All Category

Other Mooring Supplies & Hardware

View : Grid List
Filter

31 Item(s)

Set Ascending Direction
  1. Boat hook telescopic
    BMO Japan Boat hook telescopic
    A boat hook with an adjustable length of about 1.2 to 2 m. Since it is compact at about 1.2 m when stored, the storage space can be small. The shaft part is made of aluminum. The grip and hook are made of high-strength plastic.
    Pipe Diameter (Φmm)  25/30  Material  Aluminum / Plastic  Length (mm)  1180~2040 
    Rating:
    80%
    from S$49.99
    Min. 2 days
  2. Stainless Steel Boat Hook
    Mizumoto Machine Mfg. Stainless Steel Boat Hook
    Made of stainless steel, it does not rust easily and has excellent durability. Attach it to a stick and use it as a tool to pull the boat
    Dimension d (mm)  Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    Rating:
    100%
    from S$28.99
    Min. 2 days
  3. Sandlet
    No Brand Sandlet
    Made in Japan, white, with good quality river sand inside, it is hard to bounce on the quay Connect the rope to the main body and throw it from the ship to the quay to pass the connecting rope. * Sand will leak from the inside when it is exhausted.
    from S$15.99
    Min. 2 days
  4. Boat hook  Telescopic
    Top Water Boats Boat hook Telescopic
    It is a telescopic boat hook. It is lightweight, very easy to use, and well made. The length extends up to 2 meters. By further narrowing the gap at the connection part, it prevents blurring when extended to the maximum and water intrusion from the connection part, improving durability.
    Dimension (mm)  1200~2070  Material  Aluminum, ABS resin 
    Rating:
    100%
    from S$44.99
    Min. 2 days
  5. Rubber lets for Ships (Rubber) Sandlets
    Iwasaki Seisakusho Rubber lets for Ships (Rubber) Sandlets
    It is a rubber sandlet. It is compact, easy to throw, and made of rubber, so it has a moderate weight and is not easily damaged.
    Material  Rubber 
    Rating:
    70%
    from S$19.99
    Min. 2 days
  6. Rubber let
    Taisei Sangyo Rubber let
    Made in Japan, weight for rope tip when mooring and berthing of ship Connect the rope to the main body and throw it to the quay side from the ship to pass the connecting rope.
    Dimension (Φmm)  73  Overall Length (mm)  230 
    from S$34.99
    Min. 2 days
  7. Stainless steel sumul 255mm in height
    Mizumoto Machine Mfg. Stainless steel sumul 255mm in height
    Made of stainless steel, it does not rust easily and has excellent durability. When using a ship or yacht, you can throw a smar attached to a rope etc. into the sea (underwater) and use it for simple mooring, or you can use it to pick up things in the water.
    Rating:
    20%
    from S$69.99
    Min. 2 days
  8. Stainless Cross Bit
    Mizumoto Machine Mfg. Stainless Cross Bit
    Made of stainless steel, it does not rust easily and has excellent durability. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Buffing  Material  Stainless steel (SUS304) 
    from S$259.90
    Min. 3 days
  9. Stainless mooring ring MR type
    Mizumoto Machine Mfg. Stainless mooring ring MR type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Dimension y (mm)  100  Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$159.90
    Min. 3 days
  10. Stainless mooring ring MIS type
    Mizumoto Machine Mfg. Stainless mooring ring MIS type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Dimension L1 (mm)  170  Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$159.90
    Min. 3 days
  11. Stainless steel fairlead
    Mizumoto Machine Mfg. Stainless steel fairlead
    Made of stainless steel, it does not rust easily and has excellent durability. It attaches to the deck of a yacht and acts as a rope guide.
    Finish  Buffing  Material  Stainless steel (SUS316) 
    from S$119.90
    Min. 3 days
  12. Stainless mooring ring MJ type
    Mizumoto Machine Mfg. Stainless mooring ring MJ type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$149.90
    Min. 3 days
  13. Stainless mooring ring MI type
    Mizumoto Machine Mfg. Stainless mooring ring MI type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$259.90
    Min. 3 days
  14. Stainless mooring ring MU type
    Mizumoto Machine Mfg. Stainless mooring ring MU type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$159.90
    Min. 6 days
  15. Self-luminous let  Mielzo
    Ube Shipping & Logistics Self-luminous let Mielzo
