All Category

Special Tools for Imported & Japanese Car

View : Grid List
Filter

Items 1 - 40 of 598

Set Ascending Direction
  1. Valve pressure spring inserter & remover
    JTC Valve pressure spring inserter & remover
    Genuine Part No.  119390  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$319.90
    Min. 6 days
  2. Subframe bush remover & inserter
    JTC Subframe bush remover & inserter
    You can work without using a press.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1,599.00
    Min. 6 days
  3. Front & rear suspension bush extractor & inserter
    JTC Front & rear suspension bush extractor & inserter
    It can be done on the car without using a press. Used to replace the suspension bush.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$769.90
    Min. 6 days
  4. Straight Edge
    MonotaRO Straight Edge
    Since both sides are polished, it can be used without worrying about the direction. Comes in a special case for convenient storage. For measuring engine head distortion and cylinder block intake manifold flatness *Please do not use for anything other than its intended purpose. *Both sides (2 side... Read More
    Parallelism (μm)  50 (for the total product length)  Material  S50C (quenched)  Mass (kg)  2.4  Outer Dimensions, Length L x Width W x Height H (mm)  600×16×36  Hardness  HRC34~38 
    Rating:
    88%
    from S$119.90
    Min. 2 days
  5. Connector pliers
    JTC Connector pliers
    For unlocking and pulling out the connector that is difficult to remove.
    Overall Length (mm)  215  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    93%
    from S$58.99
    Min. 2 days
  6. Fuel hose connector pliers
    MonotaRO Fuel hose connector pliers
    A special tool for removing the fuel hose and fuel tank connector. The vented tip allows the connector to be removed without interfering with the fuel hose. For removing fuel hose and fuel tank connector. * Depending on the type of connector, it may not be available. * Some models may not be comp... Read More
    Mass (g)  270  Overall Length (mm)  225  Maximum Jaw Opening (mm)  110  Material  Carbon steel (main body), PVC (grip)  Tip size (mm)  6.2×4.3  Tip Length (mm)  120 
    Rating:
    68%
    from S$44.99
    Min. 2 days
  7. Front wheel nut socket
    MonotaRO Front wheel nut socket
    Front hub nut with 4 holes Detachable bearing nut. For attaching and detaching bearing nuts * Do not use for anything other than its intended purpose
    Dimension (mm)  (From pin center to center) 50  Square Drive (mm)  12.7  Mass (g)  420  Pin Diameter (Φmm) 
    Rating:
    80%
    from S$59.99
    Min. 2 days
  8. Pentagon socket
    MonotaRO Pentagon socket
    You can tighten and loosen the pentagon bolts * Please do not use for any other purpose
    Socket Size (mm)  10  Square Drive (mm)  12.7  Overall Length (mm)  36.8  Mass (g)  52  Material  Chromium vanadium steel 
    Rating:
    100%
    from S$28.99
    Min. 2 days
  9. Fuel pump lock ring tool
    MonotaRO Fuel pump lock ring tool
    A variable size wrench used for removing and installing the fuel pump lid (lock ring retainer). Since the size can be adjusted, it can be used for many car models with a wide range of adaptive sizes. Securely fix the lock ring with three claws. For attaching / detaching the lock ring (lid) of the... Read More
    Suitable Size (mm)  89~165  Wrench Size (mm)  16 
    Rating:
    70%
    from S$76.99
    Min. 2 days
  10. Tire stone remover
    KTC Tire stone remover
    You can remove stones efficiently. The specially developed rounded tip does not damage the tire.
    Overall Length (mm)  140  Handle Diameter (Φmm)  10  Mass (g)  70 
    Rating:
    85%
    from S$18.99
    Min. 2 days
  11. 5 socket
    JTC 5 socket
    A special tool for removing fuel pumps for cars.
