All Category

Measuring Equipment

View : Grid List
Filter

Items 1 - 40 of 35850

Set Ascending Direction
  1. Convex Tape Measure Rubber Protective Casing
    MonotaRO Convex Tape Measure Rubber Protective Casing
    It can be fixed in any position with the slide lock. Comes with a rubber protector to soften the impact. For measuring length. * Be careful not to get an electric shock as it is a conductive product. * For safety, wear protective goggles and work gloves when using. * Please keep out of reach of c... Read More
    Type  With lock  Material (Case)  ABS/PVC  Type of Scale  One side  Material (Tape)  SK4  Color (Body)  Yellow  End Hook  0 point correction moving claw 
    Rating:
    87%
    from S$5.19
    Min. 2 days
  2. Straight Ruler
    MonotaRO Straight Ruler
    With scales on both sides, it is convenient for dimension measurement, drawing and scribing work. A lineup of lengths from 150 mm to 2000 mm to suit your application. Comes with an inch conversion table on the back and a table for prepared screw holes. For measuring dimensions. For drawing work. ... Read More
    Material  Stainless steel  Surface Treatment  Silver finish 
    Rating:
    83%
    from S$2.49
    Min. 2 days
  3. G Lock
    Tajima (TJM DESIGN) G Lock
    A combo that guards the whole body with elastic elastic resin Lock type. * Products with proofreading cannot be canceled after ordering. * For products with calibration documents and traceability system diagrams, we can only accept orders online. * Documents applicable only to products that inclu... Read More
    Type  With lock  Material (Case)  ABS resin  Type of Scale  One side  JIS Standard  First grade  Material (Tape)  SK85 (formerly SK5)  Material (Cover)  Elastomer resin  JIS Class  JIS Class 1  Material (Spring)  SK85 (formerly SK5)  End Hook  0 point correction moving claw 
    Rating:
    86%
    from S$12.99
    Min. 2 days
  4. Feeler Gauge
    MonotaRO Feeler Gauge
    Domestic gauge specialized manufacturer OEM product! You can easily inspect the minute distance between two planes that cannot be measured with other measuring instruments. Used for measuring the clearance between pistons and cylinders of automobiles and engines. *Do not use for anything other th... Read More
    Material  SK hardened steel (SK2 to SK5)  Hardness  HV420~520 
    Rating:
    90%
    from S$7.29
    Min. 2 days
  5. Magnet Base
    MonotaRO Magnet Base
    A strong magnet and a sturdy frame provide stable measurements. Adsorption ON / OFF can be switched by operating the changeover switch. A dial gauge with an ear metal (ear metal diameter Φ6.5 mm), a dial gauge with a stem diameter of Φ6 / Φ8 mm, or a lever type dial gauge can be attached. * Do no... Read More
    Specification  Popular, standard type  Magnetic Attraction Force (N [kgf])  800[80] 
    Rating:
    83%
    from S$31.99
    Min. 2 days
  6. Standard Vernier Caliper
    MonotaRO Standard Vernier Caliper
    Vernier reading type standard type caliper. The scale is easier to see than the conventional product. Comes with a convenient storage case. For measuring outer diameter, inner diameter, step, and depth * Do not use for any other purpose. * Wipe off any dirt such as oil, dust, and chips before use.
