Other Measuring Supplies
Other Related Pages
- SATO KEIRYOKI MFG No Touch Timer Hand Wash DutySince the start button is non-contact type, you can start and stop the timer just by holding your hand over it. It is hygienic because it can be used without touching it. The sensing distance is within 3 cm. When the time comes, a sound will be heard for 5 seconds and the time will automatically ... Read MoreMass (g) 110 (including batteries) Dimensions, Width W x Height H x Depth D (mm) 114×62×24 As ONE Part Number 2-8966-01 Power Supply 3 x AAA (15V) TGK Part No. 359-55-43-02 Trusco Part No. 385-9371 Timer Setting Time 5 to 90 seconds Material ABS resin Display Format Digital Timer Setting Every 5 seconds Display Part LCD 2-digit digital display Installation Stand, magnet Repeat function ○ Countdown function ○ Non-contact support ○
- CITIZEN StopwatchContinuous measurement is possible up to 9 hours 59 minutes 59 seconds Minimum measurement unit 1/1000 second display Rainproof typeResolution 1/1000 sec Mass (g) 42 Dimension (mm) 75×60×19 Display FE type liquid crystal display
- A&D 3-Channel Timer (100 Hours Type)100-hour, 3-channel timer Simultaneous setting of 3 types of timer time You can start / stop the set time individually or at the same time. Automatic count-up after the alarm has elapsed Clock calendar mode allows simultaneous display of time and date Magnet, clip, tabletop stand, wall mount, str... Read MoreNumber of Timers 3 Trusco Part No. 451-4734 Dimensions, Width W x Height H x Depth D (mm) 80×70×30 Mass (g) Approximately 85 (including batteries) Display Format Digital Included Accessories Monitor battery, instruction manual Power Supply One AAA battery Count up function ○ Clock Function ○ Multi-channel function ○ Countdown function ○
- Ono Sokki Digital Hand TachometerAdopted a large liquid crystal display in a small and lightweight body (character height 10.5 mm) Can measure in 1r / min units over a wide range from 30r / min to 50000r / min (when one reflection mark is used) It also supports the use of multiple reflection marks, making it possible to measure ... Read MoreStorage Temperature Range (℃) -10~55 Operating Temperature Range (℃) 0~40 As ONE Part Number 1-1024-02 Number of Memory 10 Outer Dimensions (mm) 129×62×26.4 Detection Distance (mm) 20~300 TGK Part No. 919-63-79-10 Power Supply AAA batteries x 3 Mass (g) Approx. 90 (excluding batteries) Light Receiving Element PhototrANSIstor Light Source Red light emitting diode Units of Measurement r/min
- TECLOCK Rubber / Plastic Hardness Meter (Durometer) JIS K 6253 CompliantIt is a measuring instrument that detects the hardness of rubber, sponge, felt, plastic, etc. with extremely high accuracy. It has unprecedented sensitivity and excellent durability. * If you order by cash on delivery, it may be shipped the next day or later. * Products with proofreading cannot b... Read More
- AS ONE Triple TimerSimultaneous start / stop is possible with three independent timers. You can display the current time. It has a count-up function and can be used for applications such as stopwatches.Minimum Setting time 1 second Maximum Setting time 19 hours 59 minutes 59 seconds Dimension (mm) 71×88×24 Power Supply AAA battery x 1 (included for testing) Display Format Digital Countdown function ○ Multi-channel function ○ Count up function ○from S$45.99Min. 2 days
- navis StopwatchComes with a neck strap.Type (2 lap records) As ONE Part Number 8-5960-01from S$29.99Min. 2 days
- ESCO 110x69x16. 5mm multi-function timerMass (g) Approximately 77g (including batteries) Battery Life About 1 year Material ABS resin Display Format Digital Clock Function ○ Dimensions, Width W x Depth D x Height H (mm) 69(W)×16.5(D)×110(H)mm Count up function ○ Countdown function ○ Multi-channel function ○ Power Supply AAA battery x 1 (included)from S$34.99Min. 4 days
- MonotaRO Stopwatch* Do not use for anything other than its intended purpose.Maximum Timing 23 hours 59 minutes 59 seconds Main Unit Dimensions (mm) 79×67×20 Material ABS resin Color Black
- KOBAYASHI (Kobayashi Create) Recording Paper* It is not a genuine product of the manufacturer.
