All Category

Perforated Panel Racks

A punching rack is used to store small tools such as pliers by attaching hooks and other parts to a punching panel with numerous holes. There are various items on the punching panel, such as those with casters and those with double-sided type. Also, hooks and other parts can be stored in a variety of shapes such as scissors and pens, which can be stored neatly, and hooks for driver use. You can customize by combining the right parts for the tool you want to store.
View : Grid List
Filter

Items 1 - 40 of 105

Set Ascending Direction
  1. Box hook for punching panel
    TRUSCO Box hook for punching panel
    Allowable Load (kg)  Material  Steel (Unichrome plating finish)  Material / Finish  Steel (Unichrome plating finish)  Maximum Loading Capacity (kg)  Three 
    from S$33.99
    Min. 2 days
  2. Pen stand hook for punching panel
    TRUSCO Pen stand hook for punching panel
    Perfect for holding scissors, pens, etc.
    Maximum Loading Capacity (kg)  2 pieces 
    from S$21.99
    Min. 2 days
  3. Punching panel rack Panerina exclusive hook
    TRUSCO Punching panel rack Panerina exclusive hook
    Conventional hooks can also be used.
    Maximum Loading Capacity (kg)  2 pieces  Allowable Load (kg)  2 pieces  Mass (g)  200 
    from S$28.99
    Min. 2 days
  4. Plier hook for punching rack
    TRUSCO Plier hook for punching rack
    Attached to a punching panel, it is ideal for organizing and tidying up small tools, various pliers, and other tools that cannot be hooked. It is effective to attach it to a parts management rack with a punching panel or a tool wagon. If you hang the hook on the panel and tighten the attached scr... Read More
    Uniform Load (kg)  Maximum Loading Capacity (kg)  2 (per pc)  Material / Finish  Steel (Unichrome plating finish) 
    from S$18.99
    Min. 2 days
  5. Resin hook for punching panel
    TRUSCO Resin hook for punching panel
    It can be easily installed with one touch. It can be easily attached to the punching panel double-sided type. There are a total of 6 types, vertical type, horizontal type short and long, so you can hang tools for multiple purposes. One-touch hook for punching panel rack
    Allowable Load (kg)  1.5 / piece  Mass (g)  20 
    from S$10.99
    Min. 2 days
  6. Cutter hook for punching rack
    TRUSCO Cutter hook for punching rack
    ● Attached to a punching panel, it is ideal for organizing small tools, spanners, wrenches, etc. ●It is effective to attach to a parts management rack with a punching panel or a tool wagon. ●By hooking the panel and tightening the included screw, the hook will be fixed to prevent it from falling ... Read More
    Allowable Load (kg)  Uniform Load (kg)  Mass (g)  50  Length (mm)  50  Trusco Part No.  501-5031  Height (mm)  51.6  Opening Width (mm)  74  Opening Width W x Depth D x Height H (mm)  74×50×51.6  Material  Steel 
    from S$14.99
    Min. 2 days
  7. Punching panel
    TRUSCO Punching panel
    Dedicated panel for attaching hooks.
