All Category

Chore Chains

View : Grid List
Filter

Items 1 - 40 of 321

Set Ascending Direction
  1. Aluminum color chain Lemon yellow 30m Wire diameter 3mm
    Mizumoto Machine Mfg. Aluminum color chain Lemon yellow 30m Wire diameter 3mm
    It weighs about 1/3 that of iron and stainless steel, and is about 10 times stronger than plastic chains. For interior (lobby, etc.) and outdoor (exterior, etc.) decoration, partitions, etc.
    Working load (kN)  0.25  Mass (kg)  Inner length P (mm)  24  Wire diameter d (Φmm)  3.0  Overall Length (m)  30  Inner width W (mm)  5.0  Trusco Part No.  849-0260  Material / Finish  Aluminum light alloy / anodized finish 
    from S$329.90
    Min. 3 days
  2. Aluminum color chain Red 30m Wire diameter 6mm
    Mizumoto Machine Mfg. Aluminum color chain Red 30m Wire diameter 6mm
    It weighs about 1/3 that of iron and stainless steel, and is about 10 times stronger than plastic chains. For interior (lobby, etc.) and outdoor (exterior, etc.) decoration, partitions, etc.
    Working load (kN)  1.76  Inner width W (mm)  10.0  Overall Length (m)  30  Inner length P (mm)  36  Wire diameter d (Φmm)  6.0  Mass (kg)  Trusco Part No.  849-0288  Material / Finish  Aluminum light alloy / anodized finish 
    from S$599.90
    Min. 3 days
  3. CHore Chain Stainless Cut Type
    MonotaRO CHore Chain Stainless Cut Type
    * Never hang an object with this chain.
    Material  Stainless steel (SUS304) 
    Rating:
    95%
    from S$7.69
    Min. 2 days
  4. Chore chain steel
    MonotaRO Chore chain steel
    The seams are welded. * Never hang an object with this chain.
    Chain Length (m)  30  Surface Treatment  Electroplating  Material  Steel 
    Rating:
    86%
    from S$31.99
    Min. 2 days
  5. Multi-purpose Chain Steel Cut Type
    MonotaRO Multi-purpose Chain Steel Cut Type
    * Never hang an object with this chain. * The color of UNIQLO plating may differ depending on the lot, but it does not affect the quality.
    Material  Iron (Q235) 
    Rating:
    93%
    from S$3.19
    Min. 2 days
  6. Cut Chain, Stainless Steel
    TRUSCO Cut Chain, Stainless Steel
    Made of stainless steel, it does not rust easily and has excellent durability. As an entrance / exit or partition for various facilities / equipment such as parking lots, parks, and sidewalks.
    Material  Stainless steel (SUS304) 
    Rating:
    93%
    from S$13.99
    Min. 2 days
  7. General Purpose Chain Stainless Steel Cut Type Length 30m Roll
    MonotaRO General Purpose Chain Stainless Steel Cut Type Length 30m Roll
    * Never hang an object with this chain.
    Overall Length (m)  30  Material  Stainless steel (SUS304) 
    Rating:
    89%
    from S$139.90
    Min. 2 days
  8. Cut Chain, Unichrome Plated Steel
    TRUSCO Cut Chain, Unichrome Plated Steel
    As it is a cut chain, it can be used immediately. Partition / fall prevention
    Material  Steel (SWRM)  Surface Treatment  Unichrome plating finish 
    Rating:
    85%
    from S$5.19
    Min. 2 days
  9. Steel chain (Unichrome plating)
    ESCO Steel chain (Unichrome plating)
    Link chain with a large wire diameter. The strength is the highest. With seam welding For hanging (* However, within the working load range)
    Finish  Chrome, UNIQLO  Material  Iron (SWRM6) 
    Rating:
    96%
    from S$12.99
    Min. 2 days
  10. Beware Chain
    Nissa Chain Beware Chain
    Rings are attached to both ends of a chain with a wire diameter of 4.8 mm. For locking the gate of the construction site and preventing theft when used in combination with a key.
    Wire Diameter Φ(mm)  4.8  Material  Steel (SWRM)  Surface Treatment  Unichrome plating finish 
    Rating:
    84%
    from S$7.19
    Min. 2 days
  11. Stainless Cut Chain
    Mizumoto Machine Mfg. Stainless Cut Chain
    SUS304. Hard to rust. strong.
    Rating:
    83%
    from S$29.99
    Min. 2 days
  12. Link chain
    Nissa Chain Link chain
    Since it is a broken chain, it can be used immediately. Can be used for various scenes such as partitions. * Reference working load and breaking load are not guaranteed values. There are some tolerances for standard dimensions. * Please do not use for hanging
    from S$5.59
    Min. 2 days
  13. Stainless steel cut mantel with key ring
    Himejiya Stainless steel cut mantel with key ring
