All Category

Cutting Tools / Abrasives

View : Grid List
Filter

Items 1 - 40 of 129

Set Ascending Direction
  1. New Omura Whetstone
    NANIWA (Naniwa Abrasive Mfg) New Omura Whetstone
    A natural-style rough whetstone that achieves the sharpening taste of a natural whetstone.
    Abrasive Grain Size  #150  Abrasive  Silicon carbide 
    Rating:
    80%
    from S$4.89
    Min. 2 days
  2. Double-headed grinder wheel (GC)
    NANIWA (Naniwa Abrasive Mfg) Double-headed grinder wheel (GC)
    Grinding and polishing of stone, aluminum, ceramics, cemented carbide, non-metals, etc.
    Abrasive Grain Size  #120  Hole Diameter (Φmm)  12.7  Specification  For masonry  Abrasive  GC  Abrasive Grain  GC  Suitable Material  Mason 
    Rating:
    80%
    from S$29.99
    Min. 2 days
  3. Shrimp Mark Micron Deluxe Large M-32
    NANIWA (Naniwa Abrasive Mfg) Shrimp Mark Micron Deluxe Large M-32
    For sharpening blades for professionals.
    Dimension (mm)  210×65×32 
    from S$36.99
    Min. 6 days
  4. Dirt / rust cancel rubber SAKU
    NANIWA (Naniwa Abrasive Mfg) Dirt / rust cancel rubber SAKU
    Eraser type for removing dirt and rust. Rust remover * It may be deformed if used near high temperature.
    Dimension (mm)  50×40×20  Mass (g)  84  Material  Alumina abrasive / polyvinyl chloride 
    from S$10.99
    Min. 5 days
  5. Flattening Stone
    NANIWA (Naniwa Abrasive Mfg) Flattening Stone
    You can quickly correct the dents on the grindstone. It can be corrected more smoothly when used in combination with Kongo sand.
    Abrasive Grain Size  #60  Wheel Size (mm)  170×55×30  Mass (g)  500  Abrasive  Silicon carbide 
    Rating:
    87%
    from S$24.99
    Min. 2 days
  6. Oil whetstone (square whetstone)
    NANIWA (Naniwa Abrasive Mfg) Oil whetstone (square whetstone)
    Used for polishing blades and tools, polishing molds and inner surfaces, etc.
    Suitable Material  Cutting tools and tools  Abrasive  Fused alumina  Specification  Square whetstone 
    Rating:
    70%
    from S$14.99
    Min. 2 days
  7. Diamond Brick
    NANIWA (Naniwa Abrasive Mfg) Diamond Brick
    Grinder grindstone, grindstone, grindstone for repairing concrete surface
    Abrasive Grain Size  #36  Abrasive  Silicon carbide 
    Rating:
    88%
    from S$17.99
    Min. 2 days
  8. GC / DX Mama Whetstone
    NANIWA (Naniwa Abrasive Mfg) GC / DX Mama Whetstone
    A handy type whetstone that can be used on both sides (rough / medium whetstone)
    Abrasive Grain Size  #220/#1000  Wheel Size (mm)  10×30×6  Mass (g)  80  Abrasive  Silicon carbide / Fused alumina 
    from S$16.99
    Min. 2 days
  9. Oil Whetstone Stick
    NANIWA (Naniwa Abrasive Mfg) Oil Whetstone Stick
    Used for polishing blades and tools, polishing molds and inner surfaces, etc.
    Abrasive Grain Size  #320  Sharpening Object  Cutlery / tool, mold and inner surface  Abrasive  Fused alumina 
    Rating:
    93%
    from S$16.99
    Min. 2 days
  10. Square Whetstone Ceramic Home Stone
    NANIWA (Naniwa Abrasive Mfg) Square Whetstone Ceramic Home Stone
    With stand
    Material (Shorter Rule)  ABS resin  Abrasive  Molten alumina 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  11. Shrimp Mark Gouken Whetstone for Curved Blade
    NANIWA (Naniwa Abrasive Mfg) Shrimp Mark Gouken Whetstone for Curved Blade
    It also supports pruning shears and is suitable for sharpening other curved blades. For pruning shears and sharpening curved blades * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Dimension (mm)  133×28×20  Sharpening Object  Pruning shears, curved blade 
    Rating:
    95%
    from S$17.99
    Min. 2 days
  12. Double-headed grinder wheel (WA)
    NANIWA (Naniwa Abrasive Mfg) Double-headed grinder wheel (WA)
    Grinding and polishing of stainless steel, hardened steel, alloy steel, special steel, etc.
