All Category

Toggle Clamps

Toggle clamps are devices that press down by moving the handle. It is used as a jig and fixture, and is used in a wide range of fields, including automobiles, shipbuilding, and general machinery manufacturing. Since there are horizontal and vertical directions of the handle and the direction of pressing, select according to the direction you want to press. In addition, since the tightening pressure is large and small, select the strength according to the situation. If it is difficult to press down directly with metal bolts, it is safe to choose a type that has a rubber pad attached to the clamp bolt.
View : Grid List
Filter

Items 1 - 40 of 303

Set Ascending Direction
  1. Vertical Toggle Clamp
    MonotaRO Vertical Toggle Clamp
    Downward pressure type toggle clamp. The push position can be adjusted with the bolt and nut at the tip. For various fixing and temporary holding of metal and wood. * Do not use for anything other than its intended purpose.
    Type  Downward pressure type  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome) 
    Rating:
    83%
    from S$9.79
    Min. 2 days
  2. Side push type toggle clamp
    MonotaRO Side push type toggle clamp
    * Do not use for anything other than its intended purpose.
    Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Type  Side push type 
    Rating:
    83%
    from S$17.99
    Min. 2 days
  3. Push Type Toggle Clamp
    KAKUTA Push Type Toggle Clamp
    Side-push type toggle clamp. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. Can also be used for woodworking and DIY. The tightening pressure shown is a guide. Impact, vibration, and internal pressure may cause damage. Be careful not to get your hands caught.
    Rating:
    92%
    from S$26.99
    Min. 2 days
  4. Hold Down Handle Horizontal Toggle Clamp
    KAKUTA Hold Down Handle Horizontal Toggle Clamp
    Highly versatile downward presser type toggle clamp. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. Can also be used for woodworking and DIY. The tightening pressure shown is a guide. The tightening pressure becomes weaker toward the tip of the clamp arm. Pleas... Read More
    Rating:
    100%
    from S$22.99
    Min. 2 days
  5. Vertical Toggle Clamp 200K
    MonotaRO Vertical Toggle Clamp 200K
    * Do not use for anything other than its intended purpose.
    Maximum Height (mm)  140  Maximum Length (mm)  173.3  Clamping Pressure (kN [kgf])  2.0[200]  Mass (g)  370  Handle Operation Angle (°)  54  Clamp Arm Movement Angle (°)  94  Type  Down pressure type  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Included Accessories  Spindle (M8 × 50 P = 1.25)  Spindle  Spindle (M8 × 50 P = 1.25) 
    Rating:
    89%
    from S$15.99
    Min. 2 days
  6. Downward holding type toggle clamp 50K
    MonotaRO Downward holding type toggle clamp 50K
    * Do not use for anything other than its intended purpose.
    Clamping Pressure (kN [kgf])  0.5[50]  Clamp Arm Movement Angle (°)  100  Handle Operation Angle (°)  56  Mass (g)  60  Maximum Height (mm)  74.4  Maximum Length (mm)  92.6  Type  Downward holding type  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Spindle  Spindle M5 × 37 P = 0.8 
    Rating:
    98%
    from S$9.19
    Min. 2 days
  7. Rubber bolt for toggle clamp
    KAKUTA Rubber bolt for toggle clamp
    Material (Rubber)  NBR (Nitrile Rubber)  Rubber hardness  Shore 70 degrees 
    Rating:
    100%
    from S$4.99
    Min. 2 days
  8. Side push type toggle clamp
    IKURA SEIKI Side push type toggle clamp
    Rating:
    80%
    from S$14.99
    Min. 2 days
  9. Vertical Type Toggle Clamp (Horizontal Handle Type)
    SUPER TOOL Vertical Type Toggle Clamp (Horizontal Handle Type)
    Rating:
    97%
    from S$11.99
    Min. 2 days
  10. Vertical Toggle Clamp (Round Grip)
    MonotaRO Vertical Toggle Clamp (Round Grip)
    * Do not use for anything other than its intended purpose.
    Type  Downward holding type  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome) 
    Rating:
    94%
    from S$15.99
    Min. 2 days
  11. Horizontal toggle clamp
    IMAO Horizontal toggle clamp
    Material (pad)  Chloroprene rubber (CR)  Material (Grip)  PVC  Material (Nut)  SPCC  Material (Main Unit)  SPCC  Material (Bolt)  SUM41 
    Rating:
    80%
    from S$8.79
    Min. 2 days
  12. Hold Down Handle Vertical Toggle Clamp
    KAKUTA Hold Down Handle Vertical Toggle Clamp
    Highly versatile downward presser type toggle clamp. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. Can also be used for woodworking and DIY. The tightening pressure shown is a guide. The tightening pressure becomes weaker toward the tip of the clamp arm. Pleas... Read More
    from S$26.99
    Min. 2 days
  13. Vertical Toggle Clamp Hold Down Handle
