Purpose: For electric apparatus. Fixing of following items. Sealed cable of electromagnetic ray,short ring static electricity removal of shield switching transformer, sealed electrode of ground housing wiring., Adhesive Force (N/10mm/Reference Value): 3.43, Adhesive Force (N/25mm): 8.85, Tensile Strength (N/25mm): 98.1, Electric Resistance (ohm/cm2): 0.04, Base Material Thickness (mm): 0.035, Adhesive: Acrylics system conductivity, Tape Thickness (mm): 0.07, Core Diameter (mm): 76, Tape Length (m): 20, Base Material: Rolled copper foil, Color: Dark brown
Caution: Please note that pins may not be removable depending on the situation. Please do not use pins with sizes that don't fit.Pins may get damaged., Please note that pins may not be removable depending on the situation. Please do not use pins with sizes that don't fit.Pins may get damaged., 2015 Trusco Published Pages: 1 2329, Dimensions C (mm): 21, 21, Dimensions B (mm): 64, 64, Surface Processing: Nickel plating, Nickel plating, Dimensions A (mm): 12, 12, Material: SUS303G/C3604, SUS303G/C3604
Purpose: PCB storage in rework task, AS ONE Part Number: 1-8498-06, Surface Resistance Value (ohm): 104 - 10, Heat-Resistant Temperature (deg C): 110, Slot Depth (mm): Bottom-side/ 5
Back side /7.5, Outer Dimensions (Width W x Height H x Depth D) (mm): 270x93x207, Flute Width (mm): 3, Number of Flutes: 25, Pitch (mm): 9.5, Weight (g): 360, Material: Heat-resistant polypropylene (PP), TRUSCO Part Number: 334-6820
Caution: From 2009 October 1st, Permacel brand was unioned to Nikko Denko brand. Packaging specifications (paper cores, etc) change into the NITTO brand., Purpose: High heat resistant wire bundling, high frequency motor and traction motor insulation, small bobbin coil exterior insulation, large rotation machine coil insulation, thermistor part outer insulation magnet wire bonding, web solder board connector masking, vacuum based deposition electronic component temporary stops., MIL Standard: MIL-P-46112, UL Standards: File No.E20392 UL-510 Flame Retardant (flame retardant), Unwinding Force: (Force required to unwind 150Feet per minute) 557g / cm, Tensile Strength (kgf/cm): 9.8, Elongation (%): 65, Adhesion (g/10mm): 278 (vs. steel), Adhesive: Silicone series, Tape Thickness (mm): 0.1, With...
Purpose: Between layer of trance and coil etc, wrapping insulation. Heatproof masking of solder coat and plating etc of printed circuit board, Incombustibility: UL510 acceptable product, Heat-Resistant Temperature (deg C): 200, Adhesive: Silicon series, Tape Length (m): 20, Base Material: PI (polyimide)