Car Maintenance Auxiliary Supplies
Maintenance aids are tools that play an auxiliary role in using tools for car maintenance. For example, in order to perform maintenance under a car body, you can only work under the car. A tool that is useful at that time is a creeper, that is, a bed. The material and structure have been devised so that you can work under the car while sleeping on this bed, making it easy to work even for a long time. Some work chairs allow you to sit and work on similar tools. In addition, a cover that covers the vehicle body and chairs so as not to get dirty with paint is also a maintenance aid. In addition, maintenance aids include a set of privateers that can be used to adjust and adjust the V-belt and when removing and installing parts.
Other Related Pages
MonotaRO Front Seat Cover Made of Polyethylene 0.015mmConvenient to cure your seat with a poly seat cover. It is easy to use because it can be taken out one by one with a pop-up type. For automobile maintenance, sales, exhibition cars, etc. * Cannot be used for the arm part. * This product is disposable, so please do not continue to use it. * Please... Read MoreMaterial LLDPE- MonotaRO Floor Sheet Made of Polyethylene for FrontThe poly foot sheet prevents the floor mat from getting dirty. As it is a roll type, it is easy to take out. For automobile maintenance, sales, exhibition cars, etc. *This product is disposable, so please do not use it continuously. *Please use it as a temporary curing sheet. *Because it is made ... Read MoreMaterial LDPE
- MonotaRO Non-Slip Seat Cover Polyethylene Front 0.03mmPrevents stains on the seat during test rides, maintenance and repairs. The back surface is treated with anti-slip treatment to prevent slippage and improve work efficiency. It is convenient because it can be easily taken out one by one with a pop-up type. For automobile maintenance, sales, exhib... Read MoreMaterial Polyethylene
- MonotaRO Service CreeperIt is a resin creeper with good holdability. Equipped with 6 flexible casters for easy movement. * When not in use, store in a safe place. *Store in an upright position. *Keep out of reach of children. * Make sure the car is jacked up and secured. *Be sure to check the safety of the work before u... Read MoreCaster 6.0
- JTC Valve CompoundRoHS directive (corresponding to 10 substances) Correspondence
- KTC Handy long barIt is a penetration type. Pry: Adjust the tension of V-belt and flat belt. Expand: The task of removing the mission from the engine. / Separation work of strut and lower arm. Pull out: The work of pulling out the drive shaft from the mission (diff). Removal work of oil seals, gears, bearings, etc.Mass (g) 800from S$129.90Min. 2 days
- MonotaRO Foot mat paper* Do not use for anything other than its intended purpose.Material Paper Mass (g/sheet) 20
- MonotaRO Work chair with casters and resin trayIt is easy to move even while sitting on the free casters. In addition, a resin tray divided into three parts is attached under the seat, which is useful for storing parts and screws. The robust iron frame convinces professionals. *Do not use for anything other than its intended purpose. *The loa... Read MoreCaster Diameter (Φmm) 60
- MonotaRO Non-Slip Seat Cover Made of Polyethylene 0.03mm Roll Type for FrontPrevents stains on the seat during test rides, maintenance and repairs. The back surface is treated with anti-slip treatment to prevent slippage and improve work efficiency. It can be conveniently used by hanging the roll on the installation table and easily cutting it one by one. (notched) For a... Read MoreMaterial Polyethylene
- MonotaRO Urethane knee padIt is designed to be long so that you can hit both knees. For knee pads during car maintenance work * Do not use for anything other than its intended purpose.Material EVA Mass (g) 200
- TRUSCO Resin magnet can holderCan products up to 80 mm in diameter can be stored. You can put work supplies such as spray-type lubricants and parts cleaners, and you can also use drinks such as canned juice and PET bottles. A powerful magnet that can be attached to a steel surface for use. Since the handle can be escaped from... Read MoreMass (g) 140 2018 Trusco page 1 1181
- MonotaRO Steel pipe type with creeper reclining functionCompared to conventional products, the cushioning properties are outstanding, leading to improved work efficiency, and there is no need to attach casters at the time of purchase. It is a creeper that can adjust the position of the headrest in 4 stages so that you will not get tired even if you wo... Read MoreCaster Diameter (Φmm) 62.5