    Material  Stainless steel 
    Rating:
    90%
    from S$34.99
    Min. 2 days
  7. Straight Ruler Stainless Steel with Red Numbers JIS
    Shinwa Rules Straight Ruler Stainless Steel with Red Numbers JIS
    JIS 1 grade (15 cm to 2 m). It has an inch conversion table and a screw pilot hole table on the back side. (From 15cm to 1m. No more than 1.5m) The scale is chrome-plated, making it difficult to remove. Utilizing the surface of the stainless steel material as it is, we provide it at a reasonable... Read More
    Material  Stainless steel  JIS Standard Certification  Acquired 
    Rating:
    83%
    from S$3.39
    Min. 2 days
  8. Feeler Gauge
    Shinwa Rules Feeler Gauge
    A thickness gauge with a wide variety of lengths and leaves to suit your needs. Gauge that inserts into the gap and measures dimensions *Please do not forcefully insert the leaf. *This product is not quenched. * Only 1 leaf with a thickness of 0.10 mm is available for calibration certificate (pri... Read More
    Material  Carbon tool steel (SK6)  Hardness  HV360~600 
    Rating:
    90%
    from S$8.69
    Min. 2 days
  9. Feeler Tape
    MonotaRO Feeler Tape
    Filler tape is used for assembling and adjusting automobile engines and other internal combustion engines. It can be used by cutting to the required dimensions, and can also be used to measure the gap between pistons and cylinders of aircraft and ships. It is also used for machine adjustment and ... Read More
    Material  SK hardened steel 
    Rating:
    92%
    from S$7.69
    Min. 2 days
  10. Precision Scale
    MonotaRO Precision Scale
    Large and easy-to-read scale. For weighing at manufacturing sites, agricultural work, and fishery processing. * This scale is not a "specified measuring instrument" specified by the Measurement Law. It cannot be used for transactions or proofs.
    Type  Precision scale  Color (Body)  Blue  Weighing Pan Shape  Square  Unit of Weighing  kg 
    Rating:
    84%
    from S$39.99
    Min. 2 days
  11. MAGJACKET Magnetic Tape Measure
    KOMELON MAGJACKET Magnetic Tape Measure
    Strong mug claws and double-sided scale that can be easily measured by one person Compact and shock-resistant jacket convex Easy-to-read tape with reduced reflection
    Type  With lock  Type of Scale  Both sides  JIS Standard  First grade  End Hook  Magnet nails 
    Rating:
    93%
    from S$12.99
    Min. 2 days
  12. Square with Stand and Scale
    MonotaRO Square with Stand and Scale
    Measurement of right angles of jigs and tools, right angles by mounting jigs and tools, and right angles of products. The rod and stand are firmly joined with rivets. Since the short piece is thick, it can be measured in an upright position. * Do not use for anything other than its intended purpose.
    Material  竿 / Stainless steel stand / Carbon steel  Type  Skoya with stand  Surface Treatment  Polishing finish scale / Etching step 
    Rating:
    78%
    from S$12.99
    Min. 2 days
  13. Magnet holder Neodymium magnet
    MonotaRO Magnet holder Neodymium magnet
    Neodymium magnet exerts strong attractive force and can be attracted and held for various purposes. The screw hole on the back allows it to be incorporated into jigs and various molds, and can be widely applied. Please use for various adsorption and holding. * Please note that the clock, card, an... Read More
    Maximum Operating Temperature (℃)  80  Material (Magnet)  Neodymium magnet 
    Rating:
    86%
    from S$7.29
    Min. 2 days
  14. Curve Scale Silver Thick Wide
    Shinwa Rules Curve Scale Silver Thick Wide
    A thick and wide type that is strong against impact and does not easily get out of angle. Suitable for ironwork and civil engineering work. Very convenient when injuring metal. It is an easy-to-see full-scale silver finish (matte finish) that suppresses the reflection of light on the surface. Wit... Read More
    Specification  JIS mark with red numbers  Shape  Same thickness  Right Angle Accuracy  0.1mm or less per 100mm  JIS Standard  Conformity 
    Rating:
    94%
    from S$45.99
    Min. 2 days
  15. M Type Standard Caliper
    Mitutoyo M Type Standard Caliper
    This is the most commonly used vernier caliper. Stepped scale surface prevents dust from entering between the main scale and slider. Since the main scale and the head end face of the slider are set as the 0 (zero) reference point (measurement surface), step measurement is possible. The standard v... Read More
    Series  530 
    Rating:
    93%