    IKURA SEIKI Vertical Toggle Clamp Hold Down Handle
    Rating:
    60%
    from S$12.99
    Min. 2 days
  14. Downward press type toggle clamp 100K
    MonotaRO Downward press type toggle clamp 100K
    * Do not use for anything other than its intended purpose.
    Clamping Pressure (kN [kgf])  1.0[100]  Maximum Height (mm)  111  Clamp Arm Movement Angle (°)  120  Maximum Length (mm)  134.7  Mass (g)  200  Handle Operation Angle (°)  72  Type  Down pressure type  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Spindle  Spindle (M6 × 40 P = 1.0)  Included Accessories  Spindle (M6 × 40 P = 1.0) 
    Rating:
    80%
    from S$10.99
    Min. 2 days
  15. Hook type toggle clamp
    MonotaRO Hook type toggle clamp
    * Do not use for anything other than its intended purpose.
    Mass (g)  209  Maximum Length (mm)  220.2  Clamping Pressure (kN [kgf])  3.18[318]  Maximum Height (mm)  42.3  Stroke (mm)  45  Base  Flange  Type  Hook type  Included Accessories  Nut M5 P = 0.8  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome) 
    Rating:
    100%
    from S$16.99
    Min. 2 days
  16. Bolt / Nut (with Rubber Head)
    SUPER TOOL Bolt / Nut (with Rubber Head)
    Toggle clamp parts * TNG0422 has one nut. One of the nuts of TNG0425, TNG0442, and TNG0425 is a square nut.
    from S$3.39
    Min. 2 days
  17. Side Toggle Clamp
    MonotaRO Side Toggle Clamp
    Side-push type toggle clamp. The push position can be adjusted with the bolt and nut at the tip. For various fixing and temporary holding of metal and wood. * Do not use for anything other than its intended purpose.
    Clamping Pressure (kN [kgf])  0.5[50]  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Type  Side push type 
    Rating:
    84%
    from S$12.99
    Min. 2 days
  18. Pull type toggle clamp
    IMAO Pull type toggle clamp
    Material (Grip)  PVC  Material (Main Unit)  SPCC(ST-PAH341:SPHD)  Material (U bolt)  SUM41 
    Rating:
    80%
    from S$13.99
    Min. 2 days
  19. Hold Down Handle Vertical Toggle Clamp
    KAKUTA Hold Down Handle Vertical Toggle Clamp
    Small downward presser type toggle clamp. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. Can also be used for woodworking and DIY. The tightening pressure shown is a guide. The tightening pressure becomes weaker toward the tip of the clamp arm. Please note that... Read More
    Rating:
    90%
    from S$22.99
    Min. 2 days
  20. Downward holding type toggle clamp 280K
    MonotaRO Downward holding type toggle clamp 280K
    * Do not use for anything other than its intended purpose.
    Maximum Height (mm)  193.8  Clamping Pressure (kN [kgf])  2.8[280]  Maximum Length (mm)  260.3  Mass (g)  435  Clamp Arm Movement Angle (°)  79  Handle Operation Angle (°)  87  Type  Downward holding type  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Spindle  Spindle M8 × 65 P = 1.25 
    Rating:
    90%
    from S$17.99
    Min. 2 days
  21. Toggle Clamp Rubber Bolt
    IKURA SEIKI Toggle Clamp Rubber Bolt
    * A set of rubber bolts and nuts. * M4 nuts are 1 hexagon and 1 square. * When using rubber bolts, the tightening pressure is lower than that of normal bolts.
    Rating:
    80%
    from S$4.69
    Min. 2 days
  22. Side push type toggle clamp
    SUPER TOOL Side push type toggle clamp
    Material (Main Unit)  Iron 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  23. Toggle Clamp Side Press Type
    SUPER TOOL Toggle Clamp Side Press Type
    Stainless steel is used for the caulking pins of all models to support long-term use. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. * The listed bearing capacity is displayed as the highest value. Please note that the value will decrease depending on the push ... Read More
    Rating:
    92%
    from S$13.99
    Min. 2 days
  24. Rubber Cap 6893
    NABEYA Rubber Cap 6893
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$6.99
    Min. 2 days
  25. Pull Type Clamp
    KAKUTA Pull Type Clamp
    Hook type toggle clamp. Clamp by hooking a fixed object with a U-shaped hook type bar. Machine parts Can be used as equipment parts. The tightening pressure shown is a guide. Impact, vibration, and internal pressure may cause damage. Be careful not to get your hands caught.
    from S$33.99
    Min. 2 days
  26. Vertical Toggle Clamp (Hold Down Handle)
    SUPER TOOL Vertical Toggle Clamp (Hold Down Handle)
    Rating:
    80%
    from S$13.99
    Min. 2 days
  27. Lower presser type toggle clamp Horizontal handle
    IKURA SEIKI Lower presser type toggle clamp Horizontal handle
    Rating:
    100%
    from S$13.99
    Min. 2 days
  28. Downward holding type toggle clamp 91K
    MonotaRO Downward holding type toggle clamp 91K
    * Do not use for anything other than its intended purpose.