    Square Drive (mm)  12.7  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    72%
    from S$38.99
    Min. 2 days
  12. Bearing nut socket
    JTC Bearing nut socket
    For Toyota only
    Square Drive (mm)  12.7  Pin Diameter (Φmm)  Dimension PCD (mm)  60  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$119.90
    Min. 2 days
  13. Socket set for VW / AUDI
    JTC Socket set for VW / AUDI
    Square Drive (mm)  12.7  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    90%
    from S$149.90
    Min. 2 days
  14. Fuel hose pliers
    JTC Fuel hose pliers
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$46.99
    Min. 2 days
  15. Crankshaft lock pin
    JTC Crankshaft lock pin
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$66.99
    Min. 2 days
  16. Shock absorber socket
    JTC Shock absorber socket
    Used when removing the shock absorber. It is necessary to remove the front struts of Golf 4, 5, 6 etc. from the wheel bearing housing.
    Square Drive (mm)  12.7  Main Compatible Genuine Part No.  3424  Tip Size (mm)  5.4X8  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$43.99
    Min. 2 days
  17. Camshaft timing tool
    JTC Camshaft timing tool
    Used for positioning the camshaft.
    RoHS directive (corresponding to 10 substances)  Correspondence  Genuine Part No.  T10414 
    Rating:
    100%
    from S$67.99
    Min. 2 days
  18. Fuel hose pliers
    JTC Fuel hose pliers
    For removing fuel hose and fuel tank connectors
    Overall Length (mm)  220  Mass (g)  255  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$79.99
    Min. 2 days
  19. Fuel cap wrench
    KOTO Fuel cap wrench
    The tank cap used for the fuel pump of ordinary cars and the fail gauge of heavy trucks can be easily attached and detached.
    Mass (kg)  0.517  Suitable Diameter (Φmm)  34~168  Case Dimensions (mm)  260×20×20 
    Rating:
    100%
    from S$129.90
    Min. 2 days
  20. Fuel cap wrench
    NIPPEI KIKI Fuel cap wrench
    Thread Diameter (mm)  17  Trusco Part No.  835-5000  Applicable Range (mm)  89~170  Mass (g)  950  Suitable Model  Normal car-large car  Main Unit Size (mm)  Φ140×82 
    from S$129.90
    Min. 2 days
  21. Fuel tank cap wrench
    JTC Fuel tank cap wrench
    Used for attaching and detaching the fuel tank cap.
    Square Drive (mm)  12.7  Wrench Size (mm)  21  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$169.90
    Min. 2 days
  22. Spark plug cable puller
    JTC Spark plug cable puller
    Overall Length (mm)  264  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$79.99
    Min. 2 days
  23. Wheel lock socket for BMW
    JTC Wheel lock socket for BMW
    Genuine lock bolt adapter set
    Hex Width Across (mm)  17  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    85%
    from S$219.90
    Min. 2 days
  24. Triple square socket set
    JTC Triple square socket set
    Used for attaching and detaching the drive shaft.
    Square Drive (mm)  12.7  Overall Length (mm)  120  RoHS directive (corresponding to 10 substances)  Correspondence  Size  M8・M10・M12 
    from S$119.90
    Min. 2 days
  25. Wheel center rocket
    KOTO Wheel center rocket
    ISO standard wheel center out support tool. Wheels can be easily centered, which has become difficult due to the adoption of ISO wheels for heavy-duty trucks. For preventing damage to hub bolts when mounting wheels.
    Mass (kg)  0.395  Case Dimensions (mm)  160×90×30  Applicable Hole Diameter (Φmm)  26 (wheel)  Suitable Screw  M22 x P1.5 (right-hand thread) 
    from S$339.90
    Min. 2 days
  26. Crank pulley fixing wrench
    JTC Crank pulley fixing wrench
    It can be used for fixing and attaching / detaching the crank pulley.
    Square Drive (mm)  12.7  Teeth Spacing  54~120mm  RoHS directive (corresponding to 10 substances)  Correspondence  Bolt Diameter  M6 1.0 40mm×2 M8 1.25 60mm×2 
