Automotive Electrical Tools

Gun grip type plug wrench Equipped with various easy-to-use plug wrench functions that are easy to fit in your hand with an unprecedented shape! FEATURE 1 A gun grip-shaped handle that fits easily in the hand and is easy to apply appropriate torque. With ordinary handle tools, overtorque is likel... Read More

A multifunctional tool that can crimp terminals, crimp, strip coats, cut screws, and cut wires with a single tool. It is also possible to crimp large terminals. Caulking terminals, cutting cords, cutting bolts, stripping cords * Never use it in a place where current is flowing as it is very dange... Read More

Since it is a flexible type plug wrench, it can be used very conveniently for removing the plug in a narrow space. You can rest assured that the plug will not fall off easily. Since it is a T-shaped handle, rotation is smooth. * Do not use for anything other than its intended purpose. * Do not us... Read More

A short type (Starby type) that is easy to work in even in narrow spaces. The rounded tip makes it easy to use. Tightening and loosening the battery fluid replenishment cap and the oil filler cap for some motorcycles * Be careful not to get an electric shock because it is a non-insulated tool. * ... Read More

A socket for the O2 sensor. Since it has a slit, the wiring can be escaped, so the O2 sensor can be attached and detached with the wiring connector attached. The large slit width of 10 mm makes it difficult to damage the wiring, and the total length is 50 mm, making it suitable for work in narrow... Read More

With this tool, it is possible to pull out the terminals inside the coupler without damaging them. It can be used for various terminal shapes with 6 types of tips. * Do not use for anything other than its intended purpose.

Comes with a magnet that allows you to work even in deep places. Thin wall type * Do not hang a wrench on the outer circumference and turn it. (B3A-14SP)

Comes with a special case that is convenient to carry and store. Since the grip is knurled, it is not slippery and is suitable for detailed work. For removing terminals from plugs, connectors, and couplers. * Do not use for anything other than its intended purpose.

Extra-fine test lead pin ... Converts 2mm test pin to 0.7mm. For contact with minute electronic components. Terminals and mounting board parts in the housing.

Uses a lamp that irradiates high-intensity light. You can check the timing mark even in bright places such as in the sunlight. Since it is battery-powered, it boasts good workability even in a small engine room without a power cable. It can be used not only as a timing light but also as a flashli... Read More

The tip is thin and vertical so as not to interfere in the relay box. For removing automobile relays. * It may not be possible to use it depending on the relay shape and mounting condition. Do not apply excessive force as the relay and tool body may be damaged. Be careful not to get an electric s... Read More

Essentials for thin wire work! Can remove coating, crimp terminals, and cut cords. For thin lines (0.3sq or less) only

Adopted a new shape that is easy to distinguish from deep sockets. Comes with a magnet that prevents the spark plug from falling.

For contact with minute electronic components. Terminals and mounting board parts in the housing.

Extra-fine test lead pin: Converts a 2mm test pin to a 0.4mm diameter pin. Terminals and mounting board parts in the housing. Check the voltage from the terminal coupler connected to the PC. For checking the terminals of the waterproof terminal inside the hood.

Thin wall type. For spark plugs only. Automobile tools * It is thin for spark plugs only. Do not use it as an ordinary socket.

Flexible and easy to use in narrow spaces !! In addition, the wrench has a drive angle of 9.5sq, so other tools (ratchets) can be used. Since the head is hexagonal, you can also use glasses.

The driver system drive can be caught on the side instead of the corner, and stronger torque can be applied. The material is finished with chrome vanadium steel, and the hexagonal surface is guaranteed to be deep and uniform through forging. 2-year warranty for peace of mind! All items are marked... Read More

Compatible with various plug / connector shapes. A tool that pulls out plugs and connectors from the housing without damaging them. Convenient for correcting the placement position of electronic components such as lead wires, ICs, and capacitors.

Since there are slits (cutting grooves) on the side, you can work without the protrusions getting in the way.

Compatible with single type and double type couplers! For removing the coupler! It is especially convenient for attaching and detaching the wiring coupler on the back of the speedometer.

A battery-only screwdriver with a coin-type screwdriver and a 10mm spanner. It is used to tighten and loosen the liquid spout when checking the battery fluid and refilling it. You can also remove the battery terminal with a 10mm wrench. For tightening and loosening the liquid spout when checking ... Read More

A special tool used to remove the spark plug cap. It is a very convenient tool if you need to apply force when the plug cap is stuck and cannot be removed. Since the tip is dipping processed, the plug is not easily damaged and can be firmly pinched and removed. For removing the plug cap of the sp... Read More

Protects automobile electronic circuits. 12V / 24 combined battery protector.

It is an ultra-fine tip shape that pushes down the wing in the narrow gap between the coupler wall and the plug.

Thin! Long! Driver Thinner than usual Shaft diameter 5mm !! Ideal for cars with narrow optical axis adjustment holes for headlights! With grip and tip magnet that can be hooked

A dropper for draining brake fluid and battery fluid.

Crimping range: Round terminal 8-38sq

With inch / millimeter scale, for spark plugs

Mini size smaller than the palm of your hand, backflow prevention function, and LED voltmeter. Not only the surge absorption that occurs when the engine starter is attached or detached, but also the LED voltage digital display and the newly installed paradox prevention function. Achieves work saf... Read More

It is a compact (thin wall) design that enables access to narrow spaces. Excellent usability is achieved by pursuing the accuracy of each part. A clip (leaf spring) method is used to hold the spark plug. By adopting a new shape ball dimple, we have realized a joint without rattling.

One can be applied to two types of spark plugs.

It is a sensor socket set that matches various sensors such as O2 sensor. Since it is slit and cut out, it is compatible with sensors that match various shapes. For attaching / detaching the sensor socket * Do not use for any purpose other than its intended purpose. * Not compatible with impact w... Read More

This is convenient when removing the relay inside the fuse box. * Please do not use for any purpose other than the original purpose or beyond the ability. * Do not use on objects with electricity as there is a risk of electric shock. * When working, check the safety around you and wear protective... Read More

A set of O2 sensor socket and O2 sensor socket attachment. You can avoid obstacles by using attachments.

Crimping range: Round terminal 0.3-2.0sq

A special tool for unlocking and pulling out the connector housing used in automobiles. You can smoothly release small locks, thin locks, and dented locks that are difficult to work with. Compatible with various connector housings by exchanging 3 types of claws with different bending angles and t... Read More

A spark test can be performed at the end of the plug wire. Check the ignition spark without unplugging the spark plug.