All Category

Mechanical Elements

A mechanical part is a term used to refer to a part that is used to move a machine at a manufacturing site that makes automobiles or home appliances, or is used for various familiar items. In addition to bearings, various parts such as chains, motors, and gears are applicable. They are used in many places, such as motor belts, fishing gear reels, drawer rails, etc., from household appliances to factories and hospitals such as reduction gears and medical gas meters, and are also sold at home centers.
View : Grid List
Filter

Items 1 - 40 of 29824

Set Ascending Direction
  1. V Belt Type B (Standard)
    Mitsuboshi Belting V Belt Type B (Standard)
    It is a set-free belt that does not stretch or shrink over time during use and is suitable for multiple hangings, and can be expected to have a long belt life. In addition, it is easy to obtain by handling it as a standard V-belt.
    Operating Temperature Range (℃)  -40~+70  Belt Height (mm)  11.0  Minimum Pulley Diameter (mm)  150  Belt Top Width (mm)  16.5  Maximum Speed (m/sec)  30  Offset Angle (°)  40  Electrical Resistance Value  50MΩ or more  Belt Shape  Material (Belt)  Rubber  Type  V-belt 
    Rating:
    92%
    from S$13.99
    Min. 2 days
  2. V belt A type standard
    MonotaRO V belt A type standard
    A conductive V-belt that can be widely used in general industrial machinery. For conduction belts. * Please do not use it for any other purpose.
    Belt Top Width (mm)  12.5  Elongation(%)  Tensile Strength (kN)  4.4  Belt Height (mm)  Material  Rubber 
    Rating:
    83%
    from S$3.19
    Min. 2 days
  3. Miniature Ball Bearing / Small Diameter Ball Bearing ZZ (Standard Type) (No Flange)
    NTN Miniature Ball Bearing / Small Diameter Ball Bearing ZZ (Standard Type) (No Flange)
    Miniature ball bearings have a nominal bearing outer diameter of D <9 mm, small diameter ball bearings have a nominal bearing inner diameter of d <10 mm, and nominal bearing outer diameter D ≥ 9 mm. There are metric type and inch type. Most commonly used seal-shield bearings have a width of... Read More
    JIS Grade  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Rolling Element Material  High carbon chromium bearing steel  Material (Main Unit)  High carbon chromium bearing steel  Load Direction  Radial  Shield Shape  Shielded on both sides  Number of Track Trains  Single row  Flange  Without flange 
    Rating:
    97%
    from S$2.39
    Min. 2 days
  4. Single Row Deep Groove Ball Bearing 6200 Series ZZ
    NSK (Nippon Seiko) Single Row Deep Groove Ball Bearing 6200 Series ZZ
    Single row deep groove ball bearings are the most typical type of rolling bearings and have a wide range of uses. The orbital grooves provided on the inner and outer rings form a cross section of an arc having a radius slightly larger than the radius of the rolling ball. In addition to radial loa... Read More
    Mounting Dimension (Minimum Dx) (Φmm)  Dimension D1 (Φmm)  Dimension rN (mm)  Remark  Dimension D2 (Φmm)  Dimension f (mm)  Dimension a (mm)  Dimension b (mm)  Dimension r0 (mm)  Mounting Dimensions (Maximum Cx) (mm) 
    Rating:
    98%
    from S$3.59
    Min. 2 days
  5. Deep Groove Ball Bearings 6200 Series ZZ
    MonotaRO Deep Groove Ball Bearings 6200 Series ZZ
    * Do not use for anything other than its intended purpose.
