All Category

Fishing Tackles

View : Grid List
Filter

Items 1 - 40 of 542

Set Ascending Direction
  1. Rod holder (1 to 6 stations)
    BMO Japan Rod holder (1 to 6 stations)
    A screw for both assembly and wall mounting is attached, and the rod fixing bar and rod holder can be fixed and mounted on the wall at once.
    Material  Resin  Inner Diameter (Φmm)  [Holder] 45  Outer Diameter (Φmm)  [Holder] 50 
    from S$19.99
    Min. 2 days
  2. Plastic rod holder for rails
    BMO Japan Plastic rod holder for rails
    A rod holder that can be attached to bow rails, etc. Since the angle of the rod holder can be adjusted 360 degrees, it can be fixed and used at the desired angle. In addition, a V-shaped notch is used to increase stability when inserting the rod.
    Length (mm)  210  Installable pipe diameter (Φmm)  21~25  Inner Diameter (Φmm)  45  Material  Resin 
    from S$29.99
    Min. 2 days
  3. Rod holder (2 to 4 stations) Integrated type
    BMO Japan Rod holder (2 to 4 stations) Integrated type
    An integrated multi-rod holder that does not require troublesome assembly. It is lighter and more compact than the prefabricated multiple rod holder, making it suitable for mounting on small boats.
    Material  Resin  Type of Terminal Fitting  Screw fixing  Dimension (mm)  [Between holders (heart, heart)] 126  Inner Diameter (Φmm)  [Holder] 45  Outer Diameter (Φmm)  [Holder] 50 
    from S$37.99
    Min. 2 days
  4. Clamp on Single rod holder Light
    Intercom Marine Clamp on Single rod holder Light
    Pole type (pipe clamp type) rod holder. Made of sturdy all-stainless steel, the silver color that grows vividly on the hull gives it a luxurious feel. The stainless steel material is SUS316, which has improved corrosion resistance and durability. Please use it as a light weight rod holder of less... Read More
    Length (mm)  232  Inner Diameter (Φmm)  40  Outer Diameter (Φmm)  48  Material  Stainless steel SUS316 
    Rating:
    67%
    from S$29.99
    Min. 2 days
  5. Stainless base
    BMO Japan Stainless base
    A thin base for fishing gear that allows you to customize the boat bulwark and toolbox (docut) to your liking. Made of stainless steel, ideal for hard fishing life. In addition, it is safe because it can be firmly fixed with screws. It is possible to attach various attachments (custom parts) of t... Read More
    Material  Stainless steel 
    Rating:
    100%
    from S$49.99
    Min. 2 days
  6. Pipe base
    BMO Japan Pipe base
    A pipe base that can be attached to bow rails, etc. Stepless adjustment is possible according to the diameter of the mounting pipe. Please use it as a mounting base for each attachment.
    from S$36.99
    Min. 2 days
  7. BM base BM-A3DB-100
    BMO Japan BM base BM-A3DB-100
    Compatible with BMO fishing gear "Extreme". A thin base that allows you to choose the attachment that suits your fishing style. A thin base for fishing gear that allows you to customize the boat bulwark and toolbox (docut) to your liking. It can be firmly fixed with screws. It is possib... Read More
    Screw Hole (Φmm)  6.2  Screw hole spacing (mm)  68×36  Base Dimensions (mm)  90×68×23 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  8. Rod holder Aluminum 5 stations Long
    Top Water Boats Rod holder Aluminum 5 stations Long
    It is a high-strength grade aluminum material and is anodized (anodized) to enhance corrosion resistance and durability. The color is silver, which shines brightly on the hull, giving it a luxurious feel. Soft resin rubber is used for the grounding part of the rod and reel to prevent the spinning... Read More
    Material  Aluminum (anodized)  Interval (mm)  (Holder) 80  Dimensions (Width W x Height H) (mm)  540×270  Holder Diameter (mm)  (Inner diameter) 45 
    Rating:
    60%
    from S$129.90
    Min. 2 days
  9. Multi attachment
    BMO Japan Multi attachment
    Since screw holes for processing are prepared, it is a multi-base that expands various possibilities depending on your ideas, such as attaching fishfinders and GPS. * Screws are not included.
