Welding Rods
A welding rod is a filler metal used to bond the base metal during welding. The filler metal has the role of increasing the welding strength and beautifully finishing the appearance of the joint of the base metal. Of these, rod-shaped welding rods are often used. In order to weld the base metal firmly, it is important to select a suitable product for stainless steel, mild steel, casting, etc. according to the welding method and the material of the base material. Welding rods for hardfacing are used to restore mechanical strength by filling metal parts with high wear.
Other Related Pages
- Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steelA lime titanian welding rod with good welding workability, X-ray performance and mechanical properties. It has excellent workability in all postures and contains a large amount of iron powder in the coating material, so the welding speed is fast, the re-arcability is good, and the work efficiency... Read MoreColor Bar end color: White Remark Classification: NK, AB, LR, NV, BV Adsorption 120J / energy (example) JIS Standard Z3211、D4303 Elongation (%) 32 (example) Tensile Strength (N/mm2) 460 (example) Yield Point (N/mm2) 410 (example) RoHS directive (corresponding to 10 substances) Correspondence
-
- Shoei Shokai For SK gouging carbon DCGouging rods are used for welding back chipping, groove removal, defect chipping of welds, etc. for steel frames, bridges, shipbuilding, can manufacturing, etc., and for cutting hot water and sprue parts of castings, nest chipping, etc. It may be. This is a carbon electrode rod used in the arc ai... Read MoreType General purpose
-
-
- NIKKO YOZAI MFG Shielded metal arc welding rod (for hardened overlay) BK-700BKR-700 is a high titanium oxide welding rod that emphasizes stable hardness and workability. Since it is a high-hardness martensitic welding rod containing C, Cr, and Mo, it exhibits excellent performance against severe earth and sand wear. In addition, it is difficult to machine with the build-... Read MoreColor Rod end / yellow JIS Standard Z3251 DF3C-700-B Insulation basic RoHS directive (corresponding to 10 substances) Correspondence
- NIKKO YOZAI MFG Welding rodsIron powder is added to the lime titanian coating material to re-arc and improve work efficiency. Especially in the case of fillet welding, the slag has good peelability, a beautiful bead appearance and excellent welding use novi can be obtained, which is unrivaled. In addition, by using a high c... Read MoreType Covered arc welding rod Color Rod end / Orange JIS Standard Z3211 E4303 Elongation (%) 32 Coating Lime titania type Shock Resistance (Destruction) Impact value: 114J Tensile Strength (N/mm2) 466 Yield Point (N/mm2) 425 Insulation Lime titania type RoHS directive (corresponding to 10 substances) Correspondencefrom S$259.90Min. 5 days
- Kobelco (Kobe Steel) Mild Steel~550 MP a Class Steel Welding RodA lime titania welding rod that reduces the amount of fume generated during welding by approximately 30% compared to other welding rods of the same type. An excellent welding rod with good re-arcing properties, bead elongation, and excellent slag peeling. The flexibility of the coating is good, s... Read MoreJIS Standard Z3211 E4303 (formerly Z3211 D4303) Coating Lime titania type AWS Standard A5.1 E6013 applicable
- STAR ELECTRIC MANUFACTURING (SUZUKID) Coated arc welding rod for low voltage mild steel B-1Stable arc welding is possible even at low voltage such as 100V / 200V small welding machines. Shielded metal arc welding rod for low voltage mild steel. A high titanium oxide welding rod suitable for welding thin plates and light structures where appearance is important.JIS Standard JISZ3211E4313
- Kobelco (Kobe Steel) Welding Rod LB-52A welding rod with good bead appearance and slag peelability, as well as excellent X-ray performance and mechanical properties. Welding of shipbuilding, bridges, construction, pressure vessels, etc. using mild steel and 490N / mm class 2 high-strength steelJIS Standard Z3211 E4916 U (former Z3212 D5016) AWS Standard A5.1 E7016 applicable RoHS directive (corresponding to 10 substances) Correspondence
