V-Belts (Energy Saving)
Energy-saving belts and ePOWER belts can save electricity compared to general belts. This is because the power loss due to bending is suppressed by the excellent flexibility due to the notch shape. Can be installed on existing V-leaves. In addition, it does not need to be re-tensioned many times, leading to a reduction in the number of hooks. Depending on the manufacturer and product, the energy-saving rate and life span will vary, so it is necessary to select them as needed. A, B, C, and AX types are available.
Other Related Pages
Mitsuboshi Belting MAXSTAR Wedge BeltBy making the cross-sectional structure a unique narrow shape, it is designed to increase the grip on the pulley. It is a V-shaped belt with high expansion power, flexibility, little deformation, and high transmission ability. Large pumps, compressors, forging presses, casting machines, paper mak... Read MoreOffset Angle (°) 40 Maximum Speed (m/sec) 40 Material (Belt) Rubber Type Wedge belt- Bando Chemical Industries Power acePower Ace is a high power transmission V-belt with greatly improved power transmission and life by changing the cross-sectional shape of the conventional V-belt. It is effective for making various transmission devices compact, labor saving in all fields, and cost reduction. Since the transmission... Read MoreRoHS directive (corresponding to 10 substances) Correspondence Material Rubber
- Bando Chemical Industries Power ace cogCog processing has a higher transmission capacity than Power Ace (20 to 30% up), and is suitable for small pulley diameters and high-speed rotation. Space saving of the transmission device is possible by reducing the number of belts. Effective for compacting various transmission devices, saving l... Read MoreRoHS directive (corresponding to 10 substances) Correspondence Material Rubber
- DONGIL RUBBER BELT Narrow V-belt 3 V seriesIt has a special cross-sectional shape with a narrower upper width and a higher height than general belts. It is a belt that gives uniform stress to the tension body when the belt runs, depending on the raw material and manufacturing method, and enhances the transmission efficiency.Material (Belt) Rubber Operating Temperature Range (℃) -30～90 Belt Shape 3V Type V-belt Offset Angle (°) 40 Minimum Pulley Diameter (mm) 67 Belt Height (mm) 8 Belt Top Width (mm) 9.5 Material (Belt) Rubber
- Mitsuboshi Belting MAXSTAR Multi Wedge Belt 3V TypeThe Maxter Multi Wedge Belt is a tie band that connects the top of the Maxter Wedge Belt. The cross-sectional shape of the belt is similar to the Maxter wedge belt. Even if the load on the prime mover or driven side fluctuates periodically, the belt length is uniform, so stable operation is possi... Read MoreBelt Shape 3V Maximum Speed (m/sec) 40 Offset Angle (°) 40 Belt Height (mm) 8 Material (Belt) Rubber Type Wedge belt
- Bando Chemical Industries Energy saving red (power saving type V belt) A typeIt saves about 3-6% power compared to standard V-belts. Since it can be mounted on the conventional standard V pulley as it is, power saving measures can be taken very economically. Unlike flat belts, there is no need to re-tension, and stable transmission is possible for a long time. Compared to... Read MoreBelt Top Width (mm) 12.7 Belt Shape A Material Rubber Type V-belt
- Mitsuboshi Belting e-Power Wedge BeltA V-belt with a unique narrow shape that demonstrates an energy-saving effect. It has a notch shape and has excellent flexibility to reduce power consumption. No special pulley is required, and power consumption can be reduced by replacing the belt with a conventional pulley. The wedge type has a... Read MoreOperating Temperature Range (℃) -30～+90 Offset Angle (°) 40 Electrical Resistance Value 6MΩ or less Material (Belt) Rubber
- Mitsuboshi Belting e-Power V-Belt Row Edge Cogged Type AXA V-belt with excellent flexibility. There is little power loss due to bending, and there is an energy saving effect. You can reduce power consumption. Conventional pulleys can be used. Compact design is possible. You can reduce the number of replacements. The cog type has a wavy dent on the bott... Read MoreOperating Limit Temperature (℃) -30～+90 Belt Top Width (mm) 13.1 Offset Angle (°) 36 Electrical Resistance Value 6MΩ or less Belt Height (mm) 9 Belt Shape AX Type V-belt Material (Belt) Rubber
