Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
It is a type that supports high loads by insert molding metal rings and steel bearings.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
RoHS directive (corresponding to 10 substances) Correspondence Screw Dimensions M6×1
Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
Dimension L (mm) 8(±0.5) RoHS directive (corresponding to 10 substances) Correspondence Screw Dimensions M6×1
High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect.
Guide roller, door roller, presser / steady roller.
Operating Temperature Range -20～80℃ Accuracy Class JIS B 1514 Class 0
It is a type that supports high loads by insert molding metal rings and steel bearings.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
It is a type that supports high loads by insert molding metal rings and steel bearings.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
Dimension L (mm) 11(±0.5) Dimension C (mm) 2.8(±0.4) Outer Diameter (Φmm) 22 Dimension D (mm) 22(±0.1) Dimension W (mm) 7 Width (mm) 7 Allowable load (N [kgf]) 784[80](300r.p.m) RoHS directive (corresponding to 10 substances) Correspondence Screw Dimensions M6×1
Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
Dimension L (mm) 11(±0.5) Allowable load (N [kgf]) 196[20](300r.p.m) Width (mm) 7 Dimension W (mm) 7(0～-0.2) Screw Dimensions M6×1
High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect.
Guide roller, door roller, presser / steady roller.
Operating Temperature Range -20～80℃ Accuracy Class JIS B 1514 Class 0
High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect.
Tension using guide rollers, doors (hanging doors), pulleys, and wires.
Operating Temperature Range -20～80℃ Flange Thickness (mm) 0.5 Dimension r (mm) 2.5 Screw Length (mm) 8 Accuracy Class JIS B 1514 Class 0 Screw Dimensions M6×1.00
Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect.
Tension using guide rollers, doors (hanging doors), pulleys, and wires.
Operating Temperature Range -20～80℃ Flange Thickness (mm) 0.5 Dimension r (mm) 2.5 Hex Hole Size Across Flats (mm) 2.5 Screw Length (mm) 8 Accuracy Class JIS B 1514 Class 0 Screw Dimensions M6×1.00
Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
Dimension C (mm) 0.5(±0.4) Dimension L (mm) 8(±0.5) RoHS directive (corresponding to 10 substances) Correspondence Screw Dimensions M6×1
High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect.
Guide roller, door roller, presser / steady roller.
Operating Temperature Range -20～80℃ Flange Thickness (mm) 1 Screw Length (mm) 8 Accuracy Class JIS B 1514 Class 0 Screw Dimensions M6×1.00
High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect.
Guide roller, door roller, presser / steady roller.
Operating Temperature Range -20～80℃ Dimension r (mm) 5 Screw Length (mm) 8 Accuracy Class JIS B 1514 Class 0 Screw Dimensions M6×1.00
Drawers for desks, cabinets, vending machines, refrigerators, etc.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
Dimension C (mm) 0.5(±0.4) Outer Diameter (Φmm) 19 Dimension D (mm) 19(-0.1～0) Width (mm) 6 Dimension W (mm) 6(-0.2～0) Dimension L (mm) 8(±0.5) RoHS directive (corresponding to 10 substances) Correspondence Screw Dimensions M6×1
Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race.
Drawers for desks, cabinets, vending machines, refrigerators, etc.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
Dimension C (mm) 0.5(±0.4) Dimension L (mm) 8(±0.5) Screw Dimensions M6×1
High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect.
Tension using doors, pulleys and wires.
Operating Temperature Range -20～80℃ Flange Thickness (mm) 0.5 Dimension r (mm) 0.6 Angle M (°) 60 Screw Length (mm) 8 Accuracy Class JIS B 1514 Class 0 Screw Dimensions M6×1.00
High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect.
Tension using doors, pulleys and wires.
Operating Temperature Range -20～80℃ Flange Thickness (mm) 0.5 Dimension r (mm) 0.6 Hex Hole Size Across Flats (mm) 2.5 Angle M (°) 60 Screw Length (mm) 8 Accuracy Class JIS B 1514 Class 0 Screw Dimensions M6×1.00
By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out.
Transport guide wire pulley, etc.
* Be careful... Read More
Flange Thickness (mm) 0.5 Dimension R (mm) 0.6 Operating Temperature Range (℃) 0～40 Angle M (°) 60 Width (mm) 7 Screw Length (mm) 8 Hexagon socket B (mm) Call 4 Screw Dimensions Roller: M6
By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out.
Transport guide, etc.
* Be careful not to apply a load in the axial direction.
By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out.
Transport guide etc.
* Be careful not to apply... Read More
Flange Thickness (mm) 0.5 Operating Temperature Range (℃) 0～40 Width (mm) 7 Screw Length (mm) 8 Hexagon socket B (mm) Call 4 load (N) Estimated: 196 Screw Dimensions Roller: M6
By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out. By using conductive resin and conductive greas... Read More
Flange Thickness (mm) 0.5 Operating Temperature Range (℃) 0～40 Width (mm) 7 Screw Length (mm) 8 Hexagon socket B (mm) Call 4 Screw Dimensions Roller: M6
By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out.
Transport guide, etc.
* Be careful not to appl... Read More
Flange Thickness (mm) 0.5 Operating Temperature Range (℃) 0～40 Trusco Part No. 116-5031 Dimension D1 (mm) 19 Dimension G (mm) 2 Outer Diameter (mm) 22 Width (mm) 7 Screw Length (mm) 8 Mass (g) 9 Hexagon socket B (mm) Call 4 Screw Dimensions Roller: M6
By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out.
Transport guide pulley, etc.
* Be careful not ... Read More
Flange Thickness (mm) 0.5 Operating Temperature Range (℃) 0～40 Width (mm) 7 Screw Length (mm) 8 Hexagon socket B (mm) Call 4 Screw Dimensions Roller: M6
Plastic bearings made of polyacetal resin (POM) for the outer race and steel for the balls and inner race.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
Plastic bearings made of polyacetal resin (POM) for the outer race and steel for the balls and inner race.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out.
Transport guide, etc.
* Be careful not to appl... Read More
Flange Thickness (mm) 0.5 Operating Temperature Range (℃) 0～40 Trusco Part No. 116-5031 Dimension D1 (mm) 19 Dimension G (mm) 2 Outer Diameter (mm) 22 Width (mm) 7 Screw Length (mm) 8 Mass (g) 9 Hexagon socket B (mm) Call 4 Screw Dimensions Roller: M6
By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out.
Transport guide pulley, etc.
* Be careful not ... Read More
Flange Thickness (mm) 0.5 Operating Temperature Range (℃) 0～40 Width (mm) 7 Screw Length (mm) 8 Hexagon socket B (mm) Call 4 Screw Dimensions Roller: M6
Plastic bearings made of polyacetal resin (POM) for the outer race and steel for the balls and inner race.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
Plastic bearings made of polyacetal resin (POM) for the outer race and steel for the balls and inner race.
* The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out.
Transport guide wire pulley, etc.
* Be careful... Read More
Flange Thickness (mm) 0.5 Dimension R (mm) 0.6 Operating Temperature Range (℃) 0～40 Angle M (°) 60 Width (mm) 7 Screw Length (mm) 8 Hexagon socket B (mm) Call 4 Screw Dimensions Roller: M6
TOK Bearing Resin Bearing DR-B (Thread Shaft PLANE Type) TYPE7Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race. Drawers for desks, cabinets, vending machines, refrigerators, etc. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.Screw Dimensions M6×1
