Workbenches
A sense of stability is most important for the workbench used at the logistics site. The top plate is often used from off-white to light gray or beige to facilitate inspection of the product. In order to pack storage goods, light items that can be easily assembled so that they can be loaded and installed in a short time are useful. In the case of a folding workbench, in addition to the general type, the safety is better than the one with a stopper to prevent the center of the table from folding or the one with a safety ring installed to prevent the legs from bending. Some are even higher.
Other Related Pages
MonotaRO Lightweight workbenchFoldable for convenient storage. as a workbench. * Do not use for purposes other than the original purpose. *Please do not step on this product. *Please do not place heavy objects that exceed the load capacity.Uniform Load Capacity (kg) 100 Top Plate Thickness (mm) 30 Type Folding type- DIY-ID Zinc black saw hose bracketA sawhorse bracket was originally a metal fitting used to create a workbench for cutting wood with a saw. You can easily complete a workbench by preparing 2 x 4 materials, assembling and screwing. You can easily make a low table or desk depending on how it is assembled, as well as a workbench, wh... Read MoreFinish Black paint finish Material Iron
- DIY-ID Saw hose recapAfter completing the Sohorse, just put it on like a sock to protect the floor. It also becomes less slippery. The material is an elastomer and uses a material that does not easily transfer color to the floor. The leg caps for hoses have a scalloped inner surface to accommodate the different thick... Read MoreColor Black RoHS directive (corresponding to 10 substances) Correspondence Material Elastomer
- MonotaRO Work table Simple type WoodenFoldable legs for convenient storage. Suitable for a wide range of light work from woodworking. As a light workbench for various work from woodwork * When working, place the workbench on a flat surface and maintain a comfortable posture. Also, wear protective gear and goggles. It is very dangerou... Read MoreMass (kg) 16.5 Top Plate Thickness (mm) 18 Opening Width (mm) 1800 Storage Dimensions (width W x depth D x height H) (mm) 1800×670×62 Length (mm) 670 Height (mm) 770 Uniform Load Capacity (kg) 80 (with uniform load) Material Veneer board (surface varnish coating)
- NIPPON POP RIVETS AND FASTENERS Saw hose (1 set)Low center of gravity and high load capacity due to surface support. Comes with a cable clamp that makes work smoother. Lightweight.Length (mm) 50 Mass (kg) 6.2 Opening Width (mm) 690 Height (mm) 810 Trusco Part No. 820-4924 Specification Two-by-clamp is possible Material plastic
- TRUSCO Turntable (Rubber Mat Tension Top Plate)Ideal for assembly of products, parts, etc., and maintenance of molds. It can be easily moved to a convenient position for the operator. * We do not deliver to private homes (detached houses / apartments).Height (mm) 33 Specification Manual
- Osaka Taiyu Pallet Rotating Machine MawaruIt is most often used for efficient loading at palletizing sites. Especially in a narrow place, the worker does not have to move and can always work in front. In addition, Mawar is also effective in improving work efficiency when wrapping stretch films after loading. It is a low cost type. Loadin... Read MoreHeight (mm) 55 Material Iron
- TRUSCO Turntable (Steel Top Plate)Ideal for assembly of products, parts, etc., and maintenance of molds. It can be easily moved to a convenient position for the operator. * We do not deliver to private homes (detached houses / apartments).Height (mm) 30 Material (Inside) Plastic bearing Material (Main Unit) Steel (silver paint) Material (Top Plate) Steel top plate
- SPACIO 20 sets of hook bolts (for roof) JB-303It is used when hooking a pipe to the corrugated sheet of the roof. Used when hooking a pipe to the corrugated sheet of the roofTrusco Part No. 108-2194 Mass (g) 12.7 Specification Pipe fixing bracket Material Steel (trivalent chromate treatment)from S$14.99Min. 2 days
- Osaka Taiyu Mawaru MiniA small Mawar mini that is thin and can withstand heavy loads. For taking out work of wire cut to size. For rotating workbenches for welding. For rotating work pallets on conveyors.Height (mm) 21