- Kikuchi3 Chemistry Tire storage bag with gussetMade of high density polyethylene material, it has considerable strength. It is considerably stronger than a general plastic bag and you do not have to worry about it breaking or tearing. You can temporarily store studless tires and new spare tires. Since the bag has a "gusset", it is e... Read MoreMaterial HDPE high density polyethylene
- MonotaRO O-ring seal pick tool setFor removing seals such as O-rings, oil seals, and dust seals. For removing automobile interior parts. * Please do not use for any purpose other than the original purpose or beyond the ability. * Do not use on objects with electricity as there is a risk of electric shock. * When working, check th... Read MoreShank Diameter (Φmm) 3 Material (Shaft) CR-V Hardness HRC 48 Material (Clip) PP+TPR
- MonotaRO Pry Bar Through Type Rubber GripIt is a penetration type privater set that comes in an easy-to-use size. The rubber grip makes it easy to apply force when gripping, and the penetration type allows you to hit with a hammer. In addition, the body is a square type so that it can sufficiently handle work such as scraping work and w... Read MoreMass (g) 140、320、520、680
- MonotaRO O-ring oil seal pickA convenient pick tool set that allows you to remove small O-rings and stickers. You can choose from four types of tip shapes to use according to your application. * Please do not use for any purpose other than the original purpose or beyond the ability. * Do not use on objects with electricity a... Read MoreShank Diameter (Φmm) 1.5 Material (Shaft) SUS304 Material (Clip) PP
- MonotaRO Magnet hanger both sidesCan be adsorbed on all metal products and tools. It can be easily mounted on a wall with the attached screws 2pcs. Also, since magnets are included on both sides, if it is light, it can be easily used by simply adsorbing it to the metal surface without screwing. It is the best one for sawmills, w... Read MoreMass (g) 850 Magnetic Attraction Force (N [kgf]) Within 100 [10]
- MonotaRO Urethane Mat FoldingAs it is foldable, you can freely adjust the size according to your needs. It is very convenient when you work by sneaking under the car body. For work on low and narrow work sites or on cold and hard floors. * Do not use in places with high temperature and humidity and moisture. * Do not leave t... Read MoreMaterial EVA
- MonotaRO Flex priv telescopic with angle adjustmentA convenient privater that can adjust both length and angle. It can be used even in narrow spaces, and can be expanded and twisted in various situations. For automobile repair, metal plate processing, machine repair, etc. * Do not use for any purpose other than its intended purpose.Mass (g) 790
- KTC Service CreeperA service creeper with excellent workability that uses a pipe frame and high-density cushion designed so that it does not interfere with the shoulder area. The rubber 6-wheel free caster adopts Φ75, making it smoother and more durable.Number of Casters 6
- OHTSUKA BRUSH MFG. Floor matVarious car-specific covers that do not stain the inside or other parts of the car during vehicle sheet metal or painting Curing cover for floor matsMaterial Semi-bleached kraft paper
- MonotaRO Rolling chair with storageIt is a chair that makes work in a low posture such as welding comfortable. Tools can be stored in various places, making it very convenient and improving work efficiency. It weighs about 2 kg, so it is convenient to carry. *Do not use for anything other than its intended purpose. *The load capac... Read MoreColor Body / Caster: Black seat lid: Red Type Work chair
- TRUSCO Magnet side trayA rubber cover is attached to the bottom of the sticking surface to prevent scratches and slippage. The magnet has a rubber coating that makes it difficult to damage the object. The tray has a depth of 31 mm and a depth of 115 mm.Material Body / steel, magnet / ferrite
- SK (Niigata Seiki) Magnet tool holderEasy organization of tools with the power of a magnet Even heavy or large objects can be stabilized by using two. For storing and organizing toolsIncluded Accessories 4 mounting screws Mass (g) 875 Attracting Force (N) Up to about 117 Diameter of Suction Surface (Φmm) 400×20
- ACCS Worksheet Adjust typeSince the seat rotates, it is useful for detailed work.Material (Main Unit) Steel Mass (g) About 4800 Material (Caster) Polypropylene, steel Material (Seat) Wood, PVC, polyurethane Seat Diameter (Φmm) 300
