A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read More
Length of movement (knob 1 rotation)about18mm Parallelism (mm) 0.06, parallelism of movement: 0.05 Sensitivity 0.1mm Mass (kg) 0.4 Load capacity (N) 39.2 table length (mm) 40 table width (mm) 90 Moving guide Ant groove RoHS directive (corresponding to 10 substances) Correspondence Clamp Lever type Operation position One handle Moment rigidity (sec / N.cm) Pitch rigidity: 0.5, roll rigidity: 0.2 Feed method Rack-and-pinion Movement accuracy (mm) Straightness 0.03 Scale Vernier reading 0.1mm Direction of movement X axis 1 direction Type X stage Stroke (X distance) (mm) ±30
The normal miniature stage has the drawback of being loose or spring-loaded and squeaky, but the front lock stage is a miniature size with no backlash, achieving extremely smooth and smooth sliding. In addition, it is equipped with a stopper function that can be fixed at the base of the handle as... Read More
Handle rotational moving amount (mm) 0.5 Minimum Reading (Scale Interval) (mm) 1 table length (mm) 25 table width (mm) 25 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized
We have a lineup of 4 models depending on the distance traveled. An epoch-making lead screw type stage that allows you to select the amount of movement for one rotation of the handle from 2 mm, 5 mm, and 10 mm, respectively, according to the intended use. A visually easy-to-read center-sorting co... Read More
Minimum Reading (Scale Interval) (mm) 0.1 table length (mm) 25 Load capacity (N) 29.4 table width (mm) 40 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type X stage
The all-resin skeleton stage cannot be handled with metal because it is heavy with the conventional metal dovetail stage, and there is a risk of gas generation due to alumite treatment and impurities mixed in the grease, causing sliding defects. A slide unit that is ideal for various uses.
As a s... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Mass (kg) 0.11 Handle rotational moving amount (mm) 18 Load capacity (N) 19.6 table length (mm) 40 table width (mm) 60 Material (Main Unit) Acrylic / Polycarbonate / Polyacetal Moving guide Ant groove Feed method Rack-and-pinion Type X stage Stroke (X distance) (mm) ±21
It is a type without a base plate of the moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can b... Read More
Minimum Reading (mm) 0.1 Sensitivity 0.1mm Load capacity (N) 39.2(4kgf) Material Aluminum alloy Moving guide Ant Surface Treatment Black alumite pear Clamp Lever type Feed method Movement mechanism: Rack and pinion type Location to Install Operation part: One handle Movement accuracy (mm) Straightness 0.03 Direction of movement X axis 1 direction Type x stage
It is a stage that uses aluminum alloy as the main material and has both rigidity and light weight. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces.
For precision positioning of cameras, sensors, workpieces, etc.
Straightness (μm) 2 Parallelism (μm) When exercising: 10 Type X stage Movement distance (mm) ±6.5
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type X stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 4.2 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type X stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type X stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Mass (kg) 0.837 Load capacity (N) 17.15 Handle rotational moving amount (mm) 4.2 table length (mm) 40 table width (mm) 80 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type X stage Stroke (X distance) (mm) ±30
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Load capacity (N) 34.3 table length (mm) 40 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type X stage
A thin and lightweight elevating Z-axis stage. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces.
Movement distance (mm) 0 to 10, knob 1 rotation: 0.5 Sensitivity 0.003mm Mass (kg) 0.4 Load capacity (N) 49(5kgf) Stage dimensions (mm) 90×90 Material Aluminum alloy Surface Treatment Black alumite pear Minimum Reading (mm) Micrometer type: 0.01 Clamp Plate clamp Direction of movement Z axis 1 direction Type z stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 4.2 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type X stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 4.2 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type X stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 4.2 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type X stage
This is a new product that uses the adsorption of magnets. We have achieved an amazing thinness of 8 mm that has never been seen before. It is a low-priced product with a different structure from the conventional product. It is a product that does not contain 10 RoHS regulated substances.
Surface Treatment Black chromium oxide Clamp Plate clamp Material Steel Moving guide V groove and steel ball Type x stage Movement distance (mm) ±6.5
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type X stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type X stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 4.2 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type X stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type X stage
This is a new product that uses the adsorption of magnets. We have achieved an amazing thinness of 8 mm that has never been seen before. It is a low-priced product with a different structure from the conventional product. It is a RoHS directive compliant product.
* Since this product uses permane... Read More
Material / Processing (Table) Steel / Black Chrome Oxide Mass (kg) 0.09 table width (mm) 40 table length (mm) 40 Table Height (mm) 8 Load capacity (N) 98 Clamp Plate clamp Moving guide V groove rail and steel ball Direction of movement X axis 1 direction Type X stage Operation position side Stroke (X distance) (mm) ±6.5
CHUO PRECISION INDUSTRIAL DT X-axis stage 40 × 90A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read MoreLength of movement (knob 1 rotation)about18mm Parallelism (mm) 0.06, parallelism of movement: 0.05 Sensitivity 0.1mm Mass (kg) 0.4 Load capacity (N) 39.2 table length (mm) 40 table width (mm) 90 Moving guide Ant groove RoHS directive (corresponding to 10 substances) Correspondence Clamp Lever type Operation position One handle Moment rigidity (sec / N.cm) Pitch rigidity: 0.5, roll rigidity: 0.2 Feed method Rack-and-pinion Movement accuracy (mm) Straightness 0.03 Scale Vernier reading 0.1mm Direction of movement X axis 1 direction Type X stage Stroke (X distance) (mm) ±30