    There are rings on both ends, and it can be used for various purposes. Can be combined with a carabiner or eye snap. Made of stainless steel, it has excellent rust resistance and weather resistance, and is durable and long-lasting. Ideal for outdoor and beach use!
    Overall Length (mm)  About 600 
    Rating:
    100%
    from S$7.99
    Min. 2 days
  14. Screw terminal
    Nissa Chain Screw terminal
    It can be sandwiched between chains and easily screwed.
    Material  Stainless steel (SUS304) 
    Rating:
    87%
    from S$6.99
    Min. 2 days
  15. Chain joint made of stainless steel
    Mizumoto Machine Mfg. Chain joint made of stainless steel
    You can also hit it with a hammer to prevent it from coming off.
    Material  Stainless steel (SUS304) 
    Rating:
    80%
    from S$3.29
    Min. 2 days
  16. Link chain unwelded type
    Nissa Chain Link chain unwelded type
    It is an inexpensive and versatile chain because it is not welded. For connecting parts and hanging.
    Overall Length (m)  30  Material  Steel (SWRM)  Surface Treatment  Unichrome plating finish 
    Rating:
    92%
    from S$44.99
    Min. 2 days
  17. SUS304 Stainless steel mantel chain
    Mizumoto Machine Mfg. SUS304 Stainless steel mantel chain
    Unlike a normal ring-shaped chain, it has a decorative shape with a twist.
    Rating:
    100%
    from S$9.89
    Min. 2 days
  18. Cut Chain, Stainless Steel
    TRUSCO Cut Chain, Stainless Steel
    Made of stainless steel, it does not rust easily and has excellent durability.
    Material  Stainless steel (SUS304) 
    Rating:
    100%
    from S$9.59
    Min. 2 days
  19. Chores chain
    Taiyo Seiki Iron Works Chores chain
    * It is not suitable for hanging tools because it is used for upset welding.
    Chain Length (m)  30  RoHS directive (corresponding to 10 substances)  Correspondence  Surface Treatment  Denki plating  Material  Iron 
    Rating:
    100%
    from S$79.99
    Min. 2 days
  20. Stainless steel pocket chain MP type 300mm in total length
    Mizumoto Machine Mfg. Stainless steel pocket chain MP type 300mm in total length
    Working Load, Reference (kN)  0.01  Dimension D (mm)  1.2  Dimension A (mm)  1.2  Dimension B (mm)  14  Dimension L (mm)  300  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$8.99
    Min. 2 days
  21. Stainless steel safety mini chain Chain length 600mm
    Mizumoto Machine Mfg. Stainless steel safety mini chain Chain length 600mm
    Elliptical links are used on both ends, and the object is firmly guarded by passing it once. For preventing ladders from tipping over, preventing theft of bicycles and motorcycles, and locking gates
    Dimension L (mm)  600 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  22. Aluminum color chain
    Mizumoto Machine Mfg. Aluminum color chain
    Rating:
    90%
    from S$38.99
    Min. 12 days
  23. SUS304 Stainless chain without welding
    Mizumoto Machine Mfg. SUS304 Stainless chain without welding
    Due to its excellent corrosion resistance and oxidation resistance, it is widely used.
    Rating:
    100%
    from S$3.19
    Min. 2 days
  24. Screw terminal
    Nissa Chain Screw terminal
    After passing through the chain, fasten it to the wall with screws. * The reference working load of the screw terminal varies depending on the strength of the mounting location such as the ceiling or wall.
    RoHS directive (corresponding to 10 substances)  Correspondence  Surface Treatment  Polishing  Material  Stainless steel SUS304 
    from S$2.59
    Min. 2 days
  25. Stainless tube protection chain
    Mizumoto Machine Mfg. Stainless tube protection chain
    from S$9.69
    Min. 32 days
  26. Link chain Iron UNIQLO welding
    Nissa Chain Link chain Iron UNIQLO welding
    Welded in a basic shape, it is inexpensive and has stable strength.
    Overall Length (m)  30 
    from S$98.99
    Min. 2 days
  27. Stainless steel safety mini chain Chain length 600mm
    Mizumoto Machine Mfg. Stainless steel safety mini chain Chain length 600mm
    Elliptical links are used on both ends, and the object is firmly guarded by passing it once. For preventing ladders from tipping over, preventing theft of bicycles and motorcycles, and locking gates
    Dimension L (mm)  600 
    from S$11.99
    Min. 2 days
  28. Strong aluminum chain
    Mizumoto Machine Mfg. Strong aluminum chain
    Rating:
    80%
    from S$29.99
    Min. 6 days
  29. Cut Chain, Welded, Unichrome Plated Steel
    TRUSCO Cut Chain, Welded, Unichrome Plated Steel