    Race Ring Shape  Deep groove ball bearings  Shield Shape  Double-sided steel plate shield type  Outer Ring Type  Flat  Material (Main Unit)  High carbon chromium bearing steel  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    92%
    from S$1.89
    Min. 2 days
  6. RS Roller Chain Single Row
    TSUBAKI (Tsubakimoto Chain) RS Roller Chain Single Row
    A large reduction ratio can be obtained. (Generally up to 1:7) A relatively long distance between axes (usually 4m or less) can be obtained. There is a large degree of freedom in the distance between shafts. Multi-axis transmission is possible. Both sides are available. Easy to install and replac... Read More
    Single or Double Strand  Type  Unit  Material (Main Unit)  Steel  Included Accessories  With 1 connecting link 
    Rating:
    96%
    from S$16.99
    Min. 2 days
  7. DDL-ZZ Series Thin Double Shield Radial Ball Bearing
    NMB (Minebea) DDL-ZZ Series Thin Double Shield Radial Ball Bearing
    It is a miniature bearing that is often used in information and communication equipment centered on personal computers, home appliances, and control motors for automobiles. It is a precision part used for the part that receives the shaft in order to stably rotate the shaft of rotating equipment t... Read More
    JIS Grade  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Material (Main Unit)  Martensitic stainless steel  Rolling Element Material  Martensitic stainless steel  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    95%
    from S$3.89
    Min. 2 days
  8. Steel Ball (Precision Ball) SUJ2 mm Size
    TSUBAKI NAKASHIMA Steel Ball (Precision Ball) SUJ2 mm Size
    Rating:
    95%
    from S$0.80
    Min. 2 days
  9. Deep Groove Ball Bearings 6200 Series LLB (Double Non-Contact Rubber Seal Type)
    NTN Deep Groove Ball Bearings 6200 Series LLB (Double Non-Contact Rubber Seal Type)
    Deep groove ball bearings that are most widely used among bearings. Deep groove ball bearings have deep arcuate grooves on both the inner and outer rings, and can receive radial loads, axial loads in both directions, or combined loads that are a combination of these, making them suitable for high... Read More
    JIS Grade  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Rolling Element Material  High carbon chromium bearing steel  Material (Main Unit)  High carbon chromium bearing steel  Shield Shape  Non-contact seal type on both sides  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    93%
    from S$3.99
    Min. 2 days
  10. Set Collar Standard
    MonotaRO Set Collar Standard
    This is convenient when you want to adjust the position. * Do not use for anything other than its intended purpose.
    Surface Treatment  Black dyed  Material  S45C  Type  Standard 
    Rating:
    95%
    from S$1.69
    Min. 2 days
  11. Deep Groove Ball Bearings 6000 Series ZZ
    MonotaRO Deep Groove Ball Bearings 6000 Series ZZ
    * Do not use for anything other than its intended purpose.
    Race Ring Shape  Deep groove ball bearings  Shield Shape  Double-sided steel plate shield type  Outer Ring Type  Flat  Material (Main Unit)  High carbon chromium bearing steel  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    92%
    from S$2.29
    Min. 2 days
  12. V belt C type (standard)
    Mitsuboshi Belting V belt C type (standard)
    It is a set-free belt that does not stretch or shrink during use and is suitable for multiple hangings, and can be expected to have a long belt life. In addition, it is easy to obtain by handling it as a standard V-belt.
    Operating Temperature Range (℃)  -40~+70  Belt Top Width (mm)  22  Minimum Pulley Diameter (mm)  224  Maximum Speed (m/sec)  30  Offset Angle (°)  40  Electrical Resistance Value  50MΩ or more  Belt Shape  Material (Belt)  Rubber  Type  V-belt 
    Rating:
    95%
    from S$28.99
    Min. 2 days
  13. Steel Ball SUS304 mm Size
    No Brand Steel Ball SUS304 mm Size
    Material  SUS304 
    Rating:
    98%
    from S$1.69
    Min. 2 days
  14. DC Motor
    MABUCHI MOTOR DC Motor
    It is a motor widely used for work. Country of origin: China Models, crafts, etc. * Performance table when using AA batteries. (FA, RE series) * This is a performance table when using a constant voltage power supply. (RS series)
    Number of poles (P)  Motor Type  Brushed motor  Power Supply  DC  Type  General-purpose motor  Operation Environment  Indoor (normal temperature and humidity)  With or Without Brake  None  Type of Sign  Tap 
    Rating:
    91%
    from S$4.99
    Min. 2 days
  15. Steel Ball (Precision Ball) SUJ2 inch Size
    TSUBAKI NAKASHIMA Steel Ball (Precision Ball) SUJ2 inch Size
    Ball bearings are used in rotating parts of automobiles, home appliances, motorcycles, and general machinery. Ball bearings, slide rails, ballpoint pens, seat belts, valves, bicycles, casters, door rollers, ball mills
    Hardness HRC  62~67 
    Rating:
    94%
    from S$0.74
    Min. 2 days
  16. Key Material S45C (New JIS Parallel Double-Sided Square Key Standard Product)
    TRUSCO Key Material S45C (New JIS Parallel Double-Sided Square Key Standard Product)
    You can cut it to the required length and use it. A detent for the joint between the shaft of a motor or reducer and the gear or sprocket.
