All Category

Electric Welders

View : Grid List
Filter

Items 1 - 40 of 1893

Set Ascending Direction
  1. Copper Pipe Sleeve
    TRUSCO Copper Pipe Sleeve
    A copper pipe sleeve for connecting electric wires.
    Rating:
    87%
    from S$9.79
    Min. 2 days
  2. Electric Heater Bobbin for FL Gun
    FUJI IMPULSE Electric Heater Bobbin for FL Gun
    An electric bobbin for FL guns that is standard equipment on the PVC welding machine NS-300.
    Mass (g)  100  Power Input (V)  100  Main Unit Dimensions, Width W x Depth D x Height H (mm)  28×103×28  Trusco Part No.  390-4008  Power Consumption (W)  600  Suitable for  NS-300  Specification  With elastomer grip 
    Rating:
    80%
    from S$25.99
    Min. 2 days
  3. Ultra-fine mild steel / stainless steel tip 0.9Φ
    STAR ELECTRIC MANUFACTURING (SUZUKID) Ultra-fine mild steel / stainless steel tip 0.9Φ
    Type  0.9Φ  Suitable for  SAY-150N  Trusco Part No.  818-5978 
    Rating:
    20%
    from S$15.99
    Min. 2 days
  4. Secondary cable set for DC arc welding machine PRIDE 200DA
    I-PEC Secondary cable set for DC arc welding machine PRIDE 200DA
    Rating:
    90%
    from S$149.90
    Min. 2 days
  5. Adapter for 100V power supply
    STAR ELECTRIC MANUFACTURING (SUZUKID) Adapter for 100V power supply
    Comes with a 200V connector body, 100V 3P rubber plug, and 100V 2P adapter. It is possible to change the power supply of the input power supply 100V / 200V model without replacing the 200V 4P plug.
    from S$53.99
    Min. 2 days
  6. Feeding Roll for Feeder System (Steel 30 ° V Groove)
    DAIHEN Feeding Roll for Feeder System (Steel 30 ° V Groove)
    It is a replacement part for Daihen feeding device.
    Rating:
    100%
    from S$67.99
    Min. 2 days
  7. Feed roller for feeder
    Panasonic Smart Factory Solutions Feed roller for feeder
    Feed roller for feeder replacement.
    Rating:
    100%
    from S$85.99
    Min. 2 days
  8. Metal outlet plug
    DAIHEN Metal outlet plug
    from S$29.99
    Min. 2 days
  9. SUS tube for feeder
    Panasonic Smart Factory Solutions SUS tube for feeder
    A SUS tube for replacing the feeder.
    Rating:
    100%
    from S$15.99
    Min. 2 days
  10. Gear Roller "SUKESAN"
    Techno Gear Roller "SUKESAN"
    Solves the problem of wire feeding performance, stable welding Spatter is significantly reduced, the process is shortened, the beat surface is smooth, the appearance is greatly improved, the appearance is greatly improved, and it contributes to trouble prevention. Approximately twice the wear res... Read More
    Suitable Wire Diameter (Φmm)  0.6~2.0 
    Rating:
    70%
    from S$159.90
    Min. 2 days
  11. Plug plug, set of 2
    KXYDEN TECHNO (Kxyden Industry) Plug plug, set of 2
    Consumables used for plug-in type welders Metal fittings used for socket type welders on the main body side * Not suitable for inverter welding machines.
    Rating:
    100%
    from S$29.99
    Min. 2 days
  12. Starter kit (semi-automatic)
    STAR ELECTRIC MANUFACTURING (SUZUKID) Starter kit (semi-automatic)
    This is a start package with all the necessary items for those who are new to semi-automatic welding machines.
    Suitable Model  SAY-80L2、SAY-120、SAY-150N  Mass (kg)  2.95  Dimensions, Width W x Length L x Height H (mm)  300×250×80 
    Rating:
    100%
    from S$78.99
    Min. 2 days
  13. Booster high up
    STAR ELECTRIC MANUFACTURING (SUZUKID) Booster high up
    You can easily correct the voltage drop of 100V. With a 15% UP / 25% UP boost switch, you can select from two types of output voltage: 15% UP and 25% UP of the input voltage. The same voltage is output to the two outlets, and if it is within the capacity, the two outlets can be used at the same t... Read More
    Input voltage  100V only  Output Voltage (V)  115/125  Output of Outlet  115V / 125V 2 each  Rated Output Capacity (kVA)  2 (1 hour rating, 1.5kVA continuous)  Dimension (mm)  200×180×166  Frequency (Hz)  50/60  Trusco Part No.  818-6009  Mass (kg)  About 7  Number of Phases  Single-phase 
    Rating:
    100%
    from S$369.90
    Min. 2 days
  14. Nozzle for hot jet
    Matsuden Nozzle for hot jet
    from S$28.99
    Min. 2 days
  15. Chip for SIG-140
    STAR ELECTRIC MANUFACTURING (SUZUKID) Chip for SIG-140
    from S$15.99
    Min. 2 days
  16. Power extension plug connector 10M