- MonotaRO Hand counterYou can count the number by pressing the button once. For quantity measurement work such as counting, traffic volume, number of visitors, etc. * Please refrain from using it for any other purpose. * Be careful of strong impacts such as dropping.Number of Digits 4 Maximum Display 9999 Mass (g) About 53 Type Hand-held Material Steel
- MonotaRO With hand counterYou can count the number by pressing the button once. For quantity measurement work such as counting, traffic volume, number of visitors, etc. * Please refrain from using it for any other purpose. * Be careful of strong impacts such as dropping.Number of Digits 4 Maximum Display 9999 Mass (g) About 60 Type Mount type Material Steel
- dretec Drip-proof timer with clockA drip-proof type that can be used with wet hands. Easy to set in "10 minutes", "1 minute", and "10 seconds" increments. When you want to use the timer in a place where you can touch it with wet hands, such as in the kitchen. The time can be confirmed with the clock ... Read MoreMaximum Setting time 99 minutes 50 seconds Display Format Digital Waterproof IPX2 Clock Function ○ Countdown function ○
- MonotaRO Ratchet CounterThe mechanical counter connects the counting drive shaft and the driving machine, and integrates and displays the rotation speed and reciprocating motion of the machine. By reciprocating 45 ° from the lever, the number advances by one. For checking the quantity of processed parts. * Please refrai... Read MoreMass (g) 116 Hole Diameter (Φmm) 4 Digit Size (mm) 4.5 Digit Number of Display 5 Size (mm) 77 width x 47 depth Color Black Direction of Rotation Right axis forward rotation Material Steel
- NOA Timer with volume switching functionLarge, small, and mute 3 patterns of alarm count up / down timer With magnet, hook, and stand, you can freely set the installation location. Maximum setting 99 minutes 50 seconds (up), 99 minutes 59 seconds (down) With time display / repeat / pause function The light flashes when mute is set.Dimension (mm) 65×95×20 Mass (g) 68 Battery AAA × 2 Material ABS resin Display Format Digital
- Shinwa Rules Tally counterYou can count the numbers with the push of a button. It is used by attaching it to a table with screws. Tally counter used to count the number of visitors and traffic volume * Be careful of strong impacts such as dropping.Measuring Range 0 to 9999 (4 digits) RoHS directive (corresponding to 10 substances) Correspondence
- OHM ELECTRIC Digital Kitchen TimerCompact and space-saving digital timer with magnet Equipped functions: 100 minutes counter, timer (countdown), stopwatch (countup), repeat, auto power off (about 5 minutes) Color is whiteOperating Temperature Range 0~40℃ Mass (g) 27g (including battery) Dimensions, Width W x Height H x Depth D (mm) 53×70×8.8 Material ABS resin Alarm About 60 seconds Display Format Digital Suitable Battery LR1130 x 1 (built-in) Installation magnet Countdown function ○ Repeat function ○ Count up function ○
- SATO KEIRYOKI MFG No Touch TimerBy adopting a non-contact sensor (switch), you can start the timer by holding your hand without touching the main body. (Utility model acquired) If you hold your hand over the non-contact sensor while the alarm is operating, the alarm will stop without touching the main unit. The sensitivity (sen... Read MoreMass (g) 130g (including battery) Power Supply 3 x AAA batteries Trusco Part No. 823-0870 Material (Main Unit) ABS resin Battery Life About 1 year using 50 times a day Alarm Alarm sound: Selectable from 3 types Dimension (mm) Approx. (W) 120 × (H) 62 × (D) 22mm Display Format Digital Waterproof Drip-proof type Sensor Non-contact sensor timer Only for countdown Countdown function ○ Non-contact support ○
