Uses 316 stainless steel Φ25mm pipe that does not rust easily! A foldable stainless steel ladder that can be used by fixing it to a transom. The fixed blanket to the boat can be mounted on both vertical and horizontal surfaces. Because it is compact, it is also ideal for small boats with a narrow... Read More
Bearing sheaves produce smooth rotation. The bolt end face of the sheave pin is firmly fixed by caulking. In addition, the swivel is forged to increase strength and safety.
* Two bearings made of iron (with rubber seal) are used. * The working load is based on the working load of the bearing.
Ship / fire / watering hose
*This fire hose cannot be installed where inspection is required by the Fire Service Act. Please purchase the certified hose [Aquajet]
Type of Sign Aluminum caulking Standard General goods Material (Hose) Polyester Withstand Pressure (MPa) 1.3 Hardware Machino type Material (Metal Hub) Made of brass
Rubber U packing for Machino type scalpel. This product conforms to the Japanese Industrial Standards (JIS).
* Compatible with Iwasaki Seisakusho. Please note that the size may not match depending on the tolerances made by other companies.
KIV (Vinyl insulated wire for electrical equipment) This is a battery parallel cable made by crimping four round crimp terminals R22-10 to one 0.5m red and black wire with a thickness of 22SQ. How about when you put two batteries in parallel? RoHS compliant product
Battery parallel cable
* Cable ... Read More
7-pin type trailer side wiring coupler. Please use it when replacing due to aged deterioration such as wear and rust.
* Wiring work is required, so please handle with care.
Hose for ships, fire fighting and watering. Working pressure 1.3MPa Only the inner rubberized hose is available, so use it in combination with the separately sold metal fittings and hose band. Please use it as a hose protection cover for wiring and a slightly smaller diameter.
Standard General goods Material (Hose) Polyester Withstand Pressure (MPa) 1.3 Hardware None (hose only)
7-pin type wiring socket. Rubber wiring cover boots are attached to the back of the socket body.
* Wiring work is required, so please handle with care.
It is a 105A (M27MF) plastic battery tray. There is a mounting hole on the side of the toilet, and it can be fixed with screws. Reduces damage to boats and batteries due to vibration.
Hose for ships, fire fighting and watering. Working pressure 1.3MPa Inner surface rubberized Since it comes with brass fittings, it is also suitable for use in ships. Since the metal fittings and hose attachment part are wound with copper wire, the metal fittings can be removed.
Type of Sign Copper wire winding Standard General goods Material (Hose) Polyester Withstand Pressure (MPa) 1.3 Hardware Machino type Material (Metal Hub) Made of brass
KIV (Vinyl insulated wire for electrical equipment) This is a battery parallel cable made by crimping four round crimp terminals R38-10 to one 0.5m red and black wire with a thickness of 38SQ. How about when you put two batteries in parallel? RoHS compliant product
Battery parallel cable
* Cable ... Read More
Designed for excellent safety. The surface treatment method for the terminal fixing bolt is a 14mm spanner tightening type for fixing the gold-plated fuse, which has excellent electrical conductivity, low contact resistance, and heat dissipation. Compatible with ANL fuses 35A to 500A.
For safe us... Read More
JIS F3410-1999 C type. Welded mounting type. It can be used as a hanging strap by attaching it to a structure as a hanging piece.
For fixing structures such as rope terminals, shackles, and pulleys, or for hanging straps when hanging as hanging pieces.
* Please firmly weld.
It is a circuit breaker installed between wirings. Since it comes with a direct battery stay, it can be directly connected to the screw terminal of the battery.
* It is not waterproof.
Included Accessories cap Rated Voltage (V) DC12/24 Rated Current (A) 50
The sealing material is designed to prevent water from entering. Two sizes, 4-inch type and 6-inch type, are available.
* Since it is not completely waterproof, do not install it in places where water intrusion is a problem.
