PRICE DOWN
Toggle Nav
My Cart
Search
Advanced Search
All Category
All Category
Menu
Account

Locating Pins

Other Related Pages

  1. wooden dowel pins
  2. 12mm dowel pins
View : Grid List
Filter

Items 1 - 40 of 66

Page
Set Ascending Direction
  1. Dowel Pin Type A
    Ohkita Dowel Pin Type A
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  +0.005～+0.010  RoHS directive (corresponding to 10 substances)  Correspondence  Hardness  HRC58～62  Material  SCM445 
    Rating:
    96%
    (11)
    from S$0.25
    Min. 2 days
  2. Back shot pin BSP
    CHAMPION CORPORATION Back shot pin BSP
    Dimension J (mm)  10  Dimension H (mm)  120  Hardness  58～60HRC  RoHS directive (corresponding to 10 substances)  Correspondence  Material  SCM415 
    from S$73.99
    Min. 5 days
  3. Dowel pin type C
    Ohkita Dowel pin type C
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  0～-0.005  Hardness  HRC58～62  Material  SCM445 
    Rating:
    100%
    (5)
    from S$0.25
    Min. 2 days
  4. Super Shaft (Tolerance h7)
    KSSC Super Shaft (Tolerance h7)
    This standard is a standardized product with reference to JIS B 1354 parallel pins.
    Material  SUS304 
    Rating:
    90%
    (2)
    from S$23.99
    Min. 2 days
  5. Dowel Pin E Type with Internal Thread (with Straight Groove)
    Ohkita Dowel Pin E Type with Internal Thread (with Straight Groove)
    Uses chromoly steel with excellent toughness. It has an internal screw for pulling out and a straight groove for bleeding air. Mainly used for positioning molds, jigs, etc.
    RoHS directive (corresponding to 10 substances)  Correspondence  Hardness  HRC58～62  Material  SCM445  Tolerance  m5 
    Rating:
    100%
    (3)
    from S$1.19
    Min. 2 days
  6. Knock outer (without knock pin)
    Ohkita Knock outer (without knock pin)
    A tool for pulling out dowel pins, parallel pins, taper pins, etc. with internal threads. It's powerful. By replacing the holder cap at the tip and the hexagon socket head cap screw, it is possible to handle screw diameters from M4 to M10. The workability is good, and the key points are harde... Read More
    Surface Treatment  Black dyed  RoHS directive (corresponding to 10 substances)  Correspondence  Hardness  HRC38～42  Material  S45C 
    Rating:
    77%
    (6)
    from S$269.90
    Min. 2 days
  7. Dowel Pin Type B
    Ohkita Dowel Pin Type B
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  0～+0.005  Hardness  HRC58～62  Material  SCM445 
    Rating:
    100%
    (4)
    from S$0.25
    Min. 2 days
  8. Super shaft (tolerance m6)
    KSSC Super shaft (tolerance m6)
    This standard is a standardized product with reference to JIS B 1354 parallel pins.
    Material  SUS304 
    Rating:
    100%
    (2)
    from S$29.99
    Min. 13 days
  9. Dowel pin with internal thread (TPMDP) (iron / fabric)
    Osaka Spirit Dowel pin with internal thread (TPMDP) (iron / fabric)
    Material  Iron  Surface Treatment  Phosphate 
    from S$4.29
    Min. 2 days
  10. Dowel pin A type (iron / fabric) (packed product)
    Osaka Spirit Dowel pin A type (iron / fabric) (packed product)
    Surface Treatment  Phosphate 
    from S$5.69
    Min. 3 days
  11. Dowel Pin C Type with Internal Thread (with Spiral Groove)
    Ohkita Dowel Pin C Type with Internal Thread (with Spiral Groove)
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  0～-0.005  RoHS directive (corresponding to 10 substances)  Correspondence  Hardness  HRC58～62  Material  SCM445 
    from S$1.59
    Min. 5 days
  12. Dowel pin A type with internal thread (with spiral groove)
    Ohkita Dowel pin A type with internal thread (with spiral groove)
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. It has an internal screw for pulling out and a spiral groove for air bleeding. Mainly used for positioning molds, jigs, etc.
    Tolerance  +0.005～+0.010  RoHS directive (corresponding to 10 substances)  Correspondence  Hardness  HRC58～62  Material  SCM445 
    Rating:
    100%
    (1)
    from S$1.49
    Min. 5 days
  13. Dowel pin B type with internal thread (with spiral groove)
    Ohkita Dowel pin B type with internal thread (with spiral groove)
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  0～+0.005  RoHS directive (corresponding to 10 substances)  Correspondence  Hardness  HRC58～62  Material  SCM445 
    Rating:
    100%
    (1)
    from S$1.59
    Min. 4 days
  14. Shaft Tolerance h7 B Type
    Accurate Shaft Tolerance h7 B Type
    Jig positioning pins, etc.
    Surface Roughness (S)  1 or less  Hardness (Hv)  300 or more  Material  SUS304(JIS G 4303) 
    from S$22.99
    Min. 5 days
  15. Runner lock pin RLPC
    CHAMPION CORPORATION Runner lock pin RLPC
    RoHS directive (corresponding to 10 substances)  Correspondence  Hardness  Induction hardening, 58-60HRC  Material  SK3 
    Rating:
    40%
    (1)
    from S$6.79
    Min. 2 days
  16. SPM stop pin
    NBK (Nabeya Bi-tech Kaisha) SPM stop pin