    Abrasive Grain Size  #60  Hole Diameter (Φmm)  12.7  Specification  For stainless steel  Suitable Material  Stainless steel  Abrasive Grain  WA  Abrasive  WA 
    Rating:
    100%
    from S$26.99
    Min. 2 days
  13. Shrimp mark Golden sand for straightening grinding wheel C sand 400g in plastic container
    NANIWA (Naniwa Abrasive Mfg) Shrimp mark Golden sand for straightening grinding wheel C sand 400g in plastic container
    For correction. Corrects more quickly when used in combination with a face-up grindstone. For fixing whetstones
    Mass (g)  400  Material  Silicon carbide abrasive 
    Rating:
    80%
    from S$33.99
    Min. 2 days
  14. Nagura Whetstone "Aya"
    NANIWA (Naniwa Abrasive Mfg) Nagura Whetstone "Aya"
    Can also be used for grinding work such as various cutting tools. The effect varies greatly depending on the combination of grindstones used, and it can be used for various purposes. For grinding of grindstones that are hard and difficult to produce.
    Dimension (mm)  About 60 × 30 × 20 
    Rating:
    87%
    from S$18.99
    Min. 2 days
  15. Whetstone Holder with Adjuster
    NANIWA (Naniwa Abrasive Mfg) Whetstone Holder with Adjuster
    The length of the grindstone can be adjusted from 135 mm to 220 mm.
    Dimension (mm)  260×80×50  Mass (g)  50  Material  ABS resin 
    Rating:
    20%
    from S$14.99
    Min. 2 days
  16. Grindstone for General Cutlery
    NANIWA (Naniwa Abrasive Mfg) Grindstone for General Cutlery
    For rough sharpening: Used for correcting blade spills and adjusting the blade before medium sharpening.
    Wheel Size (mm)  205×50×25  Abrasive  Silicon carbide 
    Rating:
    100%
    from S$21.99
    Min. 2 days
  17. Welding diamond dry corea 21
    NANIWA (Naniwa Abrasive Mfg) Welding diamond dry corea 21
    Positioning is OK without amazing drilling speed guide Easy to attach to a disc grinder No need for water, no curing, easy to clean up afterwards For drilling holes in general porcelain tiles, hard porcelain tiles, stone tiles, granite, roof tiles, etc. * When using, be sure to attach the safety ... Read More
    Effective Length (mm)  30  Overall Length (mm)  60  Mounting Screw Diameter  M10  Applicable Workpiece Materials  Tiles, granite, tiles, etc. 
    Rating:
    100%
    from S$58.99
    Min. 2 days
  18. Grinding wheel for tabletop grinder (A)
    NANIWA (Naniwa Abrasive Mfg) Grinding wheel for tabletop grinder (A)
    Grinding and polishing of iron, ordinary steel, cast iron, cast steel, etc.
    Abrasive Grain Size  #60  Hole Diameter (Φmm)  12.7  Outer Diameter (Φmm)  150  Mass (g)  210  Thickness (mm)  6.4  Abrasive  Suitable Material  Iron 
    Rating:
    100%
    from S$26.99
    Min. 2 days
  19. Easy Sharpener Jaws
    NANIWA (Naniwa Abrasive Mfg) Easy Sharpener Jaws
    A whetstone with auxiliary metal fittings for learning the sharpening angle. For finish sharpening
    Abrasive Grain Size  #3000  Wheel Size (mm)  185×65×15  Mass (g)  460  Abrasive  Molten alumina 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  20. Whetstone for tabletop grinder (WA)
    NANIWA (Naniwa Abrasive Mfg) Whetstone for tabletop grinder (WA)
    Grinding and polishing of stainless steel, hardened steel, alloy steel, special steel, etc.