- TRUSCO Non-slip sheet for work tableA special film that suppresses slipping is pasted on one side (workbench side) of the plastic cardboard. For protecting products on the workbench and preventing scratches on the workbench surface.Mass (kg) 1.3 Opening Width (mm) 1800 Thickness (mm) 5 Length (mm) 900 Material Plastic cardboard
- TRUSCO Work support standIt is a work support table that can be used from sitting to standing work with height adjustment and top plate tilt function. Assembly formula. Auxiliary table for placing small parts such as processing and assembly work. As a side table in factories and offices. * We do not deliver to private ho... Read MoreTime to Assemble (Estimated) 30 minutes per person Mass (kg) 13 Height adjustment 30mm pitch Length (mm) 400 Uniform Load Capacity (kg) 50 Opening Width (mm) 500 Material (Top Plate) Steel Material Steel Color Young greenfrom S$289.90Min. 2 days
- SPACIO Insert nut JB-406This is an insert nut attached to the end of a pipe. For M16. Insert nut attached to pipe endTrusco Part No. 108-2186 Diameter (Φmm) 24 Mass (g) 74 Size M16 Material Steel (trivalent chromate treatment)
- SPACIO Inner rubber cap JB-402An inner rubber cap attached to the end of a pipe. Adjuster attached to pipe endTrusco Part No. 108-0931 Mass (g) 16 Specification For pipe end mounting Material Rubber
- Sakae Replacement caster setCaster 75Φ rubber car RoHS directive (corresponding to 10 substances) Correspondencefrom S$78.99Min. 2 days
- TRUSCO TurntableDespite its small size, it has the ability to withstand a load of 500 kg, and can be used not only in factories but also in stores and offices.Height (mm) 20.5 Trusco Part No. 287-4172 Mass (kg) 3.2 Inner Diameter (Φmm) 360 Outer Diameter (Φmm) 450 Uniform Load (kg) 500
-
- TRUSCO Auxiliary tableUniform Load Capacity (kg) 100 Length (mm) 500 Opening Width (mm) 500 Trusco Part No. 500-8395 Height (mm) 600 Mass (kg) 8.5 Specification Adjuster specifications
- SPACIO Caster plate A (8. 5mm pitch) JB-005Caster plate for attaching casters to pipes. for mounting casters * M8X35 bolts are required separatelyTrusco Part No. 108-1619 Mass (g) 109 Specification Caster plate A-82-28 Material Steel (trivalent chromate treatment)
- MonotaRO Stand on castersAs an auxiliary work table * Do not use for any other purpose.Caster Type 2 with free stopper, 2 without stopper Uniform Load Capacity (kg) 20 Height (mm) 970～1430 Color Red Material Steel Dimensions (Width W x Depth D) (mm) [Top plate] 505 x 295from S$169.90Min. 2 days
- Sakae Work bench Option mat (Revised RoHS Directive 10 types of restricted substances)This mat is compatible with 10 restricted substances in the revised RoHS Directive (RoHS2). In addition to the conventional 6 restricted substances, it also supports 4 types of restricted phthalate esters. Please choose according to the application. As an optional workbench mat for working at ele... Read MoreThickness (mm) 2 Length (mm) 600 Opening Width (mm) 900 Opening Width W x Depth D (mm) 900×600 RoHS directive (corresponding to 10 substances) Correspondence Color Green Material Vinyl chloride
- stax tools Isaac saw hoseThe frame can withstand a weight of 590 kg and is resistant to rust, and by extending the legs, it can be adjusted in 8 steps from 660 to 820 mm. Furthermore, it can also be used as a workbench by installing two-by materials on the left and right. It is convenient to carry because it is lightweig... Read MoreMass (kg) 8.5 (per leg)
- Sakae Resin adjusterOuter dimensions (W x H) (mm) 40Φ×57 Material ABS resin Act on Promoting Green Procurement Conformity RoHS directive (corresponding to 10 substances) Correspondencefrom S$5.59Min. 2 days
- Iguchi Kiko ISB rotating ring IRH-400Rotating ring Simple workbench, Chinese tableMass (kg) 1.2 Height (mm) 11.8 Inner Diameter (Φmm) 338 Uniform Load (kg) 40 Outer Diameter (Φmm) 401 Trusco Part No. 868-7743 Material (ring) Aluminum Specification For upward
- SPACIO Mounting bracket A JB-106Fitting fittings used for opening and closing trolleys, etc. Fitting bracketTrusco Part No. 108-2128 Mass (g) 66 Specification Pipe mounting bracket Material Steel (trivalent chromate treatment)from S$8.99Min. 2 days
