All Category

Stainless Utility Carts

View : Grid List
Filter

Items 1 - 40 of 61

Set Ascending Direction
  1. Conductive Tray with Partitions
    AS ONE Conductive Tray with Partitions
    * The partition plate cannot be removed.
    Surface Resistance (Ω)  103~104  Material  Conductive PP (polypropylene) 
    Rating:
    88%
    from S$12.99
    Min. 2 days
  2. Stainless Steel Wagon
    AS ONE Stainless Steel Wagon
    Load Capacity (kg)  20  Outer Dimensions, Width W x Depth D x Height H (mm)  460×310×809  Drawer  None  Material  Stainless steel (SUS430) 
    Rating:
    100%
    from S$199.90
    Min. 2 days
  3. SUS304 Rolling Cart
    TRUSCO SUS304 Rolling Cart
    A clean and robust SUS304 welded integrated wagon. For work in places where rust and dirt are disliked. * We do not deliver to private homes (detached houses / apartments).
    Number of Tiers  Pillar Diameter (Φmm)  25  Equal load capacity (kg / stage)  30  Maximum loading capacity (kg / unit)  50  Caster  Free × 4  Drawer  None  Material (Wheel)  Rubber  Material (Main Unit)  Stainless steel (SUS304)  Material (Caster)  Steel  Stopper  Yes (×2) 
    from S$449.90
    Min. 18 days
  4. Conductive Cuttable Partition Plate
    AS ONE Conductive Cuttable Partition Plate
    It can be cut to the required size and used, which is convenient for organizing and sorting small items.
    Groove Width (mm)  Surface Resistance (Ω)  6×103  Material  Conductive PP (polypropylene) 
    from S$32.99
    Min. 2 days
  5. Conductive VN container lid
    TRUSCO Conductive VN container lid
    Being conductive, it is useful for centralized control of electronic components. Can be attached to VN-○NE and stacked for use. They can also be staggered and stacked. For preventing dust from entering.
    Surface Resistance (Ω)  106  Color  Black 
    from S$6.49
    Min. 2 days
  6. Swivel Caster for Antistatic Rolling Cart
    TRUSCO Swivel Caster for Antistatic Rolling Cart
    By using an antistatic urethane car, it is a caster that is hard to be charged with static electricity and is hard to get dust.
    Teeth Spacing  1.75  Nominal Diameter D (mm)  100  Mounting Height H (mm)  126  Dimension (Length)  35  Allowable Load (daN)  60  Stud Thread  M12 
    from S$29.99
    Min. 2 days
  7. 2-Tier Rolling Cart (Made of Stainless Steel)
    ESCO 2-Tier Rolling Cart (Made of Stainless Steel)
    4 free casters (2 of which have stoppers) Assembled type (tool required) The top plate can be assembled into either a dish type or a flat type to prevent falling. The shelf plate can be adjusted in mounting height.
    Load Capacity (kg/Shelf)  20  Number of Tiers  2nd grade  Caster Diameter (Φmm)  40  Working surface dimensions (mm)  447×297  Dimension (mm)  460 × 310 × H809 (including protrusions)  Mass (kg)  5.5  Shelf Spacing (mm)  Approx. 100 mm (height adjustable)  Drawer  None  Material (Wheel)  Rubber  Material  Stainless steel (SUS430) 
    from S$179.90
    Min. 2 days
  8. Swivel Caster for Conductive Rolling Cart
    TRUSCO Swivel Caster for Conductive Rolling Cart
    Made of stainless steel, it has excellent corrosion resistance and water resistance. (Electrolytic polishing finish) By using a conductive rubber wheel, it is easy to release static electricity and it is also excellent in dust adsorption prevention effect.
    Teeth Spacing  1.75  Nominal Diameter D (mm)  100  Mounting Height H (mm)  126  Dimension (Length)  35  Allowable Load (daN)  60  Stud Thread  M12 
    from S$39.99
    Min. 2 days
  9. New Material Wagon
    AS ONE New Material Wagon
    Drawer  None 
    from S$379.90
    Min. 4 days
  10. Stainless Heavy Wagon
    AS ONE Stainless Heavy Wagon
    Drawer  None 
    from S$579.90
    Min. 4 days
  11. 600x450x835mm / 2-Tier Rolling Cart (Made of Stainless Steel)
    ESCO 600x450x835mm / 2-Tier Rolling Cart (Made of Stainless Steel)
    Mass (kg)  10  Load Capacity (kg/Shelf)  15  Number of Tiers  2nd grade  Dimension (mm)  600×450×835(H)  Caster Diameter (Φmm)  75  Esco Part No.  EA956MV-21  Material  Stainless steel (SUS430)  Material (Wheel)  Urethane 
    from S$439.90
    Min. 4 days
  12. Stainless Steel Rolling Cart (SUS430, with Guard) Guard: Upper and Lower
    Shinko Stainless Steel Rolling Cart (SUS430, with Guard) Guard: Upper and Lower