- A&D Buzzer Sound Hi / Low Switchable Large LCD Timer (20 Hours Type)20-hour timer Stainless steel top Large LCD display makes it easy to read Alarm volume (large / small) can be switched Repeat (repeat) function, pause (pause) function Magnet, desktop stand, wall-mounted 3 ways of use are possible For making bread, sweets, cakes, cooking, managing food taste time... Read MoreNumber of Timers 1 Power Supply 2 LR44 button batteries Dimensions, Width W x Height H x Depth D (mm) 79×79×18 Trusco Part No. 838-3679 Battery Life About 1 year Mass (g) Approximately 80 (including batteries) Display Format Digital Included Accessories Monitor battery, instruction manual Installation Wall hanging, stand, magnet Count up function ○ Countdown function ○ Repeat function ○
- Nippon Kinzoku Electroforming Surface Roughness Standards SetThis instrument is made by selecting the most frequently used part of the various processing methods and roughness shown in the JIS standard, and compares and measures it with the actual product. Roughness of finish, roughness check during workMain Unit Dimensions (mm) 182×47×2.8 Dimension (mm) 21 x 11 (standard piece) Mass (g) 67.5/1 sheet
- OPPAMA INDUSTRY Pulse Engine Tachometers PET-304Only for gasoline engines. You can measure the number of revolutions just by bringing it close to the spark plug cord. You can measure in the 1.2m range by using the attached antenna lead wire. It can measure 2-stroke 1-cylinder, 4-stroke 2-cylinder and 1-turn 1-ignition. Maintenance of gasoline ... Read MoreMaterial (Body / Case) ABS Measuring Range (min-1 [rpm]) 100~20000 Resolution 10rpm Detection Distance (mm) 150 Battery Life (hours) 20000 Dimensions, Width W x Depth D x Height H (mm) 60×12.5×42 Included Accessories Antenna lead wire Power Supply Built-in battery (not replaceable) Measurement Accuracy (r/min) ±10
- PEARL METAL Vibration timerIt is a timer that tells you with a vibrator. With a strap that can be hung from the neck. With the changeover switch, you will be notified with 3 types of sound only / sound and vibe / vibe only.Dimensions, Width W x Depth D x Height H (mm) 25×20×110 Mass (g) 45 Display Format Digital Installation Strap attached Countdown function ○ Count up function ○
- Ono Sokki Reflective Mark (Non-Contact Type)As ONE Part Number 1-1024-17 Size 12mm square x 25 pieces TGK Part No. 919-63-79-11 Suitable for For HT-4100, 4200
- GREAT TOOL Telescopic inspection mirrorYou can freely change the angle of the mirror. Since the handle expands and contracts, you can easily see it in a mirror even in difficult-to-see places such as the back and narrow places. The LED light makes it easy to see even in dark and narrow places. As it is telescopic, it is convenient to ... Read MoreSpecification Telescopic Mirror surface dimensions (mm) H 64 x W 42 Suitable Battery CR2032 x 2 Range of Length Adjustment 285~875from S$22.99Min. 2 days
- MonotaRO Series counterYou can count the number by pressing the button once. We have a lineup from 3 to 6 stations, and you can count efficiently. For quantity measurement work such as counting, traffic volume, number of visitors, etc. * Please refrain from using it for any other purpose. * Be careful of strong impacts... Read MoreNumber of Digits 4 Mounting Hole Diameter 4mm x 4 locationsfrom S$55.99Min. 2 days
- SEIKO Stopwatch Solar StandardMinimum Timing 1/100 (second) Maximum Timing 100 hours Waterproof 5 ATM water resistant Mass (g) 61 Dimensions, Height x Width x Thickness (mm) 73×61×23
- azbil (Yamatake Corporation) Recording Paper for MeasurementFolding chart paper for hybrid recorder