- Kobelco (Kobe Steel) Welding rod for stainless steelWelded metal with excellent heat resistance, corrosion resistance and mechanical properties can be obtained as it is welded. Since the austenite structure contains an appropriate amount of ferrite, it has low cracking sensitivity and excellent weldability. For welding between SUS304 (18% Cr-8% Ni... Read MoreSuitable for SUS304 Color Bar end color: yellow Remark Classification: NK, ABS, DNV, GL Type SUS304 stainless steel JIS Standard Z3221 ES308-16 (former Z3221 D308-16) AWS Standard A5.4 E308-16 applicable RoHS directive (corresponding to 10 substances) Correspondence
- Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steelA welding rod designed with both workability and weldability in mind, and can be applied to all-position butt welding and fillet welding from thin plates to thick plates of about 20 mm or less. The horizontal fillet welding gives good slag and good spread of the beat, and the appearance of the be... Read MoreColor Stick end color: light brown Standard Patent No.1533782 Adsorption 110J / energy (example) Elongation (%) 32 (example) AWS Standard AWS A5.1 E6019 applicable Tensile Strength (N/mm2) 460 (example) Yield Point (N/mm2) 410 (example)
- STAR ELECTRIC MANUFACTURING (SUZUKID) Coated arc welding rod for stainless steel S-1Shielded metal arc welding rod for low voltage stainless steel.Suitable for SUS304/306/308 JIS Standard D308-16
- JKW (JFE Welding Rod) Welding rodsThe arc is soft and there is less spatter. The re-arc is very good. The amount of fume generated during welding is small, improving the working environment at the welding site. It has a wide welding current width and good rod bendability, so it has excellent workability in all postures. The slag ... Read MoreSpecification Shinko ZERODE-44 or equivalent Type For mild steel JIS Standard Z3211E4303 Coating Lime titania type RoHS directive (corresponding to 10 substances) Correspondence
- Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steelDesigned with an emphasis on welding workability, it can be applied to all-position butt welding and fillet welding from thin plates to thick plates of about 20 mm or less. Especially in downward welding, the slag fog is stable, slag is less likely to get caught, and a stable, glossy and beautifu... Read MoreColor Bar end color: green Standard Patent No.1533782 Adsorption 95J / energy (example) Elongation (%) 30 (example) AWS Standard AWS A5.1 E6019 applicable Tensile Strength (N/mm2) 450 (example) Yield Point (N/mm2) 400 (example)
- Kobelco (Kobe Steel) Welding Rod for Mild Steel to 550 MPa Class SteelDesigned with an emphasis on weldability, it has excellent crack resistance, pit resistance and X-ray performance among illuminant-based welding rods. * The package design will change sequentially depending on the manufacturer's distribution inventory. *Exterior and interior dimensions, perfo... Read MoreColor Bar end color: yellow JIS Standard Z3211 E4319 (former Z3211 D4301) Coating Illuminite series RoHS directive (corresponding to 10 substances) Correspondence
- Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steelA low hydrogen omnidirectional welding rod for mild steel designed with efficiency in mind in addition to weldability and workability. The weld metal has excellent X-ray performance, mechanical properties, and workability in all postures, and because the coating material contains iron powder, the... Read MoreColor Bar end color: Blue white JIS Standard Z3211 E4316 U (former Z3211 D4316)
- Nippon STeel Welding & Engineering (Former Nippon Steel & Sumikin Welding) Lime titania coated arc welding rod NS-03HiLow fume, low moisture absorption type For general structures. Compared to the same type of welding rod, the amount of fume during welding is reduced by about 20%. It has excellent re-arcability, and smooth temporary welding can be performed even with a small welding machine or engine welder with... Read MoreSpecification Shinko ZERODE-44 or equivalent
- NIKKO YOZAI MFG Low Current Mild Steel Shielded Metal Arc Welding Rod For Small Welding MachineConvenient welding rod Insulation in a portable case, anyone can easily weld, and a beautiful bead can be obtained with little spatter adhesion even at low currents. In particular, the slag in fillet welding has good peelability and improves work efficiency. Thin plates and general hardware, cons... Read MoreRoHS directive (corresponding to 10 substances) Correspondence