    You can adjust the level difference by adding an additional shelf (SUS430: MB type) sold separately according to the usage situation. Equipped with urethane casters with excellent wear resistance as standard equipment. Wagon 2-stage specification * We do not deliver to private homes (detached hou... Read More
    Mass (kg)  18.2  Number of Tiers  Pillar Diameter (Φmm)  25  Trusco Part No.  459-7737  Equal load capacity (kg / stage)  50  Length (mm)  600  Caster Diameter (Φmm)  75  Maximum loading capacity (kg / unit)  80  Height (mm)  800  Opening Width (mm)  900 
    from S$999.00
    Min. 11 days
  13. Silent Lab Cart Economy
    AS ONE Silent Lab Cart Economy
    As ONE Part Number  1-7633-03  Number of Tiers  Dimension (mm)  600×450×850  Drawer  None 
    from S$589.90
    Min. 4 days
  14. Option for conductive Pradan
    AS ONE Option for conductive Pradan
    As ONE Part Number  1-9124-02  Dimension (mm)  800×210×3  Specification  Partition plate 
    from S$109.90
    Min. 5 days
  15. Stainless Steel Wagon
    AS ONE Stainless Steel Wagon
    Drawer  None 
    from S$289.90
    Min. 4 days
  16. Stainless Steel Machine Wagon Table
    Kashiwa Stainless Kogyo Stainless Steel Machine Wagon Table
    Made of stainless steel * We do not deliver to private homes (detached houses / apartments).
    Number of Tiers  As ONE Part Number  62-2713-81  Drawer  None  Size  S / 2 stage  Type  Stainless Wagon Mechanical Table 
    from S$269.90
    Min. 13 days
  17. Rolling Cart with 3-Way Spill Stopper 3-Tier
    Azuma Rolling Cart with 3-Way Spill Stopper 3-Tier
    * We do not deliver to private homes (detached houses / apartments).
    Mass (kg)  26  Number of Tiers  Trusco Part No.  868-7669  Drawer  None 
    from S$999.00
    Min. 5 days
  18. 450x300x750mm / 5kg Rolling Cart (Stainless Steel)
    ESCO 450x300x750mm / 5kg Rolling Cart (Stainless Steel)
    Number of Tiers  Esco Part No.  EA956MA-1 
    from S$369.90
    Min. 4 days
  19. Stainless Steel Conductive Heavy Wagon Regular NEH Series
    AS ONE Stainless Steel Conductive Heavy Wagon Regular NEH Series
    A stainless wagon with conductive casters as standard equipment (with diagonal stoppers). Heavy measuring instruments can be mounted and transported. The top plate and shelf plate have a fall prevention frame. It has excellent chemical resistance, rust resistance, and durability. Robust design th... Read More
    from S$589.90
    Min. 5 days
  20. Stainless steel electric wagon M11 series
    Shinko Stainless steel electric wagon M11 series
    The top plate has a fall prevention frame.
    Caster Type / Size (mm)  Φ75 (with stopper) steel fittings 
    from S$589.90
    Min. 18 days
  21. Height Adjustment Legs (Ball Type/Stainless Steel)
    ESCO Height Adjustment Legs (Ball Type/Stainless Steel)
    When used in wet kitchens, etc., the floor is often washed with water.
    from S$8.89
    Min. 3 days
  22. Washer (made of nylon resin)
    ESCO Washer (made of nylon resin)
    Replacement washer for body with nylon adjustable feet
    from S$5.89
    Min. 3 days
  23. Instrument Table (Layered Storage Type)
    AS ONE Instrument Table (Layered Storage Type)
    Drawer  None 
    from S$679.90
    Min. 4 days
  24. Chemical Resistant Rolling Cart
    TRUSCO Chemical Resistant Rolling Cart
    Equal load per unit 200kg The middle shelf board can be adjusted at a pitch of 25 mm. The shelf board has an electrolytic polishing finish with a 6Φ fall prevention guide.
    from S$1,599.00
    Min. 32 days
  25. 450x300x775mm / 8kg Rolling Cart (Stainless Steel)
    ESCO 450x300x775mm / 8kg Rolling Cart (Stainless Steel)
    Number of Tiers  Esco Part No.  EA956MB-1 
    from S$499.90
    Min. 4 days
  26. 600x450x835mm / 3-Tier Rolling Cart (Stainless Steel)
    ESCO 600x450x835mm / 3-Tier Rolling Cart (Stainless Steel)
    Mass (kg)  13  Load Capacity (kg/Shelf)  15  Number of Tiers  3 steps  Dimension (mm)  600×450×835(H)  Caster Diameter (Φmm)  75  Esco Part No.  EA956MV-23  Material  Stainless steel (SUS430)  Material (Wheel)  Urethane 
    from S$499.90
    Min. 4 days
  27. Handy Carry
    AS ONE Handy Carry
    Mass (kg)  13.7  As ONE Part Number  3-406-01  Dimension (mm)  650×440×935  Drawer  None 
    from S$789.90
    Min. 4 days