    Material  Resin 
    from S$11.99
    Min. 2 days
  10. Rod holder Aluminum 4 stations Standard
    Top Water Boats Rod holder Aluminum 4 stations Standard
    It is a high-strength grade aluminum material and is anodized (anodized) to enhance corrosion resistance and durability. The color is silver, which shines brightly on the hull, giving it a luxurious feel. Soft resin rubber is used for the grounding part of the rod and reel to prevent the spinning... Read More
    Holder Diameter (mm)  (Inner diameter) 45  Interval (mm)  (Holder) 80  Material  Aluminum (anodized)  Dimensions (Width W x Height H) (mm)  420×150 
    Rating:
    100%
    from S$75.99
    Min. 2 days
  11. Extreme grip  Head parts
    BMO Japan Extreme grip Head parts
    It is a head part for fixing the rod of the extreme grip. Please use it for expansion.
    Rating:
    60%
    from S$26.99
    Min. 8 days
  12. Multi rod holder extreme
    BMO Japan Multi rod holder extreme
    Since the tip of the holder has a rotary lock, it is possible to stand the holder and use it as a rod stand. With a line stopper, you can fix the fishing line as needed. This is convenient when moving points. This product can be easily installed and removed by releasing the lock button and lock l... Read More
    Type  only a main part  Specification  [Attached base] None 
    Rating:
    40%
    from S$44.99
    Min. 8 days
  13. Rail slider base
    BMO Japan Rail slider base
    BMO fishing gear "extreme" attachment compatible! Slide freely on the aluminum rail. Two types of slider bases are available to accommodate aluminum rails that face either the top (vertical) or side (horizontal) directions according to the application. Select the slider base type accord... Read More
    Material  Resin 
    from S$23.99
    Min. 2 days
  14. Suspension pita / rod holder (for rail)
    BMO Japan Suspension pita / rod holder (for rail)
    Designed exclusively for the rail system, it is firmly set on the rail! It can be easily set on the rail system of the "Tsuripita" series, including the Dokat rail system! A rod holder compatible with the rails of the hanging pita rail system (sucker type / screw fixed type) and docut r... Read More
    Type  For rail  Material  Resin 
    from S$28.99
    Min. 8 days
  15. Extend arm
    BMO Japan Extend arm
    The distance between the mounting base of the BMO fishing gear and the attachment can be extended. By combining between the mounting base and the attachment (rod holder, etc.), it is possible to extend the distance from the mounting base to the attachment. Please use it when the height of the rod... Read More
    Included Accessories  1 knob screw  Material  Resin / Aluminum 
    from S$28.99
    Min. 8 days
  16. Rod holder Aluminum 5 standard
    Top Water Boats Rod holder Aluminum 5 standard
    It is a high-strength grade aluminum material and is anodized (anodized) to enhance corrosion resistance and durability. The color is silver, which shines brightly on the hull, giving it a luxurious feel. Soft resin rubber is used for the grounding part of the rod and reel to prevent the spinning... Read More
    Material  Aluminum (anodized)  Interval (mm)  (Holder) 80  Holder Diameter (mm)  (Inner diameter) 45  Dimensions (Width W x Height H) (mm)  540×150 
    Rating:
    100%
    from S$87.99
    Min. 7 days
  17. Handrail
    BMO Japan Handrail
    A handrail that can be used as an assist grip when getting on and off the boat and when maneuvering, or as a base for rod holders for mounting rails.
    Pipe Diameter (Φmm)  22  Screw hole spacing (mm)  42  Screw Hole (Φmm)  Material  SUS316  Number of screw holes  Three 
    from S$55.99
    Min. 9 days
  18. Handrail
    Top Water Boats Handrail
    The mirror finish made of stainless steel 316 gives a very beautiful finish. All are handmade and bent and finished, so the design is very simple but emphasizes the curvaceous beauty. It is a recommended gem that can greatly improve the appearance of the boat just by changing the handrail. Since ... Read More
    Pipe Diameter (Φmm)  25 (oval)  Mounting Bolts  45mm 
    from S$45.99
    Min. 7 days
  19. Folding cup holder (direct attachment)
    BMO Japan Folding cup holder (direct attachment)
    A foldable cup holder that can be attached with screws. It fits in a 500ml PET bottle and can be folded when not in use. * Double-sided tape is for temporary fixing and cannot be completely fixed. Be sure to screw it in.