    Abrasive Grain Size  #60  Mass (g)  100  Hole Diameter (Φmm)  12.7  Outer Diameter (Φmm)  125  Thickness (mm)  3.2  Suitable Material  Stainless steel  Abrasive  WA 
    Rating:
    75%
    from S$21.99
    Min. 2 days
  21. Red shrimp mark GC corner
    NANIWA (Naniwa Abrasive Mfg) Red shrimp mark GC corner
    For rough sharpening. It is a grindstone with excellent grinding power and is used to correct chipped blades and blades before medium sharpening. For rough sharpening of various blades * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Dimension (mm)  205×50×25  Material  Green silicon carbide abrasive  Sharpening Object  Various knives 
    from S$29.99
    Min. 2 days
  22. Ebi Mark Flattening Stone MIni
    NANIWA (Naniwa Abrasive Mfg) Ebi Mark Flattening Stone MIni
    For correction. The grooved type quickly corrects dents in the grindstone. For correcting dents on the grindstone surface * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Dimension (mm)  170×55×30  Material  Silicon carbide abrasive 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  23. Shrimp mark Straightening whetstone With grooved rubber base
    NANIWA (Naniwa Abrasive Mfg) Shrimp mark Straightening whetstone With grooved rubber base
    For correction. The grooved type quickly corrects dents in the grindstone. For correcting dents on the grindstone surface * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Abrasive Grain Size  #24  Mass (g)  2300  Dimension (mm)  300×150×20  Material  Silicon carbide abrasive 
    Rating:
    80%
    from S$119.90
    Min. 2 days
  24. Sharpening Well Clip
    NANIWA (Naniwa Abrasive Mfg) Sharpening Well Clip
    Angle assist clip for sharpening kitchen knives For sharpening kitchen knives * Scratches may occur depending on the surface-processed kitchen knife or the material of the kitchen knife. If you feel that the pinching strength has weakened during use, stop using it once.
    Mass (g)  20  Dimension (mm)  58×19×16  Material  ABS resin / aluminum ceramic 
    Rating:
    60%
    from S$9.89
    Min. 2 days
  25. Square Whetstone Ceramic Work Stone
    NANIWA (Naniwa Abrasive Mfg) Square Whetstone Ceramic Work Stone
    When sharpening canna, chisel, kitchen knife
    Sharpening Object  Canna, only, kitchen knife  Material (Shorter Rule)  Natural rubber 
    Rating:
    73%
    from S$33.99
    Min. 3 days
  26. Stainless Steel Sharpening Table and Stand Sink Bridge
    NANIWA (Naniwa Abrasive Mfg) Stainless Steel Sharpening Table and Stand Sink Bridge
    Supports sinks with a depth of 400 to 550 mm. It is a convenient item that can also be used as a grindstone stand and a stand. Whetstone stand * Stainless steel itself may become hot if used near high temperatures.
    Mass (g)  1130  TKG Part No. (2017)  6-0324-1901  TKG Part No.  8-0339-0201  Material  Stainless steel  Suitable Size (mm)  W200~250 D50~100 
    from S$139.90
    Min. 2 days
  27. Akamon Mae Deluxe
    NANIWA (Naniwa Abrasive Mfg) Akamon Mae Deluxe
    For medium sharpening when the sharpness of the blade becomes poor.
    Abrasive Grain Size  #1000  Mass (g)  2000  Wheel Size (mm)  210×70×60  Specification  Medium  Abrasive  Molten alumina 
    Rating:
    100%
    from S$64.99
    Min. 2 days
  28. Red shrimp mark
    NANIWA (Naniwa Abrasive Mfg) Red shrimp mark
    For rough sharpening. It is used for blade chipping, major correction, and blade adjustment before medium sharpening. For rough sharpening of various blades * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Dimension (mm)  205×50×25  Material  Silicon carbide abrasive  Sharpening Object  Various knives 
    from S$26.99
    Min. 2 days
  29. Double-headed G whetstone for ironworker A
    NANIWA (Naniwa Abrasive Mfg) Double-headed G whetstone for ironworker A
    Grinding and polishing of iron, ordinary steel, cast iron, cast steel, etc.