    Clamping Pressure (kN [kgf])  0.91[91]  Maximum Height (mm)  104  Maximum Length (mm)  119.7  Mass (g)  159  Handle Operation Angle (°)  60  Clamp Arm Movement Angle (°)  95  Type  Downward holding type  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Spindle  Spindle M6 × 44 P = 1.0 
    Rating:
    100%
    from S$10.99
    Min. 2 days
  29. Push / Pull Type Toggle Clamp
    SUPER TOOL Push / Pull Type Toggle Clamp
    Rating:
    100%
    from S$12.99
    Min. 2 days
  30. Downward pressing toggle clamp 250K
    MonotaRO Downward pressing toggle clamp 250K
    * Do not use for anything other than its intended purpose.
    Maximum Height (mm)  167.6  Mass (g)  190  Maximum Length (mm)  199  Clamping Pressure (kN [kgf])  2.5[250]  Clamp Arm Movement Angle (°)  77  Handle Operation Angle (°)  85  Type  Down pressure type  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Included Accessories  Spindle (M6 × 50 P = 1.0)  Spindle  Spindle (M6 × 50 P = 1.0) 
    Rating:
    100%
    from S$15.99
    Min. 2 days
  31. Downward holding type toggle clamp 500K
    MonotaRO Downward holding type toggle clamp 500K
    * Do not use for anything other than its intended purpose.
    Maximum Height (mm)  201.8  Maximum Length (mm)  270  Clamping Pressure (kN [kgf])  5[500]  Clamp Arm Movement Angle (°)  66  Mass (g)  743  Handle Operation Angle (°)  83  Type  Downward holding type  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Spindle  Spindle M10 × 65 P = 1.5 
    Rating:
    60%
    from S$29.99
    Min. 2 days
  32. Latch Exclusive Toggle Clamp
    SUPER TOOL Latch Exclusive Toggle Clamp
    Base  Flange 
    Rating:
    96%
    from S$16.99
    Min. 2 days
  33. Push / Pull Type Toggle Clamp
    IKURA SEIKI Push / Pull Type Toggle Clamp
    Operating Angle (°)  180 
    Rating:
    100%
    from S$26.99
    Min. 2 days
  34. Side push toggle clamp (horizontal lever)
    MonotaRO Side push toggle clamp (horizontal lever)
    * Do not use for anything other than its intended purpose.
    Clamping Pressure (kN [kgf])  0.5[50]  Maximum Length (mm)  102.9  Stroke (mm)  16.2  Maximum Height (mm)  17  Handle Operation Angle (°)  180  Mass (g)  54  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Type  Side push type  Spindle  Spindle M4 × 18 P = 0.7 
    Rating:
    100%
    from S$15.99
    Min. 2 days
  35. Side Press Clamp
    KAKUTA Side Press Clamp
    Toggle clamp for pushing and pulling bracket mounting. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. Can also be used for woodworking and DIY. The tightening pressure shown is a guide. Impact, vibration, and internal pressure may cause damage. Be careful not t... Read More
    Type of Terminal Fitting  Bracket  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$36.99
    Min. 2 days
  36. Bolt / Nut (with swivel head)
    SUPER TOOL Bolt / Nut (with swivel head)
    Toggle clamp parts
    Inclination angle (°)  Material  Rolled steel for structural use  Specification  The swivel angle is 7 °. 
    from S$6.99
    Min. 2 days
  37. Side push toggle clamp (pull lever)
    MonotaRO Side push toggle clamp (pull lever)
    * Do not use for anything other than its intended purpose.
    Clamping Pressure (kN [kgf])  0.45[45]  Stroke (mm)  17  Handle Operation Angle (°)  190  Mass (g)  41  Maximum Height (mm)  45.24  Maximum Length (mm)  96.9  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SS400 (Unichrome)  Type  Side push type  Spindle  Spindle M4 × 18 P = 0.7 
    Rating:
    40%
    from S$11.99
    Min. 2 days
  38. Push and pull toggle clamp
    MonotaRO Push and pull toggle clamp
    A clamp for both pushing and pulling. The push position can be adjusted with the bolt and nut at the tip. For various fixing and temporary holding of metal and wood. * Do not use for anything other than its intended purpose.
    Type of Terminal Fitting  Bracket  Type  For both push and pull  Material (Handle)  PVC  Material (Main Unit)  SS400 
    from S$15.99
    Min. 2 days
  39. Contact bolt with speedy block rubber cap
    SPEEDY B Contact bolt with speedy block rubber cap
    For clamps such as finished surfaces. Used by attaching to a hollow clamp arm.
    Set Contents  2 nuts  2018 Trusco page  4 1732  Material  Steel 
    from S$5.39
    Min. 2 days
  40. Downward pressure type toggle clamp + vertical handle type
    MonotaRO Downward pressure type toggle clamp + vertical handle type
    Vertical handle type downward pressure type toggle clamp. The push position can be adjusted with the bolt and nut at the tip. For various fixing and temporary holding of metal and wood. * Do not use for anything other than its intended purpose.
    Type  Downward pressure type  Base  Flange  Material (Handle)  PVC  Material (Main Unit)  SUS304 
    from S$24.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 303

Set Ascending Direction