- TRUSCO Suction punch mat for work benchSince the back of the mat is adsorbed, it does not move and protects the top plate from scratches. Adsorption is restored by washing. As a protective mat for workbenches, shelves, etc. *Please note that the mat will become very slippery if dirt, wax, or moisture adheres to the suction part on the... Read MoreThickness (mm) 3 Opening Width (mm) 900 Color Grayfrom S$33.99Min. 2 days
- SPACIO Name holder JB-612It is a holder attached to a pipe to display. It is a holder attached to a pipe to display.Trusco Part No. 108-1580 Inner Diameter (Φmm) 30 Mass (g) 41 Dimensions, Width W x Length L (mm) 50×210 Material Transparent polyester resinfrom S$9.99Min. 2 days
- SPACIO Caster plate B (81.5mm pitch) JB-006Caster plate for attaching casters to pipes. for mounting casters * M8X35 bolts are required separatelyTrusco Part No. 108-0943 Mass (g) 89 Specification Caster plate B-82-28 Material Steel (trivalent chromate treatment)from S$3.19Min. 2 days
-
- TRUSCO TurntableBy adopting bearings, it rotates smoothly. Comes with a stopper that can be stopped at any position. It is ideal for assembly work of parts and products, and maintenance work such as molds. You can work from any angle of 360°, improving work efficiency.Base Thickness (mm) 2.3 Table Thickness (mm) 2.3 Height (mm) 28 Material Steel (powder coating)from S$389.90Min. 2 days
- Sakae Snap stop (for frontage)Prevents tools, parts, small items, etc., from falling from the top plate.RoHS directive (corresponding to 10 substances) Correspondence Color Ivoryfrom S$79.99Min. 5 days
- Osaka Taiyu Mounting washer for Mawar PT typeParts for Mawar PT Model Useful for attaching iron plates, plywood, conveyors, trolleys, and lifters.Mass (g) 100 Width (mm) 38 Length (mm) 50 Trusco Part No. 795-7726 Thickness (mm) 9from S$26.99Min. 2 days
- HOZAN (HOZAN TOOL INDUSTRIAL) Mobile workbenchMass (kg) 14.5 Length (mm) 500 Uniform Load Capacity (kg) 60 (at rest) Height (mm) 630 Caster Diameter (Φmm) 65 Opening Width (mm) 700 Color (leg) Silver Color (Body) Silver Dimension (mm) Small table / 180 × 150 (withdrawal)from S$489.90Min. 5 days
- TRUSCO Small shark P-type magnet base with punching holesAn attachment for attaching a P-type remora to a punching panel. Small items can be organized by hanging a light bin. Since it is a magnet type, it is ideal for hanging a bin rack that can be easily attached without drilling holes and managing small items. KBZ-PDF/PDRF/PNF/PSPF and TUR-6K can be ... Read MoreLength (mm) 12 Maximum Loading Capacity (kg) 2.5 / piece Opening Width (mm) 216.2 Attracting Force (N) 34.3×2 Mass (g) 360 Trusco Part No. 491-1032 Height (mm) 81 Suitable for KBZ-PDF / PDRF / PNF / PSPF can be set Material Steel, ferrite magnet, natural rubberfrom S$45.99Min. 2 days
- SPACIO 20 sets of hook bolts (for side) JB-304It is used (for the side) when hooking a pipe on a corrugated plate. Used when hooking a pipe on a corrugated plate (for the side)Trusco Part No. 108-0897 Mass (g) 12.4 Specification Pipe fixing bracket Material Steel (trivalent chromate treatment)
- Watanabe Pet mat loopThe micro suction cup makes it easy to absorb, and it won't suck up even when vacuumed. Only dirty areas can be washed. It also has the effect of reducing footsteps and deodorizing. It can be cut freely with scissors or a cutter. Please use it on smooth floors like wooden floors. *If you leav... Read MoreLength (mm) 305 Thickness (mm) 4 Mass (g) 450 Material Front polyester, back acrylic resinfrom S$149.90Min. 6 days
- SPACIO Resin rail L type JB-602 Length: 2MA resin rail for receiving parts and guiding parts. Resin rails for receiving parts and guiding partsTrusco Part No. 108-2165 Length (mm) 2000 Mass (g) 310 Color Gray Material PVC resinfrom S$14.99Min. 12 days
- SPACIO Key bracket C JB-103Key metal fittings used for opening and closing trolleys, etc. as a hookTrusco Part No. 108-2178 Mass (g) 49 Specification Pipe mounting bracket Material Steel (trivalent chromate treatment)from S$8.99Min. 2 days
- SPACIO Key bracket B JB-102Key metal fittings used for opening and closing trolleys, etc. as a hookTrusco Part No. 108-0951 Mass (g) 125 Specification Pipe mounting bracket Material Steel (trivalent chromate treatment)from S$8.99Min. 2 days
- TRUSCO Auxiliary table (with casters)Uniform Load Capacity (kg) 50 (when using casters) Length (mm) 500 Opening Width (mm) 500 Trusco Part No. 500-8409 Height (mm) 640 Mass (kg) 8.7 Type With casters Specification Φ42mm twin wheel caster specificationfrom S$389.90Min. 2 days