    from S$219.90
    Min. 2 days
  27. Compressor clutch pulley wrench
    JTC Compressor clutch pulley wrench
    For GM R-4
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$67.99
    Min. 2 days
  28. Center lock nut socket
    JTC Center lock nut socket
    Impact wrench cannot be used
    Square Drive (mm)  19  Material  Aluminum  RoHS directive (corresponding to 10 substances)  Correspondence  Manufacturer  Porsche 
    from S$339.90
    Min. 6 days
  29. Replacement tip hook
    JTC Replacement tip hook
    For tip replenishment of JTC2503
    RoHS directive (corresponding to 10 substances)  Correspondence  Specification  M12XP1.5 (replacement tip hook) 
    from S$28.99
    Min. 2 days
  30. Front wheel nut socket
    JTC Front wheel nut socket
    Front hub nut with 4 holes Detachable bearing nut
    Square Drive (mm)  12.7  Genuine Part No.  43461-82CB0・43461-60A01  Pin Diameter (Φmm)  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    84%
    from S$139.90
    Min. 6 days
  31. Flywheel lock tool
    JTC Flywheel lock tool
    Overall Length (mm)  250  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$79.99
    Min. 6 days
  32. Fuel tank cap wrench
    JTC Fuel tank cap wrench
    Used to remove the fuel tank cap.
    Range to Use (mm)  113~185  Square Drive (mm)  9.5  RoHS directive (corresponding to 10 substances)  Correspondence  Suitable for  German cars in general 
    Rating:
    100%
    from S$149.90
    Min. 6 days
  33. Alternator pulley socket set
    JTC Alternator pulley socket set
    A must-have item for belt replacement!
    Square Drive (mm)  12.7  Specification  17mm wrench used  Outer Diameter  19mm / 33 mountain  Main Compatible Genuine Part No.  3400  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$76.99
    Min. 2 days
  34. Camshaft pulley fixing wrench
    JTC Camshaft pulley fixing wrench
    Used to fix the pulley when replacing the timing belt.
    from S$119.90
    Min. 6 days
  35. A / C compressor belt inserter
    JTC A / C compressor belt inserter
    Easy to attach the belt !!
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    70%
    from S$139.90
    Min. 2 days
  36. Thin box wrench
    HASCO Thin box wrench
    It exerts its power in a narrow space around the lower ball joint. It is a long type (480 mm) with strong force.
    Specification  Diagonal size: 17mm/19mm  Dimension A (mm)  480  Dimension B (mm)  26  Thickness (mm) 
    from S$389.90
    Min. 6 days
  37. 5PCS diesel injection pump socket
    JTC 5PCS diesel injection pump socket
    For special bolts of injection pumps
    Set Contents  (1~3)Bosch、(VE・4)Bosch、(TDI・5)BoschCR  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$169.90
    Min. 6 days
  38. Muffler hanger tool
    KOTO Muffler hanger tool
    It is very convenient for removing the two-hole hanging rubber muffler used for domestic and foreign cars. This type of hanging rubber has a bulging stay tip to prevent it from coming off, so it takes a lot of work time unless a special tool is used.
    Jaw Opening Width (mm)  0~88  Case Dimensions (mm)  380×80×65  Mass (kg)  0.926  Overall Length (mm)  360 
    from S$129.90
    Min. 5 days
  39. Dedicated wrench for air dryer filter
    KOTO Dedicated wrench for air dryer filter
    A dedicated wrench for replacing the cartridge filter of the air dryer used in medium-sized and large vehicles.
    Suitable Diameter (Φmm)  130~140  Square Drive Size  (Wrench) 12.7  Band Width (mm)  76 
    from S$189.90
    Min. 6 days
  40. Head bolt socket
    TONE Head bolt socket
    The head bolt socket is a dedicated attachment / detachment socket for the cylinder block and gasket of the engine and the bolt that fixes the cylinder head.
    from S$33.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 598

Set Ascending Direction