- Bando Chemical Industries Energy-Saving Power AceAn energy-saving V-belt that evolved from Power Ace, which features compactness, high-speed operation, high power transmission, and long life. The torque loss has been reduced and the transmission efficiency has been improved. You can save energy and reduce CO2 without impairing the transmission ... Read MoreOperating Limit Temperature (℃) -30～90 Electrical Resistance (Ω) 6M or less Specification Notching Material Rubber
- Bando Chemical Industries Energy Saving Red (Power Saving Type V Belt) B TypeIt saves about 3-6% power compared to standard V-belts. Since it can be mounted on the conventional standard V pulley as it is, power saving measures can be taken very economically. Unlike flat belts, there is no need to re-tension, and stable transmission is possible for a long time. Compared to... Read MoreBelt Height (mm) 10.3 Belt Top Width (mm) 16.7 RoHS directive (corresponding to 10 substances) Correspondence Material Rubber Type V-belt
- DONGIL RUBBER BELT Narrow V-Belt 5 V SeriesIt has a special cross-sectional shape with a narrower upper width and a higher height than general belts. It is a belt that gives uniform stress to the tension body when the belt runs, depending on the raw material and manufacturing method, and enhances the transmission efficiency.Material (Belt) Rubber Operating Temperature Range (℃) -30～90 Belt Height (mm) 13.5 Belt Top Width (mm) 16 Minimum Pulley Diameter (mm) 180 Offset Angle (°) 40 Belt Shape 5V Type V-belt Material (Belt) Rubber
- Mitsuboshi Belting E-Power V-Belt Low-Edge Cog Type BXe-POWER has a cog shape and is excellent in flexibility. Therefore, compared to the conventional V-belt, there is less power loss due to bending, and there is an energy saving effect. It has less power loss and can reduce power consumption by 6% compared to standard V-belts. It can be used with a... Read MoreOperating Limit Temperature (℃) -30～+90 Belt Height (mm) 11.5 Belt Top Width (mm) 16.6 Offset Angle (°) 36 Electrical Resistance Value 6MΩ or less Belt Shape BX Type V-belt Material (Belt) Rubber
- Mitsuboshi Belting e-Power V-Belt Wrapped Notched Type A Typee-POWER has a notch shape and has excellent flexibility. Therefore, compared to the conventional V-belt, there is less power loss due to bending, and there is an energy saving effect. It has less power loss and can reduce power consumption by 6% compared to standard V-belts. Wrapped notched type ... Read MoreBelt Top Width (mm) 12.5 Offset Angle (°) 40 Belt Height (mm) 9.0 Belt Shape A Material (Belt) Rubber Type Wrapped notched type
- Mitsuboshi Belting e-POWER V-belt wrapped notched type B typee-POWER has a notch shape and has excellent flexibility. Therefore, compared to the conventional V-belt, there is less power loss due to bending, and there is an energy saving effect. It has less power loss and can reduce power consumption by 6% compared to standard V-belts. Wrapped notched type ... Read MoreBelt Height (mm) 11 Belt Top Width (mm) 16.5 Offset Angle (°) 40 Belt Shape B Material (Belt) Rubber Type Wrapped notched type
- Mitsuboshi Belting ULTRA e-POWER A typeULTRA e-POWER uses special core wire, special rubber, and special shape to achieve both high power saving effect and high transmission performance. The double cog shape improves flexibility and reduces bending loss during power transmission. In addition, chloroprene rubber improves deformation re... Read MoreOperating Temperature Range (℃) -30～+90 Belt Top Width (mm) 12.5 Offset Angle (°) 40 Electrical Resistance Value 6MΩ or less Belt Height (mm) 9 Type V belt A type Specification Double cog type Material (Belt) High transmission chloroprene rubber