  28. 800x400x875mm / 20kg Rolling Cart (Stainless Steel)
    ESCO 800x400x875mm / 20kg Rolling Cart (Stainless Steel)
    Number of Tiers  Esco Part No.  EA956MF-1 
    from S$1,299.00
    Min. 4 days
  29. 750x450x835mm / 2-Tier Rolling Cart (Stainless Steel)
    ESCO 750x450x835mm / 2-Tier Rolling Cart (Stainless Steel)
    Load Capacity (kg/Shelf)  15  Mass (kg)  18  Number of Tiers  2nd grade  Caster Diameter (Φmm)  75  Dimension (mm)  750×450×835(H)  Esco Part No.  EA956MV-33  Material  Stainless steel (SUS430)  Material (Wheel)  Urethane 
    from S$769.90
    Min. 4 days
  30. 600x450x750mm / 10kg Rolling Cart (Made of Stainless Steel)
    ESCO 600x450x750mm / 10kg Rolling Cart (Made of Stainless Steel)
    Number of Tiers  Esco Part No.  EA956MA-2 
    from S$469.90
    Min. 4 days
  31. Folding Stainless Rolling Cart
    KENIS Folding Stainless Rolling Cart
    The shelves can be opened on one side or both sides, and can stand on their own in the folded state.
    Wheel Diameter (Φmm)  100  Number of Shelves  Stopper  2 pieces  Allowable Load  30kgf / stage  Drawer  None  Material (Wheel)  Nylon elastomer  Material  Stainless steel SUS430 
    from S$1,199.00
    Min. 11 days
  32. Workbench with Drawers (Simple Type/SUS)
    ESCO Workbench with Drawers (Simple Type/SUS)
    Since it is a simple type, please be careful about the load capacity. Easy to assemble, no screws or screws, no tools required Made in Japan special caster set available (EA986P) * [Customer assembly]
    from S$689.90
    Min. 3 days
  33. Stainless Steel Conductive Heavy Wagon Large NEH Series
    AS ONE Stainless Steel Conductive Heavy Wagon Large NEH Series
    A stainless wagon with conductive casters as standard equipment (with diagonal stoppers). Heavy measuring instruments can be mounted and transported. The top plate and shelf plate have a fall prevention frame. It has excellent chemical resistance, rust resistance, and durability. Robust design th... Read More
    from S$669.90
    Min. 5 days
  34. 600x450x850mm / 16kg Rolling Cart (Made of Stainless Steel)
    ESCO 600x450x850mm / 16kg Rolling Cart (Made of Stainless Steel)
    Number of Tiers  Esco Part No.  EA956MD-1 
    from S$789.90
    Min. 4 days
  35. 750x450x835mm / 2-Tier Rolling Cart (Stainless Steel)
    ESCO 750x450x835mm / 2-Tier Rolling Cart (Stainless Steel)
    Mass (kg)  12  Load Capacity (kg/Shelf)  15  Number of Tiers  2nd grade  Caster Diameter (Φmm)  75  Dimension (mm)  750×450×835(H)  Esco Part No.  EA956MV-22  Material  Stainless steel (SUS430)  Material (Wheel)  Urethane 
    from S$489.90
    Min. 4 days
  36. Height adjustment legs (flat ball type/stainless steel)
    ESCO Height adjustment legs (flat ball type/stainless steel)
    from S$11.99
    Min. 3 days
  37. Height Adjustment Legs (Ball Type/Made of Nylon Resin)
    ESCO Height Adjustment Legs (Ball Type/Made of Nylon Resin)
    It is resistant to rust and corrosion, and can be used semi-permanently because there is no crushing of the threads.
    from S$5.89
    Min. 3 days
  38. Stainless Steel Wagon SUS430 3 Shelves
    Shinko Stainless Steel Wagon SUS430 3 Shelves
    Prevents falling from the shelf.
    from S$749.90
    Min. 7 days
  39. 600x450x835mm / 2-Tier Rolling Cart (Made of Stainless Steel)
    ESCO 600x450x835mm / 2-Tier Rolling Cart (Made of Stainless Steel)
    Mass (kg)  14  Load Capacity (kg/Shelf)  15  Number of Tiers  2nd grade  Dimension (mm)  600×450×835(H)  Caster Diameter (Φmm)  75  Esco Part No.  EA956MV-31  Material  Stainless steel (SUS430)  Material (Wheel)  Urethane 
    from S$669.90
    Min. 4 days
  40. Rolling Cart (Made of Stainless Steel)
    ESCO Rolling Cart (Made of Stainless Steel)
    4 free casters (2 of which have stoppers), assembly type (tool required). The top plate can be assembled to either a dish type or a flat type for fall prevention. The mounting height of the shelf board can be adjusted. * Customer assembled product.
    Working surface dimensions (mm)  (Effective) 447 × 297  Load Capacity (kg/Shelf)  20  Number of Tiers  3 steps  Caster Diameter (Φmm)  40 (rubber)  Mass (kg)  Shelf Spacing (mm)  Approx. 100 (adjustable height)  Material  Stainless steel (SUS430) 
    from S$199.90
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 61

Set Ascending Direction