It is a cable with round crimp terminals R8-10 and R8-S4 crimped to one side each, one red and one black with a thickness of 8SQ KIV cable 1m and 5m. It is a cable for connecting the traveling charger (SBC-001B SBC-004) and the main battery / sub-battery. The copper wire inside the cable is very ... Read More
Size 8SQ Heat Resistance Temperature (℃) 105 Allowable Current of Cable (A) 80 Core wire diameter (Φmm) 4.23
It is a 105A (M27MF) plastic battery tray. There is a mounting hole on the side of the toilet, and it can be fixed with screws. Reduces damage to boats and batteries due to vibration.
The outer surface is woven firmly with abrasion-resistant threads, and the inner surface is made of resin with the same specifications as the domestic firefighting standards (NS). A fire hose for ships with a working pressure of 1.3MPa that has passed the Marine Products Certification Association... Read More
A set of 7-pin type wiring socket and wiring (1.5m). Rubber wiring cover boots are attached to the back of the socket body, and 6 pressure terminals required for wiring are also attached.
* Wiring work is required, so please handle with care.
Included Accessories Crimp terminal x 6 Number of Pins 7
The parasol struts are made of lightweight aluminum! The frame uses sturdy glass fiber! The inside of the parasol is UV coated in black, making it a fishing parasol that blocks UV rays.
* The parasol stand is a product that is premised on "use in no wind to light wind". If you receive a... Read More
Material Aluminum / glass fiber / polyester Color Blue (Omote) / Black (Ura) Fabric Water repellent finish
Prevents overcurrent to the inverter. It can also be used as a fuse for car audio. High-grade materials are used to improve conductivity. The quality control is very good and the durability is excellent. Compatible with fuse holder FH-G (sold separately).
* If the inverter is overloaded, there is... Read More
Operating Temperature Range (℃) -20~125 Operating Voltage Range (V) DC80
Attach it to the deck or wall of a boat to make effective dead space! Water does not easily enter due to the sealing material!
* Since it is not completely waterproof, do not install it in places where water intrusion is a problem.
Used in combination with a buckle with a band (hoop material) for tying electric wires on ships.
Attach the band buckle and tie the wire and support together.
* Be careful not to get injured because the tip and others are sharp.
A 14SQ thick KIV cable 1m and 5m red and black, with round crimp terminals R14-10 and R14-6 crimped on each side. It is a cable for connecting the traveling charger and the main battery / sub battery. The copper wire inside the cable is very thin and has excellent flexibility.
Cable for connectin... Read More
Size 14.0 mm2 Heat Resistance Temperature (℃) 105 Allowable Current of Cable (A) 120 Core wire diameter (Φmm) 5.64
An ultra-bright spotlight that is perfect for search lights! A round type LED light that uses 14 LEDs. With an irradiation distance of about 200 to 300 m, it can secure sufficient brightness as a searchlight for ships. With IP67 waterproof performance, it is ideal for marine use.
Mass (g) 1500 Power Consumption (W) 39 Input Voltage (V) (DC)10~30 Mounting Bolts M10 Color Temperature (K) 6000 LED [Chip] OSRAM Luminous Flux (Lm) 8400 Waterproof IP67
A female cap for brass Machino type metal fittings. (Chain is sold separately) It can be used in a wide range of fields such as agriculture, firefighting, and ships. This product complies with Japanese Industrial Standards (JIS) F7335.
For cleaning equipment such as seawater suction ports and boi... Read More
You can easily "install / remove" the seat! A pair of "separate type" swivel bases that are used by attaching bases to the seat side and boat side respectively. If you attach the base to the seat and the boat respectively first, then you can easily attach and detach the seat d... Read More
Included Accessories [Number of screws] 4 Thread Standard [For boat side installation] M6 x 25
Easy to install and remove the electric power supply! A one-touch battery clip that can be easily connected to the battery by simply putting it on the terminal and pushing down the cover.