- Mitsuboshi Belting Maxter Multi Wedge Belt 5V typeThe Maxter Multi Wedge Belt is a tie band that connects the top of the Maxter Wedge Belt. The cross-sectional shape of the belt is similar to the Maxter wedge belt. Even if the load on the prime mover or driven side fluctuates periodically, the belt length is uniform, so stable operation is possi... Read MoreBelt Height (mm) 13.5 Offset Angle (°) 40 Maximum Speed (m/sec) 40 Belt Shape 5V Material (Belt) Rubber Type Wedge belt
- Bando Chemical Industries Energy saving red (power saving type V belt) C typeIt saves about 3-6% power compared to standard V-belts. Since it can be mounted on the conventional standard V pulley as it is, power saving measures can be taken very economically. Unlike flat belts, there is no need to re-tension, and stable evangelism is possible for a long time. Compared to s... Read MoreBelt Height (mm) 13.5 Belt Top Width (mm) 22.2 RoHS directive (corresponding to 10 substances) Correspondence Material Rubber Type V-beltfrom S$78.99Min. 4 days
- Mitsuboshi Belting ULTRA e-POWER B typeULTRA e-POWER uses special core wire, special rubber, and special shape to achieve both high power saving effect and high transmission performance. The double cog shape improves flexibility and reduces bending loss during power transmission. In addition, chloroprene rubber improves deformation re... Read MoreBelt Height (mm) 11 Belt Top Width (mm) 16.5 Offset Angle (°) 40 Belt Shape B Specification Double cog type Material (Belt) High transmission chloroprene rubber Type V-belt
- Mitsuboshi Belting e-POWER V-belt wrapped notched type A typee-POWER has a notch shape and has excellent flexibility. Therefore, compared to the conventional V-belt, there is less power loss due to bending, and there is an energy saving effect. It has less power loss and can reduce power consumption by 6% compared to standard V-belts. Wrapped notched type ... Read MoreBelt Top Width (mm) 12.5 Offset Angle (°) 40 Belt Height (mm) 9 Belt Shape A Material (Belt) Rubber Type Wrapped notched type
- Mitsuboshi Belting e-POWER V-belt Low edge cog type CX typee-POWER has a cog shape and is excellent in flexibility. Therefore, compared to the conventional V-belt, there is less power loss due to bending, and there is an energy saving effect. It has less power loss and can reduce power consumption by 6% compared to standard V-belts. You can use it with a... Read MoreBelt Height (mm) 13.5 Belt Top Width (mm) 22.8 Offset Angle (°) 36 Belt Shape CX Type V-belt Material (Belt) Rubber
- Mitsuboshi Belting e-POWER V-belt wrapped notched type B typee-POWER has a notch shape and has excellent flexibility. Therefore, compared to the conventional V-belt, there is less power loss due to bending, and there is an energy saving effect. It has less power loss and can reduce power consumption by 6% compared to standard V-belts. Wrapped notched type ... Read MoreBelt Height (mm) 11 Belt Top Width (mm) 16.5 Offset Angle (°) 40 Belt Shape B Material (Belt) Rubber Type Wrapped notched typefrom S$59.99Min. 9 days
- Mitsuboshi Belting e-POWER V-belt wrapped notched type C typee-POWER has a notch shape and has excellent flexibility. Therefore, compared to the conventional V-belt, there is less power loss due to bending, and there is an energy saving effect. It has less power loss and can reduce power consumption by 6% compared to standard V-belts. Wrapped notched type ... Read MoreBelt Height (mm) 14 Belt Top Width (mm) 22 Offset Angle (°) 40 Belt Shape C Material (Belt) Rubber Type Wrapped notched typefrom S$78.99Min. 112 days
- DONGIL RUBBER BELT Narrow V-belt 8 V seriesIt has a special cross-sectional shape with a narrower upper width and a higher height than general belts. It is a belt that gives uniform stress to the tension body when the belt runs, depending on the raw material and manufacturing method, and enhances the transmission efficiency.Belt Height (mm) 22.2 Belt Top Width (mm) 25.4from S$149.90Min. 5 days
