Buy more than* S$200* and get FREE SHIPPING

Dynamometer and Torque Meter

Sort by:
Showing 1 - 30 of 67 Results
Show: 30 60 90
VIEW: Grid View List View
Digital torque meter
AS ONE
2,319.90 - 2,679.90 SGD
Rated Torque (N m): 2, Range Measurement: 0.000-+/-2.000N/m, Display Range: 0.000-+/-2.000N/c/0.0-+/-200.0N/b, Resolution Capability: 0.001N/c/0.1N/b, Weight (kg): 8, Dimension (mm): 320x227x126
Category Dynamometer and Torque Meter
Single point load cell
A&D
159.90 SGD
Product Surface Size (mm): 300x300, Synthesis Error: 0.02%of R.O., Ultimate Overload Rating: 200%of R.C., Tolerable Overload: 150%of R.C., Insulation Resistance: 2000Mohm or more / DC50V (B / E), Applied Voltage (V): (Recommended) DC12, (maximum) DC15, Cable Outside Diameter (mm phi): 3.5, Effect of Temperature: (Zero point) 0.023% of RO / 10 ℃ (output) 0.014% of Load / 10 ℃ Typ., Dust-proof Water-proof: IP54, Temperature Compensation (deg C): -10-40, Rated Output: 2mV/V+/-10%, Resistance (omega): (Between the input terminal) 420 +/- 30 (between the output terminals) 350 +/- 5, Cable Length (m): 0.4, Type: Platform scale type, Specification: Zero balance / + / - 5% of RO
Category Dynamometer and Torque Meter
Screw Joint
Nitto Kohki
42.91 - 45.37 SGD
Category Dynamometer and Torque Meter
Digital torque analyzer
Nakamura Mfg.
2,239.90 SGD
ADD TO CART
Purpose: Inspection of the torque wrench. To quality management based on ISO9001., Operating Temperature (degree C): 0-40, Minimum Scale (N / m): 0.1, Torque Measuring Range (N-m): 5.0-200, Character Height (mm): 25, Dimensions (Width W x Depth D x Height H) (mm): 280x200x200, Minimum : 0.1, Power: AC100V 50/60Hz, TRUSCO Part Number: 392-2936
Category Dynamometer and Torque Meter
RS232C Cable
SHIMPO
129.90 SGD
ADD TO CART
Cord Length (m): 2, Compatible Models: FGP-02/0.5/1/2/5/10/20/50/100
Category Dynamometer and Torque Meter
Torque Gauge
Nakamura Mfg.
589.90 SGD
ADD TO CART
Purpose: Optimal ultra-precision machine, the measurement and the tightening of the small torque, such as electronic equipment., Chuck Diameter (mm): 1-8.5, Torque Measurement Range (CNM): 10-150, Minimum Scale (cN, m): 2, Outer Diameter (phi mm): 63, Weight (g): 600, Overall Length (mm): 134, TRUSCO Part Number: 417-4216
Category Dynamometer and Torque Meter
Lever type small measuring stand
Imada
969.90 SGD
ADD TO CART
Maximum Working Load (N): 1000, Body Dimensions (Width x Depth x Height) (mm): 200x280x410, Functions: Mechanical stopper, Body Weight (kg): About 7.3, Stroke (mm): 60
Category Dynamometer and Torque Meter
Wire Harness Measuring Instrument
Imada
1,589.90 SGD
ADD TO CART
Maximum Working Load (N): 500, Body Dimensions (Width x Depth x Height) (mm): 155x450x182, Stroke (mm): 85
Category Dynamometer and Torque Meter
Electric measurement stand
Imada
2,969.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Maximum Working Load (N): 500, Body Dimensions (Width x Depth x Height) (mm): 214x428x574, Power Source (AC V): 100-240
Category Dynamometer and Torque Meter
Softwear for ZP series
Imada
439.90 SGD
ADD TO CART
Caution: Digital force gauge ZP series dedicated software
Category Dynamometer and Torque Meter
Pantograph Chuck
Imada
339.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped.  ※ unaccompanied concerning the commodity, in the case of COD orders will be shipped after the next day, Maximum Working Load (N): 500, Body Dimensions (Width x Depth x Height) (mm): 73x19x101
Category Dynamometer and Torque Meter
Dynamometer Cam Chuck
Imada
299.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped., Maximum Working Load (N): 500, Body Dimensions (Width x Depth x Height) (mm): 36x22x64
Category Dynamometer and Torque Meter
Pin Chuck
Imada