    from S$67.99
    Min. 2 days
  16. Digital Bench Scale SH Series
    A&D Digital Bench Scale SH Series
    High resolution of 1/2000, fine and lightweight structure that is easy to carry (with convenient handles on the left and right) Low overall height with little vertical movement and easy loading and unloading Large display (character height 25 mm for clear display) Large lightweight plate (230 x 1... Read More
    Included Accessories  Instruction manual  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    91%
    from S$129.90
    Min. 2 days
  17. Aluminum straight scale Alsuke (with non-slip)
    Shinwa Rules Aluminum straight scale Alsuke (with non-slip)
    Uses large and clear scale numbers. Light and durable without rusting. With Danger Prevention Wall-Higher than the cutting surface so the cutter won't slip over. A sponge is attached to the back side, so you can hold the ruler with a light force. Used for length measurement, grooving and cutt... Read More
    Material  Aluminum  Type of Scale  Meter scale 
    Rating:
    94%
    from S$6.99
    Min. 2 days
  18. Standard ABS Digimatic Caliper
    Mitutoyo Standard ABS Digimatic Caliper
    It is a product that can use the "re-proofreading service" that allows you to quickly and easily request proofreading and delivery of existing products online. For more information, please check the recalibration service category. * We do not deliver to private homes (detached houses / ... Read More
    Series  500  Quantization Error  Does not include ± 1 count  Maximum Response Speed  No limit  Thumb Roller  None  Battery Life  About 5 years in normal use  Output Terminal  None  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    95%
    from S$229.90
    Min. 2 days
  19. Convex Smart Gear
    Shinwa Rules Convex Smart Gear
    With its compact design, it easily fits in your waist bag. A large hook hanger that is convenient for attaching a fall prevention cord. Comes with a shock absorber (shock absorbing material). Comes with a belt clip. Comes with a strap. With 455mm pitch display. Equipped with zero point correction... Read More
    Specification  With strap  Material (Main Unit)  ABS resin, elastomer resin  Type  With lock  Material (Tape)  Steel  End Hook  Normal nails  RoHS directive (corresponding to 10 substances)  Correspondence  Type of Scale  Both sides  material (tape end)  Steel 
    Rating:
    81%
    from S$8.99
    Min. 2 days
  20. Analog Testers
    MonotaRO Analog Testers
    * Do not use for anything other than its intended purpose.
    Mass (g)  140  Power Supply  AA battery x 1  AC Voltage (V)  10/50/250/500  Resistance (Ω)  Ω×10、Ω×1k  DC Voltage (V)  2.5/10/50/250/500  Material (Cover)  ABS  DC Current (mA)  0.5/10/250 
    Rating:
    75%
    from S$17.99
    Min. 2 days
  21. Pocket Scale
    MonotaRO Pocket Scale
    It is possible to measure up to 1000g with a minimum display of 0.1g. Compact and convenient to carry. Equipped with a tare function that can deduct the weight of the container. Precision parts, experiments, etc. * This scale is not a "specified measuring instrument" specified by the Me... Read More
    Mass (g)  141  Operating Temperature Range (℃)  0~50  Power Supply  AAA battery x 2  Minimum Reading (g)  0.1  Weighing Pan Shape  Square  Unit of Weighing 
    Rating:
    88%
    from S$23.99
    Min. 2 days
  22. Precision V-Block A Type Made of Cast Iron
    MonotaRO Precision V-Block A Type Made of Cast Iron
    The special design makes it easy to hold and does not rust easily. It is a machine finish. For marking round bars and raising blocks. * Please do not use it for any other purpose. * Not for precision measurement.
    Material  FC25  Type  Type A 
    Rating:
    89%
    from S$52.99
    Min. 2 days
  23. Vernier Calipers
    Shinwa Rules Vernier Calipers
    Outer diameter measurement, inner diameter measurement, depth measurement, and step measurement are possible. Comes with a fine feed function. Calipers used for various dimensional measurements * Depending on the delivery location, the delivery date may be postponed and additional shipping charge... Read More
    Material  Stainless steel  Depth bar (Yes / No)  Included 
    Rating:
    93%
    from S$64.99
    Min. 2 days
  24. Loupe
    MonotaRO Loupe
    High quality colorless lens. It has a wide field of view by suppressing each aberration as much as possible. For inspection of negatives and positive films, etc. * Do not use for anything other than its intended purpose.