    Uniform Load (kg)  15  Maximum Loading Capacity (kg)  15  Mass (kg)  Trusco Part No.  501-5022  Opening Width W x Depth D x Height H (mm)  900×25×450  Material  Steel 
    from S$189.90
    Min. 2 days
  8. Plier hook for punching panel
    Sakae Plier hook for punching panel
    It can be attached to three types of punching panels, louver panels, and FP panels. * 2010 model 22.5 pitch (old type 19.5 pitch hook etc. cannot be installed)
    Mounting Screw Spacing (mm)  (Punching panel) 22.5, (Louvre panel) 45  Allowable Load (kg)  Length (mm)  50  External Dimensions (W x D x H) (mm)  60×50×53  RoHS directive (corresponding to 10 substances)  Correspondence  Suitable Model  Panel sharing  Included Accessories  With 2 retaining screws 
    from S$28.99
    Min. 2 days
  9. Wide hook for panel
    Sakae Wide hook for panel
    It can be attached to three types of punching panels, louver panels, and FP panels. * 2010 model 22.5 pitch (old type 19.5 pitch hook etc. cannot be installed)
    Mounting Screw Spacing (mm)  (Punching panel) 22.5, (Louvre panel) 45  Allowable Load (kg)  Length (mm)  50  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$22.99
    Min. 2 days
  10. Hexagon stick hook for panelina
    TRUSCO Hexagon stick hook for panelina
    This is an option for punching panels and panelinas. Loss and damage of hex wrenches can be managed. Storage of hex wrench
    Maximum Loading Capacity (kg)  Length (mm)  16.9  Mass (g)  180  Width (mm)  184.5  Trusco Part No.  414-3621  Height (mm)  64.5  Number of Holders  Nine 
    from S$29.99
    Min. 2 days
  11. Hook for punching panel
    Sakae Hook for punching panel
    Can be attached to the punching panel. A cap is attached to the tip of the hook for safety. * 2010 model 22.5 pitch (old type 19.5 pitch hook etc. cannot be installed)
    from S$10.99
    Min. 2 days
  12. Spanner hook for punching rack
    TRUSCO Spanner hook for punching rack
    Opening Width W x Depth D x Height H (mm)  174×137×76.6  Uniform Load (kg)  Mass (g)  350  Trusco Part No.  501-5090 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  13. Light Punching Panel Panelina Single-sided Type with Casters
    TRUSCO Light Punching Panel Panelina Single-sided Type with Casters
    Ideal for tool management near the wall, you can grasp the management status of tools at a glance. It is a perforated panel rack that can be used for multiple purposes. Conventional hooks can also be used. Tool classification.
    Square Holes (mm)  10  Maximum Loading Capacity (kg)  20 cars  Uniform Load (kg)  20.0 / piece  Pillar Diameter (Φmm)  25.4  Trusco Part No.  363-9479  Opening Width W x Depth D x Height H (mm)  485×410×1600  Included Accessories  6 hooks (L / S) each  Mass (kg)  7.9  Specification  Assembling type  Board Dimensions (width W x height H) (mm)  Punching board 485 × 890  Type  Single-sided type with casters 
    Rating:
    60%
    from S$259.90
    Min. 2 days
  14. Tape hook for punching rack
    TRUSCO Tape hook for punching rack
    Hook  1 piece  Mass (g)  100  Uniform Load (kg)  Maximum Loading Capacity (kg)  2 (per pc)  Trusco Part No.  501-5049  Opening Width W x Depth D x Height H (mm)  74×135×51.6  Material / Finish  Steel (Unichrome plating finish) 
    from S$14.99
    Min. 2 days
  15. Screwdriver hook for punching panel (small)
    Sakae Screwdriver hook for punching panel (small)
    Can be attached to the punching panel. A cap is attached to the tip of the hook for safety. * 2010 model 22.5 pitch (old type 19.5 pitch hook etc. cannot be installed)
    Mounting Screw Spacing (mm)  22.5  Allowable Load (kg)  RoHS directive (corresponding to 10 substances)  Correspondence  Dimension (mm)  W240×D30  Included Accessories  With 2 retaining screws 
    from S$29.99
    Min. 2 days
  16. Hook bar for punching panel (straight type)
    TRUSCO Hook bar for punching panel (straight type)
    Hook diameter (mm) 
    from S$12.99
    Min. 2 days
  17. Light punching panel Panerina
    TRUSCO Light punching panel Panerina
    Uniform Load (kg)  10  Maximum loading capacity (kg / unit)  10  Mass (kg)  2.9  Pillar Diameter (Φmm)  25.4  Opening Width (mm)  410  Trusco Part No.  440-8845  Height (mm)  443  Length (mm)  91 
    from S$119.90
    Min. 2 days
  18. Pen hook for punching panel (large)
    Sakae Pen hook for punching panel (large)
    Can be attached to the punching panel. A cap is attached to the tip of the hook for safety. * 2010 model 22.5 pitch (old type 19.5 pitch hook etc. cannot be installed)