    Since it is a broken chain, it can be used immediately. Partition / fall prevention, partition / fall prevention
    from S$9.69
    Min. 2 days
  30. Ball caster (outer diameter Φ22)
    TAKIGEN MFG Ball caster (outer diameter Φ22)
    Small size and smooth rotation Conveyor, packing workbench, turntable
    TAKIGEN code  30097  Material (Case)  Steel Plate Cold Commercial (SPCC)  Material (Ball)  Steel balls for ball bearings 
    Rating:
    100%
    from S$1.79
    Min. 2 days
  31. Stainless chain
    TAKIGEN MFG Stainless chain
    Material  Stainless steel wire rod (SUS304) 
    from S$7.99
    Min. 2 days
  32. Stainless chain
    Mizumoto Machine Mfg. Stainless chain
    Due to its excellent corrosion resistance and oxidation resistance, it is widely used.
    Overall Length (m)  30 
    from S$299.90
    Min. 2 days
  33. Stainless cut chain
    Safe-Run Safety Supplies Stainless cut chain
    A versatile stainless steel chore chain. Made of SUS304 stainless steel with excellent corrosion resistance. It has excellent heat resistance, corrosion resistance, and durability and can be widely used. Chore chain * Never hang an object with this chain. Please refrain from using it for any othe... Read More
    Material  SUS304 stainless steel 
    from S$38.99
    Min. 5 days
  34. Iron Uniqlo Link C type  3.0mmX30M
    Nissa Chain Iron Uniqlo Link C type 3.0mmX30M
    An inexpensive and popular chain, which is unwelded, so the chain can be directly attached as a metal tip. For connecting parts and hanging
    Working load (kN)  0.14  Wire diameter d (Φmm)  3.0  Overall Length (m)  30  Inner length P (mm)  32.5  Mass (kg)  4.26  Trusco Part No.  756-1270  Inner width W (mm)  9.0  Material / Finish  Iron (SWRM) / Unichrome plating 
    from S$55.99
    Min. 2 days
  35. Cut Chain, with Protection Tube, Stainless Steel
    TRUSCO Cut Chain, with Protection Tube, Stainless Steel
    Since it is protected by a tube, the object in contact with the chain is not easily scratched. Since the impact noise and friction noise are smaller than those of a normal chain, it is suitable when you are concerned about noise. Helps prevent accidents caused by finger pinching.
    Rating:
    100%
    from S$12.99
    Min. 2 days
  36. Iron UNIQLOLINK C type 1. 4mmX30M
    Nissa Chain Iron UNIQLOLINK C type 1. 4mmX30M
    An inexpensive and popular chain, which is unwelded, so the chain can be directly attached as a metal tip. For connecting parts and hanging
    Working load (kN)  0.04  Mass (kg)  1.02  Wire diameter d (Φmm)  1.4  Inner length P (mm)  14.5  Overall Length (m)  30  Inner width W (mm)  4.4  Trusco Part No.  756-1253  Material / Finish  Iron (SWRM) / Unichrome plating 
    Rating:
    100%
    from S$26.99
    Min. 2 days
  37. Stainless Steel Safety Mini Chain Chain length 900mm
    Mizumoto Machine Mfg. Stainless Steel Safety Mini Chain Chain length 900mm
    Elliptical links are used on both ends, and the object is firmly guarded by passing it once. For preventing ladders from tipping over, preventing theft of bicycles and motorcycles, and locking gates
    Working load (kN)  1.67  Dimension W1 (mm)  16  Dimension L2 (mm)  26  Mass (g)  277  Dimension L1 (mm)  28  Dimension D2 (mm)  Dimension D1 (mm)  Dimension W2 (mm)  6.5  Trusco Part No.  849-0357  Dimension L (mm)  900 
    from S$26.99
    Min. 2 days
  38. Bronze chain
    FUJIWARA (AIOULE) Bronze chain
    from S$95.99
    Min. 4 days
  39. Heavy link chain
    Nissa Chain Heavy link chain
    It is a rust-resistant material and is used in a very wide range. Can be used for various scenes such as partitions. * Reference working load and breaking load are not guaranteed values. There are some tolerances for standard dimensions.
    RoHS directive (corresponding to 10 substances)  Correspondence  Surface Treatment  Polishing  Material  SUS304 
    from S$299.90
    Min. 4 days
  40. Fluorescent safety spiral (fluorescent safety sign)
    Daido Hant Fluorescent safety spiral (fluorescent safety sign)
    To ensure safety by wrapping around chains, ropes, pipes, etc. * Tighten the holes at both ends with the attached cable tie, and cut off the remainder. * Please note that there is a risk of injury at the cut part.
    Length B (mm)  160  Thickness (mm)  Length A (mm)  240  Width (mm)  30  Length C (mm)  40 
    from S$6.59
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 321

Set Ascending Direction