    Tolerance  JIS B 1301  Length (mm)  300  Shape  Double-sided key 
    Rating:
    97%
    from S$2.19
    Min. 2 days
  17. Pencil Type Tension Meter
    Mitsuboshi Belting Pencil Type Tension Meter
    A standard spring-loaded tension measuring machine. It can be used for standard V-belt, red label V-belt, e-power series, and ultra e-power V-belt. V-belt tension measurement
    Load Range (kg)  15  Length (mm)  200  Measuring Range (mm)  60  Mass (g)  65  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel sheet 
    Rating:
    82%
    from S$99.90
    Min. 2 days
  18. Resin Ball (Urethane) (Inch Size)
    No Brand Resin Ball (Urethane) (Inch Size)
    Hardness  HS95  Material  Urethane 
    Rating:
    99%
    from S$1.29
    Min. 2 days
  19. Oiles # 80 Bush
    OILES Oiles # 80 Bush
    OILES # 80 is a non-lubricated bearing in which lubricating oil and a special filler are uniformly dispersed and contained in the resin in polyacetal. It can be used without lubrication and has excellent load resistance and wear resistance. It has a low coefficient of friction and excellent speed... Read More
    Type  # 80 Bush  Operating Temperature Range (℃)  -40~+80  Allowable Maximum Speed V (m/s [m/min])  0.85[51]  Specific Gravity  1.39  Melting Point (℃)  165  Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2])  17.5[179]  Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min]  2.45[1500]  Flexural Modulus (N/mm2[kgf /cm2])  2650[27000]  Tensile Strength (N/mm2 51.0  Izod Impact Strength (J/m[kgfcm/cm])  58.8 [6.00] (with notch)  Elongation at Break (%)  60  Bending Strength (N/mm2 76.5  Linear Expansion Coefficient (×10-5/℃)  8~13  Hardness  HRM72  Lubrication System  No lubrication  Material  Oil-impregnated polyacetal resin 
    Rating:
    95%
    from S$0.59
    Min. 2 days
  20. Single Row Deep Groove Ball Bearings 6900 Series DDU (Both Sides Contact Rubber Seal Type)
    NSK (Nippon Seiko) Single Row Deep Groove Ball Bearings 6900 Series DDU (Both Sides Contact Rubber Seal Type)
    JIS Grade  Race Ring Shape  Deep groove ball bearings  Shield Shape  Double contact seal type  Outer Ring Type  Flat  Material (Main Unit)  High carbon chromium bearing steel  Rolling Element Material  High carbon chromium bearing steel  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    87%
    from S$6.89
    Min. 2 days
  21. Steel Ball (Precision Ball) SUS440C mm Size
    TSUBAKI NAKASHIMA Steel Ball (Precision Ball) SUS440C mm Size
    This stainless steel has excellent mechanical properties by being cured by heat treatment. This feature is suitable for ball bearings, valves, etc. Ball bearings, slide rails, ballpoint pens, seat belts, valves, bicycles, casters, door rollers, ball mills
    Gauge S (μm)  +10~-10  Gauge Pitch (μm)  2.0  Hardness HRC  58~65  Material  SUS440C 
    Rating:
    94%
    from S$0.80
    Min. 2 days
  22. Stainless Bearing Double Shield Type
    NSK (Nippon Seiko) Stainless Bearing Double Shield Type
    Stainless steel bearings are the basic product of NSK special environmental bearing Spacia TM series, and are mainly suitable for high humidity environment. The lineup is affordable. Corrosion resistance superior to bearing steel. For air only, grease lubrication. The cage is made of glass fiber ... Read More
    JIS Grade  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Load Direction  Radial  Shield Shape  Shielded on both sides  Number of Track Trains  Single row 
    Rating:
    98%
    from S$6.89
    Min. 2 days
  23. Single Thrust Ball Bearings 51100 Series
    NSK (Nippon Seiko) Single Thrust Ball Bearings 51100 Series
    Thrust bearings have a contact angle of more than 30 ° and less than 90 °, primarily supporting axial loads. There is a ball between a set of track boards (axial track board and hizing track board), and the contact angle is usually 90 °. Only unidirectional axial loads can be applied, not radial ... Read More
    Rating:
    100%
    from S$7.99
    Min. 2 days
  24. Steel Ball (Precision Ball) SUS440C inch Size
    TSUBAKI NAKASHIMA Steel Ball (Precision Ball) SUS440C inch Size
    This stainless steel has excellent mechanical properties by being cured by heat treatment. This feature is suitable for ball bearings, valves, etc. Ball bearings, slide rails, ballpoint pens, seat belts, valves, bicycles, casters, door rollers, ball mills
    Hardness HRC  58~65  Material  SUS440C 
    Rating:
    99%
    from S$0.45
    Min. 2 days
  25. Shell needle roller bearing HMK type (open end type)
    NTN Shell needle roller bearing HMK type (open end type)