    Abrasive Grain Size  #36  Hole Diameter (Φmm)  12.7  Outer Diameter (Φmm)  150  Thickness (mm)  16  Mass (g)  640  Abrasive  Abrasive Grain  Suitable Material  Iron 
    from S$27.99
    Min. 2 days
  30. Shrimp Mark Super Whetstone with Stand S400
    NANIWA (Naniwa Abrasive Mfg) Shrimp Mark Super Whetstone with Stand S400
    For rough sharpening. A whetstone that seeks the sharpening taste of natural whetstones. For sharpening knives * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Material  Alumina abrasive  Sharpening Object  Various knives 
    from S$48.99
    Min. 3 days
  31. Whetstone with stainless steel knife stand
    NANIWA (Naniwa Abrasive Mfg) Whetstone with stainless steel knife stand
    For sharpening knives * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Dimension (mm)  175×55×16  Sharpening Object  Stainless knife 
    Rating:
    100%
    from S$36.99
    Min. 3 days
  32. C square sickle (for blades with steel)
    NANIWA (Naniwa Abrasive Mfg) C square sickle (for blades with steel)
    For rough sharpening. For cleaning sickles, nata, grass scrapers, etc. For sharpening a sickle whetstone * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Abrasive Grain Size  #180  Dimension (mm)  150×38×25  Mass (g)  280  Material  Silicon carbide abrasive 
    from S$13.99
    Min. 4 days
  33. Shrimp Mark Micron Deluxe
    NANIWA (Naniwa Abrasive Mfg) Shrimp Mark Micron Deluxe
    For medium sharpening. For daily maintenance or when the sharpness of the blade becomes poor. For medium sharpening of various blades * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Material  Alumina abrasive  Sharpening Object  Various knives 
    from S$29.99
    Min. 3 days
  34. Shrimp Mark with Super Whetstone Stand S8000
    NANIWA (Naniwa Abrasive Mfg) Shrimp Mark with Super Whetstone Stand S8000
    For super finish sharpening. A whetstone that seeks the sharpening taste of natural whetstones. For sharpening knives * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Material  Alumina abrasive  Sharpening Object  Various knives 
    from S$88.99
    Min. 5 days
  35. Shrimp Mark Fine / DX Papa Whetstone
    NANIWA (Naniwa Abrasive Mfg) Shrimp Mark Fine / DX Papa Whetstone
    Double-sided handy whetstone. Sharpen quickly without getting your hands dirty For sharpening various blades * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Abrasive Grain Size  #3000/#1000  Dimension (mm)  64×28×16  Mass (g)  90  Sharpening Object  Various knives 
    from S$23.99
    Min. 5 days
  36. Shrimp Mark Ultra-ceramic Grinding Wheel with Stand
    NANIWA (Naniwa Abrasive Mfg) Shrimp Mark Ultra-ceramic Grinding Wheel with Stand
    It has an outstanding sharpness that exceeds the limits of artificial whetstones. For sharpening knives * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Dimension (mm)  210×70×25  Material  Alumina abrasive  Sharpening Object  Various knives 
    from S$119.90
    Min. 5 days
  37. Whetstone for general blade
    NANIWA (Naniwa Abrasive Mfg) Whetstone for general blade
    For rough sharpening: Convenient whetstone that can be used on both sides
    Abrasive Grain Size  #120/#220  Wheel Size (mm)  205×50×25  Mass (g)  480  Abrasive  Silicon carbide 
    from S$23.99
    Min. 2 days
  38. Shrimp Mark with Super Whetstone Stand S5000
    NANIWA (Naniwa Abrasive Mfg) Shrimp Mark with Super Whetstone Stand S5000
    For finish sharpening. A whetstone that seeks the sharpening taste of natural whetstones. For sharpening knives * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Material  Alumina abrasive  Sharpening Object  Various knives 
    from S$95.99
    Min. 3 days
  39. S2000 S2000 Super whetstone with stand
    NANIWA (Naniwa Abrasive Mfg) S2000 S2000 Super whetstone with stand
    For medium finish sharpening. A whetstone that seeks the sharpening taste of natural whetstones. For sharpening knives * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Material  Alumina abrasive  Sharpening Object  Various knives 
    from S$69.99
    Min. 5 days
  40. Shrimp Mark Gouken Hayabusa
    NANIWA (Naniwa Abrasive Mfg) Shrimp Mark Gouken Hayabusa
    For finish sharpening. It is the highest quality finish that has evolved further. For sharpening knives * After using the grindstone, wash it with water and dry it in the shade before storing it.
    Abrasive Grain Size  #4000  Dimension (mm)  210×70×20  Mass (g)  620  Material  Alumina abrasive  Sharpening Object  Various knives 
    Rating:
    100%
    from S$58.99
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 129

Set Ascending Direction