- TRUSCO Magnet power beltStrong magnets are included on both the front and back sides. (Anisotropy) Since it is a flexible belt type, it can be cut with scissors or a cutter. For holding tools. For posting on boards and panels. For bonding steel to steel.Material Rubber magnet (anisotropic)
- trad Magnetic trayIt sticks tightly with a strong magnet! For sorting and organizing frequently used tools and parts!Material ABS
- OHTSUKA BRUSH MFG. Seat Cover 0.03mm 100 SheetsVarious car-specific covers that do not stain the inside or other parts of the car during vehicle sheet metal or painting. It is in a roll shape, and you can take 100 sheets in one roll (with a cut) Curing cover for front seatsMaterial Polyethylene
- MonotaRO Caster for Mechanics CreeperCasters exclusively for Monotaro's service creepers (M6803B / M6802-2). As a replacement caster for Monotaro's service creeper * Can only be used with Monotaro's service creepers (M6803B / M6802-2). * Please note that the casters differ depending on the product number. * Please do not... Read More
- MonotaRO Private set Non-penetrating typeIt can be used when a large amount of force is required, such as adjusting the belt or prying when attaching or detaching the mission. In addition, since it has a tip angle, it is a set of private bars that can be used for various purposes such as tapping, raising, and spreading. When adjusting t... Read MoreMaterial Carbon steel
- SOROAD Multi Tool HoldersYou can put a tool between clips or insert it to store it! * Please use by fixing the main body to the wall with screws.Material Body: Aluminum alloy, Clip: PP
- KTC Wrench Rack (for Spanner / Box Wrench / Combination Wrench)Cleanly stores tools in tool boxes and cabinets. You can freely rearrange the base and arrange the rack pins, so you can organize them to your liking. The material is PP resin. It is lightweight and has excellent chemical resistance. It is also ideal for shortening maintenance efficiency and appe... Read MoreMass (g) 200
- MARUENU Nylon storage bag for tiresMade of high density polyethylene material, it has considerable strength. It is considerably stronger than a general plastic bag and you do not have to worry about it breaking or tearing. You can temporarily store studless tires and new spare tires. * The colors on the screen may look slightly d... Read MoreMaterial HDPE high density polyethylene
- TRUSCO Magnet tool holderNot only can tools be hung with a strong magnetic force, but they can also be removed and carried as they are. The suction surface is flat and comes with a soft rubber that is kind to the object. Attach it to a tool wagon, cabinet, etc. with a magnet to organize tools, etc.Mass (g) 530 Attracting Force (N) 58
- SIGNET Urethane knee padWork can be done at any work site without damaging the kneeMaterial EVA
- TRUSCO Resin magnet trayWith a strong magnet, you can safely and securely attach it to OA furniture and machinery to manage parts and tools. By using it by color, it is convenient for parts management by size and type. Work parts and tools can be stored together. For adsorption management of parts and tools.
- BONDHUS Bondex caseThe size is clearly stated so you can see at a glance what wrench you need. Since the case has a lock function, the wrench will not fall even if you shake it upside down. When removing the wrench from the case, you can easily remove it by twisting it. For storing hexagonal L-wrench.RoHS directive (corresponding to 10 substances) Correspondence
- TONE Can holder (Magnet type)Can store 3 general spray cans (Φ55mm). It can also be used as a screwdriver stand using the hole on the bottom. (Some drivers cannot be used) Since the fixing method is a magnet, it can be removed. * Do not place heavy objects that exceed the load capacity. * Do not use the tool for any purpose ... Read MoreMaterial Steel Color Black Withstand Load N (kgf) 20
- TONE Parts tray with magnetMade of stainless steel, it is resistant to rust. The magnet is as strong as 1000 gauss. *Do not use the tool for anything other than its intended purpose. *Do not use in places where magnetism may adversely affect the product.
- MJ Tire replacement position stickerOptimal for changing from summer tires to winter tires Normal tires and studless tire patterns are attached with specially processed adhesive tape and arranged in order of work process
Filter by categories
