is a risk of applying excessive force, please provide a stopper., Purpose: Measuring instrument, OA equipment, furniture, etc., Material and Processing: (Covering) ABS / brown (yoke, keeper) SPCC/Br (magnet) ferrite /-, Adsorption Strength (N [kgf]): About 17 (1.7), Weight (g): 31.5
Material and Processing: (Cover) half-Brown glazed SPCC / paint (Spring) SWP/Uc (Rollers, receiver A) POM / Brown (Take B / plate) SPCC/Uc (Cross hole Pan head screws) S/Ni ( washer / PA-white (Axis) SS400/Br (Cushion) sponge /-, Stop Angle: About 35-75 (based on the balance of spring force and the weight of lid.), Weight (g): 97.4, Caution: With the cross hole pan head screw, the spring load cannot be adjusted. Please do not use outdoors, places of high temperature and moisture, and places with water. Please use auto hinge matching the weight of the lid at two or more locations. (If , Specification: Reference maximum spring-load P: about 40N (4.08Kgf), Application: OA equipment, audio instrument, etc.
Material and Processing: (Case, keeper) POM/black (latch) PA/black (guide lever, spring) SUS304/-, Operating Temperature Range (deg C): -30 - 80, Weight (g): 1.3, Caution: Please do not apply excessive force (impact) to body to lock and unlock. There is risk of damage., Specification: Tenacity N (kgf) / about 19.6 (2) (*initial strenth under room temperature, horizontal direction to the body), Application: Audio equipment, household appliance, etc.
Purpose: Power board, distribution board, control panel, etc., Key Number: No001-150 *Key number is not specified since it is random., Material and Processing: (Lock, collar) ZDC/Cr(wave washer) SUS / -(mounting nut) S/Zn(rotation rule cam, fastening-plate, and hexagon nut) SPCC/Zn(key) BSP/Ni, Weight (g): 81
Purpose: Cabinets, furniture, etc., Material and Processing: (L-shaped bracket and round washers) SPCC/Cr (Tack B) SWCH/Uc (washer N) / PA- (Arm) SWRM/Cr (stopper) / PA6- (Nut unit) S/Cr (tack A) BSW/Sn-Co "Cr colors", Allowable Load (N[kgf]): 147, Weight (g): 52, Model: Can be used for both left and right
Caution: Magnet base is not included, Purpose: Measuring instrument, OA equipment, furniture, etc., Material and Processing: (Base, case, spring receptacle / spacer) ABS / black (Slides) PA6 / black (Rotary) PC / Red (York) SS/Ni (black) (Ferrite) ferrite /- (Spring) SW-C /- (Nut) ZDC/Zn (Keeper) SPCC/Zn, Adsorption Strength (N [kgf]): About 11.8(1.2), Weight (g): 8.95, Specification: 1. Uunlock stroke /about 3.5 mm 2. Initial projection force during unlocking/ about 8.83 N (900 gf) 3. Nut tightening torque /0.29N / m (3 kgf / cm) maximum
Caution: When mounting with a countersunk screw or countersunk head rivet, please do some chamfering work on the side you are going to attach it to., Purpose: Cabinets, furniture, etc., Unlocking Force [kgf]: About 34.3(3.5), Material and Processing: (Arm / bracket) SPCC/Cr (leaf spring ) SUS301 /- (rivet )BSW/Cr Flat washers SPCC/Zn (washer) PA/primary colors (ball) / S-, Weight (g): 32.5