- Mitsuboshi Belting e-POWER wedge belt 5V typeYou can reduce power consumption. It has a notch shape and has excellent flexibility. Therefore, compared to standard wedge belts, there is less power loss due to bending and there is an energy saving effect. Conventional pulleys can be used. No special pulley is required, and power consumption c... Read MoreBelt Height (mm) 13.5 Belt Top Width (mm) 16 Offset Angle (°) 40 Belt Shape 5V Material (Belt) Rubber Type Wedge beltfrom S$239.90Min. 3 days
- GATES UNITTA ASIA Power grip EV belt EV5GT typeA high-strength belt with improved transmission capacity by improving the belt constituent materials. While maintaining the superiority of the new arc tooth profile and arc tooth profile, a significant increase in transmission capacity has been achieved by improving the material.Dimension PLD (mm) 0.5715 Belt Thickness (mm) 3.8 Cell Spacing (mm) 5 Type Standard Belt Shape EV5GT Material (Core Wire) Fiberglass cord Material (Main Unit) High modulus rubber Material (Tooth Cloth) Nylon canvasfrom S$16.99Min. 4 days
- Mitsuboshi Belting e-POWER wedge belt 8V typeYou can reduce power consumption. It has a notch shape and has excellent flexibility. Therefore, compared to standard wedge belts, there is less power loss due to bending and there is an energy saving effect. Conventional pulleys can be used. No special pulley is required, and power consumption c... Read MoreBelt Height (mm) 23 Belt Top Width (mm) 25.5 Offset Angle (°) 40 Belt Shape 8V Material (Belt) Rubber Type Wedge beltfrom S$269.90Min. 4 days
- Mitsuboshi Belting Maxter Multi Wedge Belt 8V typeThe Maxter Multi Wedge Belt is a tie band that connects the top of the Maxter Wedge Belt. The cross-sectional shape of the belt is similar to the Maxter wedge belt. Even if the load on the prime mover or driven side fluctuates periodically, the belt length is uniform, so stable operation is possi... Read MoreBelt Height (mm) 23 Maximum Speed (m/sec) 40 Offset Angle (°) 40 Belt Shape 8V Material (Belt) Rubber Type Wedge beltfrom S$479.90Min. 7 days
- Mitsuboshi Belting e-POWER V-belt wrapped notched type C typee-POWER has a notch shape and has excellent flexibility. Therefore, compared to the conventional V-belt, there is less power loss due to bending, and there is an energy saving effect. It has less power loss and can reduce power consumption by 6% compared to standard V-belts. Wrapped notched type ... Read MoreBelt Height (mm) 14 Belt Top Width (mm) 22 Offset Angle (°) 40 Belt Shape C Material (Belt) Rubber Type Wrapped notched typefrom S$99.90Min. 9 days
- ESCO BN96 Energy saving type V beltEsco Part No. EA967BN-96 Standard BN96 Effective Pitch Circumference (mm) 2438from S$139.90Min. 6 days
- ESCO AN91 Energy saving type V beltEffective Pitch Circumference (mm) 2311 Standard AN91 Esco Part No. EA967AN-91from S$78.99Min. 6 days
- ESCO AN31 Energy saving type V beltEffective Pitch Circumference (mm) 787 Esco Part No. EA967AN-31 Standard AN31from S$42.99Min. 6 days
- ESCO BN117 Energy saving type V beltEsco Part No. EA967BN-117 Effective Pitch Circumference (mm) 2972 Standard BN117from S$199.90Min. 6 days
- ESCO BN64 Energy saving type V beltEsco Part No. EA967BN-64 Standard BN64 Effective Pitch Circumference (mm) 1626from S$87.99Min. 6 days
- ESCO BN116 Energy saving type V beltEsco Part No. EA967BN-116 Effective Pitch Circumference (mm) 2946 Standard BN116from S$199.90Min. 6 days
- ESCO AN98 Energy saving type V beltStandard AN98 Esco Part No. EA967AN-98 Effective Pitch Circumference (mm) 2489from S$79.99Min. 6 days
- ESCO BN113 Energy saving type V beltEffective Pitch Circumference (mm) 2870 Standard BN113 Esco Part No. EA967BN-113from S$189.90Min. 6 days
- ESCO AN85 Energy saving type V beltEffective Pitch Circumference (mm) 2159 Standard AN85 Esco Part No. EA967AN-85from S$67.99Min. 6 days
- ESCO AN71 Energy saving type V beltEffective Pitch Circumference (mm) 1803 Esco Part No. EA967AN-71 Standard AN71from S$58.99Min. 6 days
- ESCO AN97 Energy saving type V beltEffective Pitch Circumference (mm) 2464 Esco Part No. EA967AN-97 Standard AN97from S$79.99Min. 6 days
- ESCO AN92 Energy saving type V beltEsco Part No. EA967AN-92 Effective Pitch Circumference (mm) 2337 Standard AN92from S$78.99Min. 6 days