    Screw Hole (Φmm)  6.5 × 2 locations, 5.2mm × 6 locations  Type  Direct attachment  Material  Resin  Dimensions, Vertical x Horizontal x Depth (mm)  [Cup holder] 100 x 100 x 100  Thickness (mm)  [When folded] 25 
    from S$8.89
    Min. 2 days
  20. Fishing pita / pliers holder (without base)
    BMO Japan Fishing pita / pliers holder (without base)
    Pliers holder attachment for fishing pita series! * This product does not come with a mounting base (sucker, screw fixing, etc.). * Please prepare a mounting base separately according to the application. * The size notation is the outer size that does not include the insertion protrusion.
    Mass (g)  42  Length (mm)  53 (including protrusions)  Dimensions, Width W x Height H x Depth D (mm)  75×110×22  Material  EVA / resin  Type  No base 
    Rating:
    100%
    from S$15.99
    Min. 2 days
  21. Fish finder ball mount 20Z0197
    BMO Japan Fish finder ball mount 20Z0197
    Introducing a stand that allows you to adjust the fishfinder position in all directions! A fishfinder ball mount with a BM base. A large number of screw holes are provided so that fishfinders from each manufacturer can be installed without drilling. The ball mount system allows you to freely adju... Read More
    Material  Aluminum / resin / rubber  Specification  [Attached base] BM base  Dimensions, Height x Width (mm)  [Fish finder mounting plate] 51 x 159 
    from S$119.90
    Min. 2 days
  22. Multi rod holder extreme ST
    BMO Japan Multi rod holder extreme ST
    A basic set with a thin resin base (BM base). The attached base is firmly fixed to the ship's edge with screws. It can be attached to various objects, not limited to the ship's edge.
    Screw Hole (Φmm)  6.2  Screw hole spacing (mm)  68×36  Base Dimensions (mm)  90×68×23  Type  BM base  Specification  [Attached base] BM base 
    from S$58.99
    Min. 2 days
  23. Compact rail IF640
    BMO Japan Compact rail IF640
    Introducing a compact length of 640 mm. It can be easily attached and detached by covering the rubber base attached to the rubber boat. The legs on both sides can be attached so that the rubber boat is firmly pressed down, giving a sense of stability.
    Reel type  640mm  Base  IF base  Height adjustment  Stand part: 68-106mm 
    Rating:
    100%
    from S$189.90
    Min. 9 days
  24. Best for Fishing / Rod Holder (Suction Cup Base Set)
    BMO Japan Best for Fishing / Rod Holder (Suction Cup Base Set)
    It is a set product of the rod holder of the fishing pita series and the suction cup base. Since it is easy to install and remove, it is perfect for cases such as cooler boxes and shared ships where the base cannot be fixed with screws. * Sufficient adsorption may not be possible depending on the... Read More
    Allowable Load (kg)  Material  Made of resin  Type  Sucker base set  Color  White  Dimensions, Width W x Depth D x Height H (mm)  [Base] 75 x 70 x 29 
    Rating:
    20%
    from S$37.99
    Min. 8 days
  25. Fishing pita / cup holder (without base)
    BMO Japan Fishing pita / cup holder (without base)
    Cup holder attachment for fishing pita series! * This product does not come with a mounting base (sucker, screw fixing, etc.). * Please prepare a mounting base separately according to the application.
