A socket tool that is indispensable for motorcycle maintenance. At Daytona, we have a lineup centered on the size required for domestic motorcycles, which you can use with confidence at a low price.
Since normal compressed air is used, brake bleeding and air bleeding can be easily performed by one person. Even if you don't have a dedicated brake oil tank cap, you can work quickly and cleanly. Old oil can be drained or completely replaced with new oil without leaking fluid. With silencer.... Read More
Material (Bottle) PE, (nozzle) rubber Connector Diameter (Trigger) PT1 / 4 inch Suitable Air Pressure (MPa) 0.5~0.8 Applicable hose inner diameter x outer diameter (Φmm) 4×7 Hose Length (m) About 1
In addition to the handle of the main body, you can also work with a 12.7 mm (1/2) socket handle and a 21 mm wrench, which is very convenient.
It is used to expand (return) the piston of the brake caliper without damaging it when replacing the brake pads.
* Cannot be used for calipers that also s... Read More
Square Drive (mm[inch]) 12.7[1/2] Operation Distance Range 14~85mm Width Across Flats (mm) 21 Plate Dimensions (mm) 50×60×6 Material (Main Unit) Carbon steel
Rust and sticking dirt in the groove of the piston seal of the caliper, which was not possible with ordinary tools, can be easily scraped off. Also, since there are 4 types of blades, it can be used properly according to the shape of the groove.
For removing rust and dirt on the piston seal
* Bec... Read More
Mass (g) 48 Material K5 steel (cast nickel alloy) Width (mm) 27 Thickness (mm) 3 Overall Length (mm) 200
A thin-walled passenger car wheel nut attachment / detachment socket compatible with impact wrenches. A resin cover is attached to prevent damage to the wheel, but it can also be removed. Since the colors are separated according to size, it is easy to identify the size.
For attachment / detachmen... Read More
Case Dimensions (mm) (H x W x D) D 45 x 150 x 130 Square Drive (mm) 12.7(1/2sq) Overall Length (mm) 86 Material Chromium molybdenum steel (CR-MO)
A thin-walled type socket for attaching and detaching passenger car wheel nuts with an O-ring and pin that is compatible with impact wrenches. A resin cover is attached to prevent damage to the wheel, but it can also be removed. Since the colors are separated according to size, it is easy to iden... Read More
It is a dedicated tank for replenishing the fluid by installing it in the tank when changing the brake fluid by yourself. With a stop valve that can adjust the flow rate, it is possible to adjust the amount of replenishment and prevent fluid leakage during removal. It can be firmly fixed with a t... Read More
Nozzle Diameter (Φmm) 17 Clamping Width (mm) 17 (maximum) Size (mm) 115 x 280 (whole), 115 x 175 (tank) Tank Capacity (L) 1
Ideal for car brake lines and flare nuts and bolts.
For tightening and loosening brake pipes
* Do not use for anything other than its intended purpose. * The appearance of the product bag (main body pocket) will be changed, so it will be switched sequentially.
Set Contents (mm)8×10、10×12、11×13、12×14、14×17 Material Chrome vanadium
This tool is used to turn and return the piston of the rear brake caliper that also uses the side brake. The main is used for the rear disc brake. The pattern on each side can correspond to various shapes, which is very convenient. It is possible to easily rotate the piston by fitting the protrus... Read More
Size (mm) 30×30 Square Drive (mm) 9.5(3/8) Mass (g) 90 Material SCM44 (chrome molybdenum)
The inner surface of the cylinder is polished with a whetstone at the tip to remove fine scratches and rust.
For cleaning brake cylinders.
*Please do not use it for anything other than its intended purpose. *Please wear protective equipment such as gloves and goggles when working. *Please do not ... Read More
A lightweight resin oil syringe for brake fluid. It is a product that can be used for both air bleeding and injection.
For bleeding and injecting brake fluid.
* Do not use for anything other than its intended purpose
Hose Length (mm) 180 Capacity (mL) 200 Mass (g) 222 Body Length (mm) 300
It is a thinner type than the conventional product. Since it is treated with black chrome, it is resistant to rust.
For attaching and detaching wheel nuts
* Do not use for any purpose other than its intended purpose. * Some aluminum wheels may not be available. Please check the socket diameter (Φ... Read More
Brake fluid is sucked in using compressed air. Therefore, it is possible to easily bleed brakes and bleed air from hydraulic brake vehicles by yourself. Old oil can be drained or completely replaced with new oil without leaking fluid.
