A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read More
Length of movement (knob 1 rotation)about18mm Sensitivity 0.1mm Mass (kg) 0.72 Load capacity (N) 39.2 table length (mm) 40 table width (mm) 90 Moving guide Ant groove RoHS directive (corresponding to 10 substances) Correspondence Clamp Lever type Operation position One handle Feed method Rack-and-pinion Movement accuracy (mm) Straightness 0.03 Scale Vernier reading 0.1mm Direction of movement XY axis 2 directions Type xy stage Stroke (Y distance) (mm) ±30 Stroke (X distance) (mm) ±30
Long stroke movement in the Z-axis and X-axis directions is possible. The drive system is a screw feed type (pitch 2 mm) with a large handle. It can be connected to a 50 mm / 2 inch pitch optical surface plate, etc.
It is a moving unit that uses a dovetail groove for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. The base plate is sold separately.
For positioning ca... Read More
Straightness (mm) 0.05 Moving guide Ant groove Load capacity (N) Horizontal: 39.2 Material / Finish Main material: Aluminum alloy Feed method Rack and pinion type Type XY stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type xy stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 4.2 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type xy stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type xy stage
It is a stage that uses aluminum alloy as the main material and has both rigidity and light weight. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces.
For precision positioning of cameras, sensors, workpieces, etc.
Straightness (μm) 2 Parallelism (μm) When exercising: 20 Type XY stage Movement distance (mm) ±6.5
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type xy stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 4.2 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type xy stage
This is a new product that uses the adsorption of magnets. We have achieved an amazing thinness of 8 mm that has never been seen before. It is a low-priced product with a different structure from the conventional product. It is a product that does not contain 10 RoHS regulated substances.
Surface Treatment Black chromium oxide Clamp Plate clamp Material Steel Moving guide V groove and steel ball Type xy stage Movement distance (mm) ±6.5
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Load capacity (N) 29.4 table length (mm) 40 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type xy stage
It is a stage that has both flexibility and operability, such as a stage surface with a different shape on the front and back, rearrangement of the scale plate and clamp lever on the front, back, left and right, and bidirectional (XY) sliding on one axis. It is also very convenient for applicatio... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Mass (kg) 0.62 Load capacity (N) 39.2 table length (mm) 60 table width (mm) 60 Moving guide Ant groove Feed method Lead screw/rack & pinion Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Handle rotational moving amount (mm) X-axis 18, Y-axis 4.2 Type xy stage Stroke (Y distance) (mm) ±12 Stroke (X distance) (mm) ±12
XY 300mm each movable. A combination of manual slide type + screw type 1 rotation 2 mm fine adjustment for quick adjustment. Ideal for aligning large materials.
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 4.2 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type xy stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 4.2 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type xy stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type xy stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 4.2 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type xy stage
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Mass (kg) 1.054 Load capacity (N) 17.15 Handle rotational moving amount (mm) 4.2 table length (mm) 40 table width (mm) 80 Moving guide Ant groove Feed method Lead screw Material (Main Unit) Made of aluminum alloy Surface Treatment (Main Unit) Satin treated anodized Type xy stage Stroke (X distance) (mm) ±30 Stroke (Y distance) (mm) ±30
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Minimum Reading (Scale Interval) (mm) 0.1 Handle rotational moving amount (mm) 18 Moving guide Ant groove Material (Main Unit) Made of aluminum alloy Feed method Rack-and-pinion Surface Treatment (Main Unit) Satin treated anodized Type xy stage
A screw feed stage suitable for fine adjustment applications due to the dovetail groove guide and screw feed adjustment method.
* Depending on the parts fixing the feed screw and handle and the type of micrometer head, it may protrude from the top of the stage. * Please note that depending on the... Read More
Mass (kg) 0.4 Thread Pitch (mm) 0.5 Moment rigidity (sec / N.cm) 1.5 (pitching), 1.5 (rolling) Parallelism (μm) 100 Load capacity (N) 68.7 Moving guide Ant method Material Brass Surface Treatment Super black chrome Axis XY axis Specification [Movement accuracy / straightness] 20 Movement distance (mm) ±4
It is a 125mm x 125mmm transmissive XY stage. There is a Φ50mm through hole in the center. It is thinner and lighter than the normal XY stage because it has three layers, the lower stage, the middle stage, and the upper stage.
XY orthogonality (mm) 0.05 Parallelism (mm) 0.1 Mass (kg) 1.3 Stage dimensions (mm) 125×125 Load capacity (N) 78.4(8kgf) Material Aluminum alloy Surface Treatment Black alumite pear Minimum Reading (mm) Micrometer type 0.01 Location to Install Operation unit: Center Clamp Plate clamp Moving guide V groove and cross roller Type xy stage
Kenko stage* Can be used in combination with the Φ100 black and white stage of the stand KS-20.table length (mm) 100 table width (mm) 100 Feed method Lead screw Type xy stage Stroke (X distance) (mm) ±35 Stroke (Y distance) (mm) ±35from S$599.90Min. 2 days