    Mounting Screw Spacing (mm)  22.5  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$23.99
    Min. 2 days
  19. Punching panel hook
    Sakae Punching panel hook
    RoHS directive (corresponding to 10 substances)  Correspondence  Material  Resin 
    from S$4.69
    Min. 2 days
  20. Panerina option tool tray
    TRUSCO Panerina option tool tray
    Trusco Part No.  116-4122  Length (mm)  127.8  Width (mm)  276.4  Height (mm)  45  maximum load (kg/unit)  Mass (g)  830  Material  Steel 
    from S$44.99
    Min. 2 days
  21. Double hook for punching panel (small)
    Sakae Double hook for punching panel (small)
    Double hook for punching panel (small) * 2010 model 22.5 pitch (old type 19.5 pitch hook etc. cannot be installed)
    Mounting Screw Spacing (mm)  22.5  Length (mm)  50  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$22.99
    Min. 2 days
  22. Hook Bar for Custom Rolling Cart
    TRUSCO Hook Bar for Custom Rolling Cart
    Allowable Load (kg)  Hook diameter (mm) 
    from S$13.99
    Min. 2 days
  23. Electric drill hook for punching rack
    TRUSCO Electric drill hook for punching rack
    Attached to a punching panel, it is ideal for organizing tools such as electric drills. It is effective to attach it to a parts management rack with a punching panel or a tool wagon. If you hang the hook on the panel and tighten the attached screw, the hook will be fixed and will prevent it from ... Read More
    Allowable Load (kg)  Material / Finish  Steel (Unichrome plating finish) 
    from S$14.99
    Min. 2 days
  24. Spray can hook for punching panel
    TRUSCO Spray can hook for punching panel
    Trusco Part No.  336-2914  Dimensions, Width W x Depth D x Height H (mm)  449×89×58  Mass (g)  785  Maximum Loading Capacity (kg)  Nine  Material / Finish  Steel (Unichrome plating finish) 
    from S$55.99
    Min. 2 days
  25. Panel hook
    Sakae Panel hook
    RoHS directive (corresponding to 10 substances)  Correspondence  Included Accessories  With one retaining screw 
    from S$10.99
    Min. 2 days
  26. Panerina Sanderhook
    TRUSCO Panerina Sanderhook
    This is an option for punching panels and panelinas. Loss or damage to the disc grinder can be managed. Storing a disc grinder
    Number of Holders  1 piece  Width (mm)  124  Maximum Loading Capacity (kg)  Mass (g)  320  Trusco Part No.  414-3655  Length (mm)  45  Height (mm)  65.2  Specification  Φ100mm disc grinder can be attached 
    from S$25.99
    Min. 2 days
  27. Crank hook for punching panel
    TRUSCO Crank hook for punching panel
    Hook diameter (mm) 
    from S$12.99
    Min. 2 days
  28. Small shark magnet ring hook
    TRUSCO Small shark magnet ring hook
    Since it is a magnet type, it can be easily attached without drilling a hole. Since the ring part is coated, the tool will not be damaged. Organizing and managing tools
    Attracting Force (N)  49  Height (mm)  51 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  29. S hook for net hook
    TRUSCO S hook for net hook
    Maximum Loading Capacity (kg)  Mass (g)  16  Trusco Part No.  501-4867  Material / Finish  Steel / chrome plating finish  Hook Dimension (mm)  Φ4×86×40 
    Rating:
    80%
    from S$1.49
    Min. 2 days
  30. Driver hook for punching rack
    TRUSCO Driver hook for punching rack
    Uniform Load (kg)  Mass (g)  400  Opening Width W x Depth D x Height H (mm)  449×30×51.6(57)  Trusco Part No.  501-5111 
    from S$48.99
    Min. 2 days
  31. Hook bar for punching panel (tilt type)
    TRUSCO Hook bar for punching panel (tilt type)
    Hook diameter (mm) 
    from S$12.99
    Min. 2 days
  32. Punching panel rack (Panelina)
    TRUSCO Punching panel rack (Panelina)
    Ideal for tool management near the wall, you can grasp the management status of tools at a glance. It is a perforated panel rack that can be used for multiple purposes. Conventional hooks can also be used. Classification of tools, organization and management of tools
    Maximum loading capacity (kg / unit)  120  Included Accessories  Hook L / S 6 each  Specification  No drawer 
    from S$659.90
    Min. 2 days
  33. Resin hook for punching panel
    TRUSCO Resin hook for punching panel
    All-resin punching panel hook. UPR type punching panel rack for panelina *It may be difficult to put on and take off because the play is reduced to suppress wobble. In that case, lightly tap the part other than the claws with a wooden hammer to remove it.