    It is a bearing in which an outer ring is formed from a thin steel plate by precision drawing, the raceway surface is surface-hardened, and then a needle-shaped roller and a cage are assembled. It has the smallest cross-sectional height as a bearing with an outer ring, and can reduce space and co... Read More
    Race Ring Shape  Needle roller bearing 
    Rating:
    94%
    from S$4.99
    Min. 2 days
  26. VP Pulley A1 Shaft Hole Finished Product (Shaft Hole Keyway)
    Everon VP Pulley A1 Shaft Hole Finished Product (Shaft Hole Keyway)
    Number of Flutes  Rim Width w (mm)  20 
    Rating:
    77%
    from S$28.99
    Min. 2 days
  27. Steel Ball SUS304 inch Size
    No Brand Steel Ball SUS304 inch Size
    Material  SUS304  Hardness  HRB80~95 
    Rating:
    93%
    from S$1.79
    Min. 2 days
  28. iglidur(R) G Sleeve
    Igus (R) iglidur(R) G Sleeve
    Shape 
    Rating:
    71%
    from S$0.96
    Min. 2 days
  29. Deep groove ball bearings 6200 series LLB CM / 5K
    NTN Deep groove ball bearings 6200 series LLB CM / 5K
    Deep groove ball bearings that are most widely used among bearings. Deep groove ball bearings have deep arcuate grooves on both the inner and outer rings and can receive radial loads, axial loads in both directions, or a combination of these, making them suitable for high-speed rotation. In the s... Read More
    Grease Symbol  5K (Multemp SRL, joint oil)  Symbol of Internal Clearance Preload  CM  Material (Main Unit)  High carbon chromium bearing steel 
    Rating:
    98%
    from S$3.79
    Min. 2 days
  30. Resin Ball (Duracon) (Inch Size)
    No Brand Resin Ball (Duracon) (Inch Size)
    Material  Duracon (R) 
    Rating:
    98%
    from S$0.45
    Min. 2 days
  31. Resin Ball (PP) (Inch Size)
    No Brand Resin Ball (PP) (Inch Size)
    Material  PP 
    Rating:
    96%
    from S$0.38
    Min. 2 days
  32. VP pulley A1 Shaft hole finished product (shaft hole + keyway + set screw hole 2 locations)
    Everon VP pulley A1 Shaft hole finished product (shaft hole + keyway + set screw hole 2 locations)
    Number of Flutes  Rim Width w (mm)  20  Groove Shape  Type  VP pulley 
    Rating:
    85%
    from S$35.99
    Min. 2 days
  33. Resin ball (nylon) (mm size)
    No Brand Resin ball (nylon) (mm size)
    Material  Nylon 
    Rating:
    95%
    from S$0.48
    Min. 2 days
  34. ASTERO Gear Head
    Sumitomo Heavy Industries ASTERO Gear Head
    The motor and gear head have an easy-to-use separate structure. Customers can freely assemble the gear head by themselves. Induction motor / The most widely used gear motor. Used for driving at a constant speed. Leverable motor / Gear motor that can instantly switch the direction of rotation. Use... Read More
    Rating:
    100%
    from S$74.99
    Min. 2 days
  35. LSeries Thin Double Shield Radial Ball Bearing
    NMB (Minebea) LSeries Thin Double Shield Radial Ball Bearing
    It is a miniature bearing that is often used in information and communication equipment centered on personal computers, home appliances, and control motors for automobiles. It is a precision part used for the part that receives the shaft in order to stably rotate the shaft of rotating equipment t... Read More
    JIS Grade  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    92%
    from S$2.59
    Min. 2 days
  36. Free Ball Bearing Upward 57mm Pitch
    MonotaRO Free Ball Bearing Upward 57mm Pitch
    You can put the transported object on it and move it 360 degrees freely. * Please refrain from using it for anything other than transportation.
    Allowable Load (kg)  About 15  Material  Steel, Q235, surface plating  Specification  Upward use 
    Rating:
    100%
    from S$3.49
    Min. 2 days
  37. Proside (Screw Blade)
    Dainichi Hanso Proside (Screw Blade)
    Very light (iron specific gravity: 7.85, nylon specific gravity: 1.14), which also reduces the load on the motor. It is hygienic without worrying about rust, and it is cheaper and more economical than stainless steel. It is possible to freely combine long and short, and screw assembly is very eas... Read More
    Rating:
    80%
    from S$2.89
    Min. 2 days
  38. SSY Spur Gear
    KHK Gears (Kohara Gear Industry) SSY Spur Gear
    Material  S45C 
    Rating:
    85%
    from S$6.89
    Min. 2 days
  39. Luuron Bear Fight R-ARF
    NTN Luuron Bear Fight R-ARF
    Dimension R (mm)  0.2 or less 
    Rating:
    100%
    from S$1.29
    Min. 2 days
  40. BS / DIN standard RS roller chain joint link 1 row
    TSUBAKI (Tsubakimoto Chain) BS / DIN standard RS roller chain joint link 1 row
    Single or Double Strand  Type  Roller chain  Material (Main Unit)  Steel 
    Rating:
    100%
    from S$1.29
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 29824

Set Ascending Direction