    Included Accessories  2 screws for insertion parts  Inner Diameter (Φmm)  71  Type  No base  Material  Resin  Dimensions, Width W x Depth D x Height H (mm)  [Holder] 88 x 93 x 75 
    Rating:
    100%
    from S$17.99
    Min. 2 days
  26. Clamp on Single rod holder Large
    Intercom Marine Clamp on Single rod holder Large
    Pole type (pipe clamp type) rod holder. Integrated structure with mold. Made of sturdy all-stainless steel, the silver color that grows vividly on the hull gives it a luxurious feel. The stainless steel material is SUS316, which has improved corrosion resistance and durability. Please use it as a... Read More
    Installable pipe diameter (Φmm)  22~32  Length (mm)  235  Inner Diameter (Φmm)  42  Outer Diameter (Φmm)  51  Material  Stainless steel SUS316 
    from S$67.99
    Min. 2 days
  27. Stainless Extend Arm SN
    BMO Japan Stainless Extend Arm SN
    The distance between the mounting base of the BMO fishing gear and the attachment can be extended.
    Material  Stainless steel 
    from S$58.99
    Min. 8 days
  28. Shaft with gear (SUS)
    BMO Japan Shaft with gear (SUS)
    A new specification stainless steel shaft with gears. A knob for fixing is added and it can be fixed more firmly than the conventional type. It is possible to reduce rattling by tightening the knob. * This product is a stainless shaft and gear type product. We recommend that the mounting base att... Read More
    Dimension (mm)  48×48×81.5  Material  Stainless steel / resin 
    Rating:
    100%
    from S$34.99
    Min. 9 days
  29. Stainless rod holder Stainless pipe base set
    BMO Japan Stainless rod holder Stainless pipe base set
    Easy installation without tools! Compatible with Φ22-32mm pipes! A rod holder that can be easily attached to and removed from the pipe by inserting and removing the lock pin. The holder part can be freely rotated 360 degrees. You can also adjust the vertical position of the holder and the angle o... Read More
    Material  Stainless steel / resin  Holder Diameter (mm)  Φ41  Included Accessories  Stainless pipe base  Installable pipe diameter (Φmm)  22~32  Outer Dimensions, Width W x Depth D x Height H (mm)  83×147×274 
    from S$189.90
    Min. 2 days
  30. Fishing pita / sucker base
    BMO Japan Fishing pita / sucker base
    Perfect for those who want to easily install items! * Attachments (rod holder, cup holder, etc.) are not included with this product. * Please prepare an attachment separately according to the application. * Sufficient adsorption may not be possible depending on the installation target and usage e... Read More
    Allowable Load (kg)  Mass (g)  [Base] 60  Dimensions, Vertical x Horizontal x Depth (mm)  [Base] 75 x 29 x 60  Length (mm)  [Lever raised] 60 
    from S$14.99
    Min. 9 days
  31. Fishing pita / hook
    BMO Japan Fishing pita / hook
    Compatible with the fishing pita series. Hook attachment! * This product does not come with a mounting base (sucker, screw fixing, etc.). * Please prepare a mounting base separately according to the application.
    Type  No base  Allowable Load (kg)  [Hook] 5 
    Rating:
    100%
    from S$4.49
    Min. 9 days
  32. Fishing pita / multi-adapter (sucker base set)
    BMO Japan Fishing pita / multi-adapter (sucker base set)
    It is a set product of the fishing pita series multi-adapter and suction cup base. Since it is a suction cup base, it is easy to install and remove. Therefore, it is perfect when the base cannot be fixed with screws, such as in a cooler box or a shared ship. * Sufficient adsorption may not be pos... Read More
    Thread Pitch (mm)  48  Allowable Load (kg)  Screw Hole (Φmm)  6.5  Included Accessories  Double-sided tape  Material  Resin  Type  Sucker base set  Mass (g)  [Base] 60  Dimensions, Vertical x Horizontal x Depth (mm)  [Base] 75 x 29 x 60  Length (mm)  [Lever raised] 60  Dimensions, Width W x Depth D x Height H (mm)  [Multi-adapter] 64 * 22 * 28 
    from S$25.99
    Min. 9 days
  33. Extreme grip light M body only
    BMO Japan Extreme grip light M body only