    maximum load (kg/unit)  1.5  Width (mm)  20  Material  Nylon 
    from S$4.79
    Min. 2 days
  34. 5 mesh panel hooks
    IRIS OHYAMA 5 mesh panel hooks
    5 hooks for mesh panels. Convenient for hanging keys, small items, or cooking utensils such as ladles and spatula in the kitchen.
    Allowable Load (kg)  Dimensions, Width W x Depth D x Height H (mm)  224×60×41  Mass (g)  72  Color  Beige 
    Rating:
    60%
    from S$5.29
    Min. 2 days
  35. Spanner hook for panel
    Sakae Spanner hook for panel
    It can be attached to three types of punching panels, louver panels, and FP panels. *2010 model 22.5 pitch (Old type 19.5 pitch hooks cannot be installed) *The mounting part is a resin base.
    Mounting Screw Spacing (mm)  (Punching panel) 22.5, (Louvre panel) 45  RoHS directive (corresponding to 10 substances)  Correspondence  Included Accessories  With 2 retaining screws 
    from S$35.99
    Min. 2 days
  36. Panerina hose hook
    TRUSCO Panerina hose hook
    Option for punching panels and panelinas. Hose, tape, and disk grinder can be managed in case of loss or damage. Storage of hoses, tapes, and disc grinder grindstones
    Hook  1 piece  Maximum Loading Capacity (kg)  Height (mm)  59  Width (mm)  59.5 
    from S$19.99
    Min. 2 days
  37. Small shark magnetic punching panel
    TRUSCO Small shark magnetic punching panel
    It can be easily attached to metal surfaces such as machine sides and iron poles without drilling holes. It is suitable for managing various tools by attaching a panelina option or a remora P-type hook. Organizing and managing tools
    Mass (kg)  1.8  Square Holes (mm)  10 (17 rows x 17 rows)  Attracting Force (N)  196  Length (mm)  21  Opening Width (mm)  460  Height (mm)  460  Maximum Loading Capacity (kg)  Trusco Part No.  765-7838 
    from S$179.90
    Min. 2 days
  38. Ring hook for punching rack
    TRUSCO Ring hook for punching rack
    Mass (g)  150  Uniform Load (kg)  Trusco Part No.  501-5103  Opening Width W x Depth D x Height H (mm)  74×164×51.6(72) 
    from S$19.99
    Min. 2 days
  39. Hook (large)
    Sakae Hook (large)
    It can be attached to three types of punching panels, louver panels, and FP panels. * 2010 model 22.5 pitch (old type 19.5 pitch hook etc. cannot be installed)
    Mounting Screw Spacing (mm)  (Punching panel) 22.5, (Louvre panel) 45  Length (mm)  100  Allowable Load (kg)  RoHS directive (corresponding to 10 substances)  Correspondence  Included Accessories  With 2 retaining screws 
    from S$12.99
    Min. 2 days
  40. Stainless hook
    Sakae Stainless hook
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$14.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 105

Set Ascending Direction