    Material (Lens)  Green glass 
    Rating:
    86%
    from S$15.99
    Min. 2 days
  25. Electroscope
    MonotaRO Electroscope
    ●The operating voltage range is up to 1000V. ●When the voltage is detected, the LED lamp will light up and the buzzer will sound. -With ON/OFF switch *Always check the voltage detector with a known source before detecting. *When inserting the battery, be careful not to bend the internal electrode... Read More
    Frequency (Hz)  50/60  Power Supply  AAA batteries x 2  Material (Cover)  ABS  Working Voltage Range  AC70~1000V 
    Rating:
    78%
    from S$22.99
    Min. 2 days
  26. No Touch Timer Hand Wash Duty
    SATO KEIRYOKI MFG No Touch Timer Hand Wash Duty
    Since the start button is non-contact type, you can start and stop the timer just by holding your hand over it. It is hygienic because it can be used without touching it. The sensing distance is within 3 cm. When the time comes, a sound will be heard for 5 seconds and the time will automatically ... Read More
    Material  ABS resin  Mass (g)  110 (including batteries)  Power Supply  3 x AAA (15V)  Display Part  LCD 2-digit digital display  Display Format  Digital  Timer Setting Time  5 to 90 seconds  Installation  Stand, magnet  Timer Setting  Every 5 seconds  As ONE Part Number  2-8966-01  Countdown function  ○  Repeat function  ○  Non-contact support  ○ 
    Rating:
    80%
    from S$38.99
    Min. 2 days
  27. A Type Thickness Gauge
    SHIM & GAUGE A Type Thickness Gauge
    Shape 
    Rating:
    89%
    from S$4.99
    Min. 2 days
  28. Dial Gauge
    MonotaRO Dial Gauge
    A standard dial gauge can measure up to 0.01 mm. A flat back lid and a back lid with ears are included. Displacement measurement of flat surface unevenness, shaft runout, squareness, etc. * Do not use for any other purpose.
    Mass (g)  150  Operating Temperature Range (℃)  0~40  Scale  ±0~100  Measuring Force (N)  1.5 or less  Contact Diameter (Φmm)  2.5  Stem Diameter (Φmm)  Return Error (μm)  Repeatability (μm)  Back Plate Specification  Flat (back lid with ears included) 
    Rating:
    82%
    from S$34.99
    Min. 2 days
  29. Pitch Gauge
    MonotaRO Pitch Gauge
    You can easily measure the pitch just by hitting the screw thread! Gauge that measures the pitch of ordinary screws * After use, wipe off any dirt and apply oil to store.
    Material  SUS430 
    Rating:
    90%
    from S$14.99
    Min. 2 days
  30. Stopwatch
    CITIZEN Stopwatch
    Continuous measurement is possible up to 9 hours 59 minutes 59 seconds Minimum measurement unit 1/1000 second display Rainproof type
    Mass (g)  42  Display  FE type liquid crystal display  Resolution  1/1000 sec 
    Rating:
    88%
    from S$32.99
    Min. 2 days
  31. Floatless Level Switch (Compact Plug-in Type) 61F-GP-N*
    OMRON Floatless Level Switch (Compact Plug-in Type) 61F-GP-N*
    Space-saving design suitable for miniaturization of control panel, easy maintenance * Insulation resistance and withstand voltage are values between the power supply terminal and the electrode terminal, between the power supply terminal and the contact terminal, and between the electrode terminal... Read More
    Mass (g)  About 155  Rated Voltage (V)  AC200 (50 / 60Hz shared)  Withstand Voltage  AC2000V 50/60Hz 1min  Insulation Resistance (MΩ)  100 or more (with DC500V mega)  Operation Ambient Temperature (℃)  -10~55  Ambient Humidity to Use  45~85%RH  Allowable Voltage Fluctuation  85 to 110% of rated voltage 
    Rating:
    96%
    from S$149.90
    Min. 4 days
  32. Digital Floor Platform Scale Battery-Powered Steel
    MonotaRO Digital Floor Platform Scale Battery-Powered Steel
    Cost-oriented steel top plate type! Since it is battery operated, it can be used even if there is no outlet nearby. For product measurement work. *This scale is not a "specified measuring instrument" specified by the Measurement Act. Cannot be used for trading or proof. * Please use it ... Read More
    Type  Except for transaction proofing  Operating Temperature Range (℃)  0~40  Power Supply  3 x AA batteries (sold separately)  Accuracy  ±0.06.kg  Material (Shorter Rule)  Steel  Function  Tare, back light, counting function  Unit of Weighing  kg 
    Rating:
    84%
    from S$139.90
    Min. 2 days
  33. Test Indicator (Lever Dial Gauge) TI
    Mitutoyo Test Indicator (Lever Dial Gauge) TI
    It is a product that can use the "re-proofreading service" that allows you to quickly and easily request proofreading and delivery of existing products online. For more information, please check the recalibration service category. * Products with proofreading cannot be canceled after or... Read More
    Rating:
    92%
    from S$159.90
    Min. 2 days
  34. Outer Micrometer
    MonotaRO Outer Micrometer
    It is a standard micrometer. With frame / painting / constant pressure device The measurement surface has a cemented carbide tip. Measurement of outer dimensions. * Please refrain from using it for any other purpose.