119.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped., Maximum Working Load (N): 150, Mounting Screw Diameter: M6, Opening Width (mm): Maximum /phi0-3.2, Body Dimensions (Width x Depth x Height) (mm): 10x60, Body Weight (g): About 22, Material: iron
Category Dynamometer and Torque Meter
Vice Jig
Imada
339.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped., Maximum Working Load (N): 1000, Mouth Width (mm): 38, Body Dimensions (Width x Depth x Height) (mm): 80x133x45
Category Dynamometer and Torque Meter
Wedge chuck
Imada
5.00(1)
399.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Maximum Working Load (N): 1000, Body Dimensions (Width x Depth x Height) (mm): 46x14.5x59
Category Dynamometer and Torque Meter
Torque Checker
Nitto Kohki
3,069.90 SGD
ADD TO CART
Caution: ※ impact driver, cushion clutch driver, can not be used in the electric driver for the robot., Measurement Range (N m): 4.00-12.00, Battery Capacity (mAh): 700, Charging Time (hours): 8, Outer Dimensions (Width W x Height H x Depth D) (mm): 200x487x112, Continuous Opreration Time (hours): 15, Weight (kg): 1.4
Category Dynamometer and Torque Meter
Bit Joint
Nitto Kohki
53.41 SGD
ADD TO CART
Torque Range (N, m [kgf, m]): 0.015-0.25, Compatible Models: DLT1133
Category Dynamometer and Torque Meter
Bit Joint
Nitto Kohki
53.41 SGD
ADD TO CART
Torque Range (N, m [kgf, m]): 0.015-1.5, Compatible Models: DLT1133,DLT1633
Category Dynamometer and Torque Meter
Bit Joint
Nitto Kohki
56.64 SGD
ADD TO CART
Torque Range (N, m [kgf, m]): 0.015-1.5, Compatible Models: DLT1133,DLT1633
Category Dynamometer and Torque Meter
Bit Joint
Nitto Kohki
61.52 SGD
ADD TO CART
Torque Range (N, m [kgf, m]): 0.15-6.5, Compatible Models: DLT1633
Category Dynamometer and Torque Meter
Soft Joint
Nitto Kohki
249.90 SGD
ADD TO CART
Torque Range (N, m [kgf, m]): 4.0-12.0, Compatible Models: DLT1933
Category Dynamometer and Torque Meter
Hard Joint
Nitto Kohki
119.90 SGD
ADD TO CART
Torque Range (N, m [kgf, m]): 4.0-12.0, Compatible Models: DLT1933
Category Dynamometer and Torque Meter
Duralumin case
Nitto Kohki
269.90 SGD
ADD TO CART
Compatible Models: DLT1133,DLT1633
Category Dynamometer and Torque Meter
DELVO Screw Tightening Counter
Nitto Kohki
639.90 SGD
ADD TO CART
Input Power: AC100V, Dimensions (Width W x Depth D x Height H) (mm): 101x57x140, Cord Length (m): 1.5, Weight (g): 800, TRUSCO Part Number: 463-9952
Category Dynamometer and Torque Meter
Digital torque analyzer
Nakamura Mfg.
2,799.90 SGD
Category Dynamometer and Torque Meter
Digital Open Torque Measuring equipment Cap tester CTK-10NXL
Nakamura Mfg.
2,459.90 SGD
ADD TO CART
Chuck Diameter (mm phi): 22-180, 22-180, Minimum Measurable Value: 0.01N-m, 0.01N-m, Pricision: +/-1%+1digit, +/-1%+1digit, Measuring Range: 1-10N-m, 1-10N-m, Weight (kg): 11, 11
Category Dynamometer and Torque Meter
Attachment AT-3 for Torque analyzer
Nakamura Mfg.
41.61 SGD
ADD TO CART
Dimension (mm): 12x6.35, 12x6.35, Compatible: KDTA-N2SV KDTA-N10SV KDTA-N20SV?SVH, KDTA-N2SV KDTA-N10SV KDTA-N20SV?SVH
Category Dynamometer and Torque Meter
Attachment AT-9 for Torque analyzer
Nakamura Mfg.
639.90 SGD
ADD TO CART
Dimension (mm): 22x19-22-24, 22x19-22-24, Compatible: KDTA-N300SVH, KDTA-N300SVH
Category Dynamometer and Torque Meter
Weighing Indicator
A&D
1,009.90 SGD
ADD TO CART
Zero Adjustable Range: 0mV-20mV, 0mV-20mV, Non Linearity: 0.01% of F.S., 0.01% of F.S., Outer Dimensions (Width W x Height H x Depth D) (mm): 144x72x197, 144x72x197, Inside Resolution (G): 999,999d, 999,999d, Power: AC100V-240V(50/60Hz), AC100V-240V(50/60Hz)
Category Dynamometer and Torque Meter
Attachment AT-1 for Torque analyzer
Nakamura Mfg.
269.90 SGD
ADD TO CART
Dimension (mm): 12x5.5-6-7-8, 12x5.5-6-7-8, Compatible: KDTA-N2SV KDTA-N10SV KDTA-N20SV?SVH, KDTA-N2SV KDTA-N10SV KDTA-N20SV?SVH
Category Dynamometer and Torque Meter

1 2 3 Next