For brake bleeding and air bleeding
* Please do not use it for... Read More
Connection Size (inch) PT1/4 Tank Capacity (L) 1.8 Hose Outer Diameter (Φmm) 8 Dimensions (Width W x Height H) (mm) 260×250 Hose Inner Diameter (Φmm) 4 Hose Length (m) 1 Suitable Air Pressure (MPa) 0.5~1.2 Included Accessories Air coupler
Thin-walled design that can be used with aluminum wheels with narrow nut holes. The total length is 110mm, which can be used for wheels with deep rims. Color coding of the intermediate axis and white character printing that allows you to check the size at a glance. With stopper to prevent scratch... Read More
Since the material is chrome molybdenum steel (black oxide treatment), it has a hardness (HRC) of 40 or more, and is stronger and lasts longer than carbon steel. Since the plate moves in parallel due to the presence of the guide, there is no lateral shake and the work can be done easily by rotati... Read More
Spreading Stroke 10~85mm Mass (g) 810 Plate Dimensions (mm) About 50 × 60 Hardness HRC40
Used to remove stud bolts. It is a set of 4 sizes of stud bolt remover with 1/2 inch (12.7 mm) square. Convenient for storage with a hard case. Since the socket insertion side has a hexagonal part on which a 21 mm wrench can be hung, it can also be used with a spanner. It is very convenient becau... Read More
Square Drive (mm) 12.7(1/2) Width Across Flats (mm) 21 Set Contents M6・M8・M10・M12
It is a large waste liquid tank. A must-have item for brake air bleeding work.
Capacity (L) 1 Dimension D (mm) 100 Mass (g) 170 Dimension l (mm) 182 Dimension L (mm) 282 Trusco Part No. 823-0792 Specification Hose: Soft Enbi Φ5 × Φ8 × 1.1mm Material PE
With a memory to see the remaining amount of oil !! For extracting and injecting gear oil, engine oil, LLC, etc.
* Brake oil, gasoline, etc. cannot be used.
Scale 0.1L increment Mass (kg) 0.9 Capacity (L) 1.5 RoHS directive (corresponding to 10 substances) Correspondence
Ideal for vehicles that cannot be used by ordinary breeders. In a place where a reserve tank such as a minivan or one box is deep!
For changing brake fluid in automobiles.
* Do not use for any purpose other than its intended purpose.
Tank Capacity (L) 1 Material PE (tank), brass (adapter) Included Accessories Nozzle, stopper Hose Length (mm) 210 Dimensions (Width W x Height H) (mm) 105 x 560 (main unit), 105 x 180 (tank)
An impact socket that prevents excessive tightening. The clutch function inside the socket prevents excessive tightening when it reaches 100 Nm, so it is possible to temporarily tighten the wheel nut to 100 Nm with an impact wrench. It is a thin type and can be conveniently used for aluminum whee... Read More
The wrench shape that firmly holds the corners of the nut allows the nut to be tightened and loosened without slipping. Wide grip that does not hurt your hands even if you apply force. The total length is the optimum length that does not interfere with the surroundings when the steering wheel is ... Read More
Dimension T2 (mm) 10 Dimension T1 (mm) 15 Dimension T3 (mm) 17 Dimension L (mm) 220 Trusco Part No. 373-0514 Mass (g) 500 Dimension D (mm) 66 Dimension l (mm) 95
A special tool for adjusting the clearance of the brake shoes of drum brakes. Since both ends have two types of shapes with different angles, it can be used according to the vehicle type and situation.
For adjusting the clearance of the brake shoes of drum brakes
* Do not use for anything other t... Read More
The ABX-33 has a grip that is easy to grip, and can be pressed and pin-turned. The ABX-34 can hold the cup with a tapered cup holder for speedy work.
Remove and install the shoe hold spring of the drum brake of a passenger car.
A convenient tool set for calipers that also serve as side brakes and European cars that are difficult to return with ordinary tools. If you use various attachments, it can be used with a normal one-sided push type piston caliper. By attaching a magnet to the tip, it is difficult to remove the ad... Read More
Ideal for preventing excessive tightening. The clutch function inside the socket prevents excessive tightening when it reaches 100 Nm, so it is possible to temporarily tighten the wheel nut to 100 Nm with an impact wrench. It is a thin type and can be conveniently used for aluminum wheels with na... Read More
The shape makes it easy to apply force, making it ideal for loosening bolts and nuts that are tightly tightened. Since one socket comes with two sockets that support two types of bolts and nuts, it can be used in a wide range of vehicle models. The telescopic handle allows you to work in a comfor... Read More
Square Drive (mm) 12.7 Socket Size (mm) 17×19、21×23 Dimensions (H x W x D) (mm) 350 x 100 x 25 (when stored) Overall Length (mm) 350~500 Set Contents Handle, socket 17 × 19mm, 21 × 23mm
A dedicated tool set that can be used to attach and detach wheel bearing lock nuts (housing nuts) for 2t to medium and large vehicles. Normally, you had to prepare a socket wrench suitable for each nut size and shape, but by using this product you can use it for various sizes and shapes (hexagon,... Read More
Please use it exclusively for tightening and loosening wheel nuts for automobiles. A thin shape suitable for attaching and detaching wheel nuts. With a rubber cushion, it prevents damage to fragile decorative nuts (aluminum wheels, etc.). Hexagonal strong drive
* Since it is a thin type, it may c... Read More
Since the box part is deep, you can work without the bolts getting in the way.
As ONE Part Number 1-7462-01 Trusco Part No. 288-2906 Cutting Edge Magnet None Shaft Penetration None Material (Grip) Resin Type Set product Tip Shape Socket (box)