    from S$6.79
    Min. 2 days
  17. Shaft tolerance m6 A type
    Accurate Shaft tolerance m6 A type
    Jig positioning pins, etc.
    Surface Roughness (S)  1 or less  Hardness (Hv)  300 or more  Material  SUS304(JIS G 4303) 
    from S$22.99
    Min. 5 days
  18. Runner lock pin RLPN
    CHAMPION CORPORATION Runner lock pin RLPN
    RoHS directive (corresponding to 10 substances)  Correspondence  Hardness  Induction hardening, 58-60HRC  Material  SK3 
    from S$6.79
    Min. 5 days
  19. Stop pin STP
    CHAMPION CORPORATION Stop pin STP
    Dimension L (mm)  15(+0.07～0)  Dimension T (mm)  5(+0.025～+0.010)  Dimension D (Φmm)  8(+0.024～+0.015)  RoHS directive (corresponding to 10 substances)  Correspondence  Material  S45C 
    from S$1.99
    Min. 5 days
  20. Interlock pin ILP
    CHAMPION CORPORATION Interlock pin ILP
    Hardness  58～60HRC  RoHS directive (corresponding to 10 substances)  Correspondence  Material  SKS3 
    from S$129.90
    Min. 5 days
  21. Dowel Pin (DP ・ m6) (Iron / Fabric) (Small Box)
    Himeno Precision Works Dowel Pin (DP ・ m6) (Iron / Fabric) (Small Box)
    Material  Iron  Surface Treatment  Phosphate 
    from S$86.99
    Min. 3 days
  22. Dowel Pin DP / H7 (Iron / Fabric) (Packed Product)
    No Brand Dowel Pin DP / H7 (Iron / Fabric) (Packed Product)
    Material  Iron  Surface Treatment  Phosphate 
    from S$6.19
    Min. 4 days
  23. Dowel pin with internal thread MDP (iron)
    No Brand Dowel pin with internal thread MDP (iron)
    Material  Iron 
    from S$4.69
    Min. 4 days
  24. Runner Lock Pin (Hard Rock/Straight)
    TRUSCO Runner Lock Pin (Hard Rock/Straight)
    Used to separate the runner from the molded product and take it out. As a part of a plastic mold.
    from S$6.19
    Min. 2 days
  25. Internal Thread Dowel Pins (TMDP) (Iron / Plain)
    No Brand Internal Thread Dowel Pins (TMDP) (Iron / Plain)
    Material  Iron  Surface Treatment  Phosphate 
    from S$4.69
    Min. 4 days
  26. Dowel Pin DP ・ m6 (Iron / Fabric)
    No Brand Dowel Pin DP ・ m6 (Iron / Fabric)
    Material  Iron  Surface Treatment  Phosphate 
    from S$4.69
    Min. 4 days
  27. Dowel Pin DP /m6 (Iron / Fabric) (Packed Product)
    No Brand Dowel Pin DP /m6 (Iron / Fabric) (Packed Product)
    Material  Iron  Surface Treatment  Phosphate 
    from S$6.19
    Min. 4 days
  28. With dowel pin air vent groove
    NABEYA With dowel pin air vent groove
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$9.29
    Min. 4 days
  29. Dowel pin with internal thread (THMDP) (iron / fabric)
    No Brand Dowel pin with internal thread (THMDP) (iron / fabric)
    Material  Iron  Surface Treatment  Phosphate 
    from S$4.69
    Min. 4 days
  30. Loser stop pin
    Prym Loser stop pin
    Overall Length (mm)  About 30  Dimension L (mm)  About 30 
    from S$5.69
    Min. 5 days
  31. Runner lock pin fixing collar
    TRUSCO Runner lock pin fixing collar
    Used as a runner lock pin spacer. As a part of a plastic mold.
    from S$2.49
    Min. 2 days
  32. Dowel Pin (DP ・ h7) (Iron / Fabric) (Small Box)
    Himeno Precision Works Dowel Pin (DP ・ h7) (Iron / Fabric) (Small Box)
    Material  Iron  Surface Treatment  Phosphate 
    from S$58.99
    Min. 3 days
  33. Dowel pin with internal thread (MDP) (iron / fabric) (small box)
    Himeno Precision Works Dowel pin with internal thread (MDP) (iron / fabric) (small box)
    Material  Iron  Surface Treatment  Phosphate 
    from S$84.99
    Min. 3 days
  34. Dowel pin with internal screw (TPMD) (iron / fabric) (small box)
    No Brand Dowel pin with internal screw (TPMD) (iron / fabric) (small box)
    Material  Iron  Surface Treatment  Phosphate 
    from S$139.90
    Min. 4 days
  35. Dowel Pin DP ・ h7 (Iron / Fabric) (Small Box)
    No Brand Dowel Pin DP ・ h7 (Iron / Fabric) (Small Box)
    Material  Iron  Surface Treatment  Phosphate 
    from S$46.99
    Min. 4 days
  36. Dowel pin with internal thread (TMMDP) (iron / fabric)
    No Brand Dowel pin with internal thread (TMMDP) (iron / fabric)
    Material  Iron  Surface Treatment  Phosphate 
    from S$4.69
    Min. 4 days
  37. Dowel pin B type (iron / fabric) (small box)
    No Brand Dowel pin B type (iron / fabric) (small box)
    Material  Iron  Surface Treatment  Phosphate 
    from S$38.99
    Min. 13 days
  38. Dowel pin B type (iron / fabric) (packed product)
    No Brand Dowel pin B type (iron / fabric) (packed product)
    Surface Treatment  Phosphate 
    from S$6.19
    Min. 4 days
  39. Loser stop pin twist
    Prym Loser stop pin twist
    Dimension L (mm)  13  Overall Length (mm)  13 
    from S$7.69
    Min. 5 days
  40. Runner Lock Pin (Normal/Straight)
    TRUSCO Runner Lock Pin (Normal/Straight)
    Used to separate the runner from the molded product and take it out. Normal straight type As a part of a plastic mold.
    from S$6.19
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 66

Page
Set Ascending Direction