    Introducing a resin light type for extreme grips! Can be used for light fishing. The rod can be removed from the holder with a single touch, and it is also compatible with shakuri. * The shaft of this product is made of resin. Select a resin socket type mounting base to match. * Be sure to use a ... Read More
    Holder  Extreme grip light M  Dimensions, Width W x Depth D x Height H (mm)  Holder: 213 x 58 x 200  Material (Tip Holder)  Resin / Rubber  Applicable rod diameter (Φmm)  Φ8~20 
    from S$79.99
    Min. 9 days
  34. Step rail base II (stainless steel socket type)
    BMO Japan Step rail base II (stainless steel socket type)
    It is a base required when attaching various attachments to the step rail. The socket part is made of stainless steel, so please use it when attaching heavy attachments. The resin knob screw makes it easy to tighten when installing without tools. Can be
    Material  Stainless steel / resin  Type  Stainless socket type 
    Rating:
    100%
    from S$58.99
    Min. 9 days
  35. Extreme Grip Light M Vise set for boat fishing
    BMO Japan Extreme Grip Light M Vise set for boat fishing
    Introducing a resin light type for extreme grips! Can be used for light fishing. The rod can be removed from the holder with a single touch, and it is also compatible with shakuri. A set of boat fishing vise for ship rim attachment and extreme grip light. * Be sure to use a tail rope to prevent t... Read More
    Dimensions, Width W x Depth D x Height H (mm)  Holder: 213 x 58 x 200  Holder  Extreme grip light M  Material (Foot Plate)  Stainless steel / resin  Mounting Side  Vertical / Horizontal  Applicable rod diameter (Φmm)  Φ8~20  Material (Tip Holder)  Resin / Rubber  Applicable plate thickness (mm)  ~158 
    from S$259.90
    Min. 9 days
  36. Clamp base
    BMO Japan Clamp base
    Installation completed with one touch Aluminum vise base Since it is a vise type base that supports attachments of the BMO fishing gear "Extreme" series, it can be attached to and removed from boat bulwarks without using tools. You can freely customize the fishing space by attaching var... Read More
    Material  [Vise part] Aluminum  Suitable Door Thickness to Mount (mm)  ~75 
    from S$119.90
    Min. 9 days
  37. Fishing pita / cup holder (sucker base set)
    BMO Japan Fishing pita / cup holder (sucker base set)
    It is a set product of the cup holder and suction cup base of the fishing pita series. Since it is easy to install and remove, it is perfect for cases such as cooler boxes and shared ships where the base cannot be fixed with screws. * Sufficient adsorption may not be possible depending on the ins... Read More
    Included Accessories  2 screws for insertion parts  Allowable Load (kg)  Inner Diameter (Φmm)  71  Material  Resin  Type  Sucker base set  Mass (g)  [Base] 60  Dimensions, Vertical x Horizontal x Depth (mm)  [Base] 75 x 29 x 60  Dimensions, Width W x Depth D x Height H (mm)  [Holder] 88 x 93 x 75  Color  [Holder] White  Length (mm)  [Lever raised] 60 
    from S$29.99
    Min. 9 days
  38. Knob socket
    BMO Japan Knob socket
    * Cannot be used separately.
    from S$7.49
    Min. 9 days
  39. Suspension pita / sucker base sheet
    BMO Japan Suspension pita / sucker base sheet
    I want to stick the suction cup to the textured surface! In such a case, this sheet !! * We do not support uneven surfaces (wallpaper, etc.) that are not textured surfaces. * If the suction surface of this product is dirty, the suction power will decrease. * If the adsorption power decreases, was... Read More
    Conform to  Fishing pita / suction cup base only 
    from S$7.49
    Min. 9 days
  40. Stainless steel pipe base spacer
    BMO Japan Stainless steel pipe base spacer
    Resin spacer for stainless steel pipe base. Increases the fixing force of the stainless steel pipe base.
    Suitable Pipe Diameter (Φmm)  22~25  Material  Resin  Conform to  Stainless pipe base  Outer Dimensions (mm)  Φ30×40  Dimension (mm)  Φ30×40 
    from S$4.49
    Min. 9 days
View : Grid List
Filter

Items 1 - 40 of 542

Set Ascending Direction