    STAR ELECTRIC MANUFACTURING (SUZUKID) Power extension plug connector 10M
    Power supply extension cabtyre S-VCT 3.5sq x 10m. With grounding 3P-20A-250V (plug / socket) on both ends. It can be used to extend the power cord with an allowable current of 25A. Power cord extension. * Allowable current is 25A.
    Ground  3P-20A-250V  Power Cable  S-VCT3.5sq×10m 
    from S$159.90
    Min. 2 days
  17. Parts for gouging torch (YT-700N)
    Panasonic Smart Factory Solutions Parts for gouging torch (YT-700N)
    Rating:
    100%
    from S$1.59
    Min. 2 days
  18. Pressure roll for feeder
    DAIHEN Pressure roll for feeder
    It is a replacement part for Daihen feeding device.
    from S$14.99
    Min. 2 days
  19. 200V 4P20A waterproof plug
    MIGHT INDUSTRY 200V 4P20A waterproof plug
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$23.99
    Min. 2 days
  20. Pressure roller for feeder
    Panasonic Smart Factory Solutions Pressure roller for feeder
    Pressurized roller (bush built-in) for feeder replacement.
    from S$26.99
    Min. 2 days
  21. Feeding roll
    DAIHEN Feeding roll
    from S$67.99
    Min. 2 days
  22. Parts for remote control (YC301URTRK1)
    Panasonic Smart Factory Solutions Parts for remote control (YC301URTRK1)
    Rating:
    100%
    from S$1.59
    Min. 2 days
  23. Metal outlet for relay
    DAIHEN Metal outlet for relay
    from S$38.99
    Min. 2 days
  24. Battery (maintenance free)
    MIGHT INDUSTRY Battery (maintenance free)
    Rating:
    60%
    from S$239.90
    Min. 2 days
  25. R-type stand for plastic jet
    SURE (ISHIZAKI ELECTRIC MFG) R-type stand for plastic jet
    It is a stand for Prajet. Used when temporarily placing a handy hot air blower. It can be easily used when you want to blow hot air upward.
    Suitable Model  PJ-203A、203A1、206A、206A1、208A、208A1、214A  Mass (g)  48  Material  Steel wire  Trusco Part No.  805-2542 
    from S$11.99
    Min. 2 days
  26. F type electrode tip
    Panasonic Smart Factory Solutions F type electrode tip
    Rating:
    100%
    from S$15.99
    Min. 2 days
  27. Power supply extension 3. 5sqX10M
    STAR ELECTRIC MANUFACTURING (SUZUKID) Power supply extension 3. 5sqX10M
    Single-phase 100V power extension cabtyre cord. Comes with a waterproof plug and connector body. 100V extension cord.
    Cable Length (m)  10  Code type  VCT3.5sq x 2 cores 
    from S$129.90
    Min. 2 days
  28. R type electrode tip
    Panasonic Smart Factory Solutions R type electrode tip
    from S$15.99
    Min. 2 days
  29. Crank tip
    Panasonic Smart Factory Solutions Crank tip
    Taper  1/10  Dimension A (Φmm)  16  Dimension C (mm)  40  Material  CuCr 
    from S$47.99
    Min. 2 days
  30. TIG welder parts FAN motor only
    Panasonic Smart Factory Solutions TIG welder parts FAN motor only
    from S$229.90
    Min. 2 days
  31. E type electrode tip
    Panasonic Smart Factory Solutions E type electrode tip
    Material  CuCr#2 
    from S$23.99
    Min. 2 days
  32. Chip holder
    Panasonic Smart Factory Solutions Chip holder
    from S$159.90
    Min. 5 days
  33. Parts for feeding device Gas valve (set)
    Panasonic Smart Factory Solutions Parts for feeding device Gas valve (set)
    from S$149.90
    Min. 2 days
  34. Nozzle for SIG-140
    STAR ELECTRIC MANUFACTURING (SUZUKID) Nozzle for SIG-140
    Length (mm)  Φ75  Trusco Part No.  818-5959 
    from S$17.99
    Min. 2 days
  35. Outread guide for feeder
    DAIHEN Outread guide for feeder
    It is a replacement part for Daihen feeding device.
    Suitable Wire Diameter (Φmm)  1.8-1.2 
    from S$15.99
    Min. 2 days
  36. Chip for IS-IAP15S
    IKURA SEIKI Chip for IS-IAP15S
    Rating:
    100%
    from S$109.90
    Min. 2 days
  37. Parts for cooling water device (YX09KGC1)
    Panasonic Smart Factory Solutions Parts for cooling water device (YX09KGC1)
    from S$1.59
    Min. 24 days
  38. Electrode for IS-IAP15S
    IKURA SEIKI Electrode for IS-IAP15S
    Rating:
    100%
    from S$99.90
    Min. 2 days
  39. Hot Jet Parts
    Matsuden Hot Jet Parts
    Suitable for  K-1 bobbin for Matsuden hot jet 15N 
    from S$76.99
    Min. 2 days
  40. Feeder parts Countersunk machine screw
    Panasonic Smart Factory Solutions Feeder parts Countersunk machine screw
    from S$3.19
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 1893

Set Ascending Direction