- Kobelco (Kobe Steel) Welding Rod for Mild Steel to 550 MPa Class SteelA highly titanium oxide welding rod that has good workability especially in downward and horizontal fillet welding. Welding and decorative filling of thin plates and light structures such as general machines, vehicles, and lightweight steel frames that use mild steelJIS Standard Z3211 E4313 (old Z3211 D4313) Coating High titanium oxide
- MonotaRO Welding rod For stainless steel Small amountWelded metal with excellent heat resistance, corrosion resistance and mechanical properties can be obtained as it is welded. Since the austenite structure contains an appropriate amount of ferrite, it has low cracking sensitivity and excellent weldability. For welding between SUS304 (18% Cr-8% Ni... Read MoreSuitable for SUS304 Mass (g) About 200 Type SUS304 stainless steel JIS Standard Z3221 D308-16 Rod Diameter (Φmm) 2.6 AWS Standard A5.4 E308-16 applicable
- Kobelco (Kobe Steel) Welding rod for stainless steelSince the austenite structure contains a relatively large amount of ferrite, it has low cracking sensitivity, and a welded metal with excellent heat resistance and corrosion resistance can be obtained as it is welded. In addition, it has a large amount of alloy and shows a stable structure mainly... Read MoreSuitable for SUS309 for different base materials Adsorption 62J / Energy (example) JIS Standard Z3221 ES309-16 Elongation (%) 39 (example) AWS Standard A5.4 E309-16 Tensile Strength (N/mm2) 590 (example) Yield Point (N/mm2) 410 (example) Yield Strength (N/mm2) 410 (0.2%, one example)
- TRUSCO Stainless Welding RodAn austenitic stainless steel welding rod with a structure of 19% Cr-9% Ni. Good slag peelability and arc stability, less spatter, and excellent bead appearance. It also has good bar burnability, which is a drawback of stainless steel welding rods. JIS Z3211D308-16 standard product (excluding TSS... Read More
- NIKKO YOZAI MFG Non-sputter coated arc welding rod for stainless steelA stainless steel shielded metal arc welding rod that does not spatter. It reduces unnecessary costs such as spatter removal work, improves welding workability in all postures, and has excellent slag peelability. Efficiently obtains a beautiful bead appearance. Common gold welding of SUS304 (18Cr... Read MoreSuitable for SUS304 Color (Stick end): yellow AWS Standard AWS A5.4 E308-16
- STAR ELECTRIC MANUFACTURING (SUZUKID) Starload Z-3 Coated arc welding rod for mild steelWith advanced welding technology, stable arc and slag fluidity and re-arcability are good, and high-efficiency welding can be expected. Has a high level of welding technology workability. Stable arc, slag fluidity, and maximum arc performance are good, and high-efficiency welding is possible. Wel... Read MoreType Lime titania and JIS / D4303 equivalent Elongation (%) 30 or more
- Kobelco (Kobe Steel) Welding Electrode For Hard Tensile SteelShows martensite structure and is suitable for light impact wear and earth and sand wear. Machining is difficult. Overlay welding of lower rollers, bucket edges, etc.Color Bar end color: red, secondary color: red JIS Standard Z3251 DF2B-600-Bfrom S$47.99Min. 2 days
- Kano Kasei Welding rod carrying case Worker Y typeStoring the welding rod in the worker eliminates waste of the welding rod due to moisture absorption, rain leakage, and neglect. It also eliminates the scattering of welding rods at the work site. The true value of advanced welding technology can be fully demonstrated by preventing deterioration ... Read MoreSpecification Round hook type (lid half open) Material Polypropylene
- STAR ELECTRIC MANUFACTURING (SUZUKID) Star Road electric welding rod (general for iron) B-3Shielded metal arc welding rod for basic mild steel. * Be sure to read the instruction manual of the welding machine to be used before use. * Do not look directly at the arc light during welding. Use a light-shielding surface as it may damage your eyes. * Welded parts are hot. Be careful not to g... Read MoreType Lime titania and JIS / D4303 equivalent Elongation (%) 17 or more
- TRUSCO Welding rod for castingUsing pure nickel core wire, the welded part is rough, machining is easy, welding strain and stress are less generated, and cracks are less likely to occur. The arc is stable and the slag peeling is good. Repair welding of general cast iron.
