A special tool that is convenient when removing the clips that hold the interior of a car. Since it has a V shape, it can also be used for studs.
For removing lining console panels and lining clips of automobiles.
* Please refrain from using it for any other purpose.
Shank Diameter (Φmm) 9.5 Mass (g) 158 Material (Shaft) Carbon steel Material (Grip) PP
Useful for removing automobile interiors and resin clips used in interiors. You can work efficiently with 11 types of special shapes and sizes. Uses strong and hard reinforced resin. Comes in a cloth bag that is convenient to carry.
A special tool that is convenient when removing the clips that hold the interior of a car.
For removing lining console panels and lining clips of automobiles.
* Do not use for anything other than its intended purpose.
Material Shaft: Carbon steel, Handle: Plastic Shank Diameter (Φmm) About 6
It can be used not only for exterior clips such as tire houses, but also for interior trim clips.
Used for exterior clips and interior trim clips
* Please do not use it for any purpose other than its intended purpose. * Since it is for clips, it is not recommended for removing the board.
Easily adheres to gentle curved surfaces.
* If you use it on a painted surface, the paint film may be peeled off and it may come off, so please do not use it on a bad painted surface. * Since the suction lifter is for short-term use, if it is used for a long time in the same place or lifted witho... Read More
When replacing or repairing a car door, pinch the mat to prevent accidents caused by the window falling. Create a gap for inserting the release tool without damaging the door or window.
When creating a gap for inserting a release tool when replacing or repairing a car door
* Do not use for anythi... Read More
A tool used to separate the sealing material used for the front and rear glass of automobiles. Simply insert the tip into the gap between the car body and the glass and pull the auxiliary handle lever toward you. It is possible to safely separate the sealant without damaging it. It is more conven... Read More
Easy work by attaching it to the base of the wiper arm and turning it.
For removing the hardened wiper arm.
* Depending on the model, it may not be possible to use it. * Insufficient grease on the threads may cause damage or damage, so apply grease to the threads. * Do not use with excessive force.
Convenient for moving and transporting shelves and objects without handles. Also for repairing dents in cars. Adsorb to the top or side of the product you want to lift.
Material (Main Unit) ABS resin Mass (g) Approximately 60 (per pc) Diameter of Suction Surface (Φmm) About 52 Material (Suction Cup) Natural rubber
It is a special tool for removing the interior of automobiles and resin clips used for interiors.
* The plastic handle is not for insulation. Do not use it for things with electricity. Do not use the tool for any purpose other than its intended purpose.
The cutting edge is a type that can be used for both large and small types. It is compatible with many clips used in automobiles. It is also possible to turn the grip and pry it. It is a chrome-plated finish with good sliding so as not to damage the sheet metal painted part. It is the optimum ang... Read More
Specification Whole body quenching Bit Size 12mm、7mm
Using resin containing fiber, the remover adopts a new shape, the clip in the recessed part can be removed, and the spatula type corresponds to the removal of the audio panel and the cap of the service hole.
For removing the interior of a car.
Applicable to 3 size clips, large, medium and small, and long straight and various items. The large size clip clamp tool has a tip mortar shape that matches the shape of the clip.
Removing car linings and clips. Ideal for lining domestic car doors, back doors, quarter panels, floors, etc.
It can be fixed by simply grasping the handle so that it is pressed against the object. Even when removing it, it is always easy to work with one hand just by releasing the button on the handle.
For attaching and detaching tail lamps, etc.
* It will be difficult to stick to curved surfaces and pl... Read More
A special tool for removing clips from the interior and exterior of automobiles. Ideal for removing clips that are out of reach or reach.
For removing clips on the interior and exterior
For studs and nail pullers. It can also be used to remove the interior stopper clip of a car. With a washer that can be used by hitting with a hammer. Uses high-grade plastic and acetate resin with excellent oil resistance, chemical resistance, impact resistance, and insulation.
With washer that ... Read More
By sandwiching the shaft of the clip and removing it, the clip is less likely to be damaged. The shaft of the clip can be held by the mating hole with a radius of 3.5 mm provided at the tip.
A special tool for removing pins in the regulator handle of car doors.
* The plastic handle is not for insulation. Do not use it for things with electricity. Do not use the tool for any purpose other than its intended purpose.
A convenient tool that can be used easily. Convenient for removing small nails and push pins.
For repair and maintenance work, etc.
* Please do not modify it unnecessarily. Please do not use it for any purpose other than its intended purpose.
Mass (g) 34 Type Unpinned RoHS directive (corresponding to 10 substances) Correspondence
You can easily pull out (unlock) the lock pin of the clip. After pulling out the lock pin, the clip body can also be pulled out. After attaching the clip to the body, the clip shaft can be easily contracted and inserted. Tip shape that does not easily scratch the clip. With a tip angle, it is har... Read More
This one for removing the door belt molding (draining molding)! Uses a tip claw shape that makes it easy to insert into small gaps and slide easily. The handle has a rising angle that makes it difficult to bend and makes it easy to pull up the door belt molding (draining molding). Uses a resin gr... Read More
A special tool for removing clips from the interior and exterior of automobiles. Comes with a tube that does not damage the surroundings. A starby type that is convenient for narrow spaces.
For removing clips on the interior and exterior
You can easily pull out (unlock) the lock pin of the clip. After pulling out the lock pin, the clip body can also be pulled out. After attaching the clip to the body, the clip shaft can be easily contracted and inserted. Tip shape that does not easily scratch the clip. With a tip angle, it is har... Read More
Set Contents Clip clamp pliers (AP202A, AP202B) Mass (g) Clip clamp pliers: 145 each (total 290) Type 35°・ 80°
This product is a set of tools that are convenient for replacing the windshield.
When replacing the windshield
* Please do not use it for any purpose other than its intended purpose.
It can be fixed so that the glass does not fall when the door glass is attached / detached / adjusted.
* Do not use for anything other than its intended purpose. * Do not use for fixing the same place for a long time.
Material (Wire) Steel, (Pad) Rubber Mass (g) 60 / piece
It pulls up the dents on the car body with an excellent adsorption effect. Ideal for repairing large dents. The maximum suction force is 45 kg. * Please note that there are some sizes, locations, and conditions of dents that cannot be pulled out.
A special tool for removing clips from the interior and exterior of automobiles. It corresponds to the clip removal in the deep part at the bending angle of 90 °. Comes with a tube that does not damage the surroundings.
For removing clips and grommets of wire harnesses, for removing clips such as... Read More
A convenient tool that can be used easily. Convenient for opening nail pulling cans!
For repair and maintenance work, etc.
* Please do not modify it unnecessarily. Please do not use it for any purpose other than its intended purpose.
Mass (g) 78 Type Minibar RoHS directive (corresponding to 10 substances) Correspondence
A special tool for removing clips from the interior and exterior of automobiles. It corresponds to the clip removal in the deep part at the bending angle of 90 °. Starby type that is convenient for narrow spaces. Comes with a tube that does not damage the surroundings.
For removing clips and grom... Read More
MonotaRO V-shaped interior clip peelingA special tool that is convenient when removing the clips that hold the interior of a car. Since it has a V shape, it can also be used for studs. For removing lining console panels and lining clips of automobiles. * Please refrain from using it for any other purpose.Shank Diameter (Φmm) 9.5 Mass (g) 158 Material (Shaft) Carbon steel Material (Grip) PP