    Let's see even in the dark and change the rope-picking work at night! Since it can be used both day and night, it can be used during the day without a chemical light. With 2 chemical lights as accessories, the light emission time is 4 to 6 hours continuously.
    Included Accessories  2 chemical lights  Overall Length (mm)  225  Mass (g)  560  Maximum Diameter (Φmm)  70  Luminous hour (hours)  Continuous 4-6 
    from S$129.90
    Min. 9 days
  16. Sandlet Total Knitting
    No Brand Sandlet Total Knitting
    Made in Japan, white, with good quality river sand inside, it is hard to bounce when landing on the quay. Poly rope is woven on the entire surface, and it is a hard specification of sandlet. Connect the rope to the main body and throw it from the ship to the quay to pass the connecting rope. * Sa... Read More
    Overall Length (mm)  280  Maximum Diameter (Φmm)  75  Mass (g)  About 650 
    from S$38.99
    Min. 2 days
  17. Fiberglass joint pole
    Asano metal industry Fiberglass joint pole
    Can be connected to a marine rope cutter. * Joints of size 1800 or larger are not possible.
    Material  FRP  Thread Size  W1/2 
    from S$189.90
    Min. 7 days
  18. Stainless mooring ring MV type
    Mizumoto Machine Mfg. Stainless mooring ring MV type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$159.90
    Min. 3 days
  19. Stainless mooring ring MZ type
    Mizumoto Machine Mfg. Stainless mooring ring MZ type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Dimension W1 (mm)  100  Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$159.90
    Min. 3 days
  20. Stainless steel mooring ring MSL type
    Mizumoto Machine Mfg. Stainless steel mooring ring MSL type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Dimension L2 (mm)  100  Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$159.90
    Min. 3 days
  21. Glass fiber joint pole long set (with one connecting step bolt)
    Asano metal industry Glass fiber joint pole long set (with one connecting step bolt)
    It is a set that can be used in a long length by connecting a stepped bolt (AK7808) in the middle. (The joint pole can be used separately.) It can be connected to the marine rope cutter.
    Material  FRP 
    from S$459.90
    Min. 7 days
  22. Stainless mooring ring MW type
    Mizumoto Machine Mfg. Stainless mooring ring MW type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$159.90
    Min. 3 days
  23. Stainless mooring ring MS type
    Mizumoto Machine Mfg. Stainless mooring ring MS type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$369.90
    Min. 3 days
  24. Stainless mooring ring MT type
    Mizumoto Machine Mfg. Stainless mooring ring MT type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$159.90
    Min. 3 days
  25. Stainless mooring ring ML type
    Mizumoto Machine Mfg. Stainless mooring ring ML type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$159.90
    Min. 3 days
  26. Stainless Steel Cross Bollard
    Top Water Boats Stainless Steel Cross Bollard
    It is used by tying a mooring rope when mooring a ship by installing it on the bow, stern, pier, etc. This is convenient when using a rope that is thicker than cleats. Since the material used is high-grade stainless steel 316, which is resistant to rust, there are significant differences in corro... Read More
    from S$58.99
    Min. 7 days
  27. Cross bit
    Asano metal industry Cross bit
    Material  SUS304 
    from S$149.90
    Min. 8 days
  28. Stainless mooring ring MG type
    Mizumoto Machine Mfg. Stainless mooring ring MG type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$149.90
    Min. 3 days
  29. Stainless mooring ring MM type
    Mizumoto Machine Mfg. Stainless mooring ring MM type
    Since it is made of stainless steel, it is more resistant to corrosion and more beautiful than the conventional iron mooring ring, which is prone to corrosion. Install it on a pier or wharf and tie a wire rope to moor the ship.
    Finish  Barrel polishing  Material  Stainless steel (SUS304) 
    from S$159.90
    Min. 3 days
  30. For Mielzo  Chemical light
    Ube Shipping & Logistics For Mielzo Chemical light
    * Be careful not to get the liquid inside on your skin, get it in your eyes, or swallow it.
    Overall Length (mm)  70  Luminous hour (hours)  Continuous 4-6 
    from S$159.90
    Min. 9 days
  31. fairlead
    Asano metal industry fairlead
    Material  SCS14 (SUS316 equivalent) 
    from S$99.90
    Min. 2 days
View : Grid List
Filter

31 Item(s)

Set Ascending Direction