- KISWEL Welding rod (for general use)For welding vehicles, bridges, lightweight steel frames, and other general structures. Equivalent to Shinko Z-44. For welding vehicles, bridges, lightweight steel frames, and other general structures.Specification Shinko ZERODE-44 or equivalent Type Covered arc welding rod JIS Standard Z3211 E4303 (formerly Z3211 D4303) Coating Lime titania type
- H&H Welding rod for stainless steelThis product is a repacked product of Nikko Welding Materials Co., Ltd. welding rods for small-lot sales. 19Cr-9Ni Austenite welding rod with excellent workability obtained by welding metal. Most widely used in stainless steel.Suitable for SUS304 JIS Standard Z3221 ES308-16 (former Z3221 D308-16)
- MonotaRO Welding rod for stainless steelIt has arc stability, a clean appearance, and excellent resistance to corrosion. Suitable for corrosion-resistant stainless steel with a welding temperature of 300 ° C or less. * During welding, inhaling the generated fume and gas may damage your health, so please exhaust and ventilate and wear p... Read MoreSuitable for SUS304 Current (A) 50～80 JIS Standard Z3221 D308-16 equivalent Rod Diameter (Φmm) 2.5 AWS Standard A5.4 E308-16 equivalent
- TRUSCO General mild steel welding rodA lime titanian welding rod containing approximately 30% iron powder in the coating agent. It has excellent re-arcing properties and good bead elongation, making it ideal for intermittent welding, fillet welding, tack welding (temporary attachment), etc. Thin / middle plate Welding of general str... Read MoreColor (Stick end) red JIS Standard JIS Z3211D4303 standard product
- Kobelco (Kobe Steel) Welding rod Z-1ZSince the arc is strongly blown and the concentration is good, zinc vapor can escape well and pits and blow holes can be suppressed to a small extent. The arc stability is extremely good, the characteristic zinc vapor explosion is minimized, and low spatter can be achieved. Good slag coverage and... Read MoreJIS Standard Z3211 E4340 Elongation (%) 26 Tensile Strength (MPa) 450 Withstand Pressure (MPa) 380 Absorption Energy (J) 100 RoHS directive (corresponding to 10 substances) Correspondencefrom S$49.99Min. 2 days
- Kobelco (Kobe Steel) Welding rod RB-26A high titanium oxide welding rod that can be welded vertically and downward with a rod diameter of 1.6 to 5.0 mm. Since the arc is stable and a glossy bead with less spatter can be obtained, it is ideal for welding thin plates and light structures, mainly vertical downward welding. For vertical ... Read MoreColor Bar end color: Black Elongation (%) 23 (example) Tensile Strength (N/mm2) 510 (example) Yield Point (N/mm2) 450 (example) RoHS directive (corresponding to 10 substances) Correspondence
- TRUSCO Mild Steel Welding RodA high titanium oxide welding rod with good workability in downward and horizontal fillet welding, with stable arc, less spatter, and good slag peelability. Welding rods for low-voltage welding machines for thin plates and light structures (100V compatible). Welding of general machinery, vehicles... Read MoreSpecification Shinko B-33 or equivalent Color (Stick end) white JIS Standard JIS Z3211D4313 standard product
- H&H Welding rod For castingThis product is a repacked product made by Nikko Molten Co., Ltd. for small-lot sales. Since it uses a nickel core wire and is coated with a special flux, it can be used with a lower current than other companies' products.Specification Arc welding rod JIS Standard Z3252 DFCNi Coating Graphite
- Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steelIt is used for the first layer of the joint, and the back side can be omitted, which contributes to efficiency improvement. The arc is designed to be stable on the lower current side than general welding. A beautiful back bead is obtained and it is also used in skill competitions. It is often use... Read MoreJIS Standard Z3211 E4316 (former Z3211 D4316) AWS Standard A5.1 E7016 applicable
- Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steelThe most basic low hydrogen rod. It has excellent X-ray performance and mechanical properties, good arc stability, slag peeling, and bead appearance, and can be easily welded to all postures. It is also used for skill tests.
Filter by categories