- MonotaRO Digital tachometerCompact and lightweight size, convenient style to carry with integrated case Non-contact, safe and easy measurement included Reflective tape for measurement With data hold function to fix measured value Maximum / minimum / average value display function Forgot to cut With auto power off function ... Read MoreMeasuring Range 100~99999rpm Sampling 2 times / sec Suitable Battery 2 x AAA (1.5V) batteries Dimensions, Width W x Height H x Depth D (mm) 50.9×132.9×24.7 Measuring Accuracy ±(0.02%rdg+1dgt)
- Ono Sokki Digital Hand TachometerEasy-to-use, high-performance compact handy type contact digital tachometer. You can obtain the measurement result of r / min direct reading on the display at hand just by holding it with one hand and lightly pressing it against the rotating shaft. It is also possible to measure line speeds of m ... Read MoreStorage Temperature Range (℃) -10~+55 Operating Temperature Range (℃) 0~+40 As ONE Part Number 1-1024-01 Outer Dimensions (mm) 172×38.5×63 Digit Number of Display 5-digit Type of Display 7 segment LCD Mass (g) Approx. 160 (excluding batteries)
- KOKUSAI CHART Recording PaperEquivalent to Yokogawa Electric recording paper B9565AW * Product standards and specifications (capacity, packaging, raw materials, country of origin, etc.) may change due to manufacturer's circumstances, and the product information actually delivered may differ from the product information o... Read MoreRoHS directive (corresponding to 10 substances) Correspondencefrom S$119.90Min. 2 days
- Line Seiki Continuous CounterThe stand-mounted type has a lineup of up to 10 series, and all counts return to 0 at the same time by turning the reset knob once. It is used for traffic volume surveys, product inspections, classification and counting of data, etc. * If you order by cash on delivery, it may be shipped the next ... Read MoreMounting Hole Diameter 3.5mm x 4 locations
- OHM ELECTRIC Digital Kitchen TimerCompact and space-saving digital timer with magnet Equipped functions: 100 minutes counter, timer (countdown), stopwatch (countup), repeat, auto power off (about 5 minutes) Color is blackOperating Temperature Range 0~40℃ Mass (g) 27g (including battery) Dimensions, Width W x Height H x Depth D (mm) 53×70×8.8 Material ABS resin Alarm About 60 seconds Display Format Digital Suitable Battery LR1130 x 1 (built-in) Installation magnet Repeat function ○ Count up function ○ Countdown function ○
- SATO KEIRYOKI MFG Digital stopwatchDrip-proof specifications that can be operated even with wet hands (compliant with JIS C 0920 IPX2) With clock (12 / 24H), alarm, time signal, split time, dual timeDimensions, Width W x Height H x Depth D (mm) 62×76×19 Mass (g) Approximately 41 (including batteries) Material ABS resin Waterproof IPX2 compliant
- Yamamoto Scientific Tool Laboratory HRC Hardness Test Block* Products with proofreading cannot be canceled after ordering. * Documents applicable only to products that include (with a set of ISO documents) and (with JCSS calibration certificate) in the part number are attached. * Please specify the address to be written on the documents.Finish Buffing (measurement surface) Hardness HRC JIS Standard JIS B7730 Shape (mm) Φ64×15
- dretec Digital Timer "Pocketty"Simple and compact. It's big enough to fit in your pocket. With strong magnet, with repeat function, with count-up function Thin and compact size digital timerMass (g) 25 Dimensions (D x W x H) (mm) 9×53×70 Material ABS resin Included Accessories Battery (LR1130 x 1) Display Format Digital Specification Maximum set time 99 minutes 59 seconds
- SANSYO Counting machine with magnetWith a strong magnet on the back side, you can freely fix it wherever you like, and you can use as many as you need side by side. If it is not a metal surface, it can be fixed with double-sided adhesive tape.Display 4 digits Material (Case) Stainless steel
Filter by categories