    Rating:
    86%
    from S$33.99
    Min. 2 days
  35. Mini magnet holder base
    MonotaRO Mini magnet holder base
    A magnet holder stand that can switch the magnetic force ON / OFF. With screw holes, it is convenient for temporary attachment of instruments and devices. The bottom suction surface is processed into a V-groove shape so that it can be attached to a curved surface. The opposite side of the changeo... Read More
    Material  Neodymium magnet  Mounting Screw Hole Size  M5 x 0.8 thread depth 4.2mm  Magnetic Attraction Force (N [kgf])  400[40] 
    Rating:
    86%
    from S$24.99
    Min. 2 days
  36. Taper Gauge
    MonotaRO Taper Gauge
    For measuring gaps, grooves, hole diameters, etc. * Please note that there will be an error in the hole diameter measurement. * Be careful when handling as the tip is sharp and pointed. * Be careful when handling as the end face is sharp. * Please use gloves when working. * Do not use in places w... Read More
    Material  Stainless steel (SUS420J1)  Mass (g)  11  Surface Treatment  Silver finish 
    Rating:
    81%
    from S$8.39
    Min. 2 days
  37. Marking Needle Pencil Type
    MonotaRO Marking Needle Pencil Type
    [Pencil marking needle] As it is a pencil type knock type, it is portable! The needle tip has a carbide tip, and the needle can be replaced. 【Extra lead】 It is a replacement for the pencil marking needle. * Do not use for anything other than its intended purpose.
    Needle Diameter (Φmm)  1.6  Material (Needle)  Brass / Carbide (tip) 
    Rating:
    75%
    from S$3.89
    Min. 2 days
  38. Bolt / Nut Gauge
    Shinwa Rules Bolt / Nut Gauge
    You can easily check the size of bolts and nuts just by hitting or inserting them. You can measure the length of screws of various shapes. Gauge for measuring bolt and nut dimensions * Never use solvents such as thinner and benzine.
    Included Accessories  With inch / millimeter conversion table  Material  ABS resin  Mass (g)  55  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    67%
    from S$8.69
    Min. 2 days
  39. Pressure Measurement Film Prescale
    Fujifilm Pressure Measurement Film Prescale
    Easily measure pressure balance, distribution and magnitude. Developed using Fujifilm's advanced thin-film coating technology, the entire film is a sensor that detects pressure, allowing you to check the pressure distribution across the entire surface at a glance. It turns red when pressure i... Read More
    Rating:
    100%
    from S$699.90
    Min. 5 days
  40. High 13
    Tajima (TJM DESIGN) High 13
    Standard type with simple functions. Standard type for speedy measurement. JIS 1 grade. * Products with proofreading cannot be canceled after ordering. * For products with calibration documents and traceability system diagrams, we can only accept orders online. * Documents applicable only to prod... Read More
    Type  Free  Mass of Main Unit (g)  65  Material (Case)  ABS resin  Type of Scale  One side  JIS Standard  First grade  JIS Class  JIS Class 1  End Hook  0 point correction moving claw 
    Rating:
    87%
    from S$7.79
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 35850

Set Ascending Direction