Cutting Tools
A cutting tool is a tool used to cut or cut metal into a certain shape. The shape is adjusted by scraping the surface with a tool that is harder than the work piece against or hitting the object. For this reason, cutting tools are required to be made of materials that do not easily wear or chip. It is mainly used by attaching to machine tools, but the shape varies depending on the processing method. There are cutting tools for drilling, threading, turning for rotating the object and cutting, and turning tool for rotating the tool.
Other Related Pages
- MonotaRO Hex Axis Drill & Step Drill Set TiN CoatCross-thinning processing (3 mm or more) on the tip provides excellent bite into materials. Comes with a convenient step bit for drilling curved surfaces such as pipes. *Be sure to wear safety glasses when working as there is a risk of damage. *Do not touch the cutting edge with bare hands. *Be c... Read MoreTip Angle (°) 118 Shank Diameter (mm) 6.35 Material High speed steel (HSS) Helix Angle Standard Surface Treatment TiN coating Drill Thinning Shape X-type thinning (Φ3mm or more)
- Hayasaka Mfg. SKS Hand TapIt is a general tap and is used in all directions. For 3rd grade gaugeMaterial Alloy tool steel (SKS) Type of Thread M Shape M6 and below are protruding centers
- NICOTEC Bimetal Hole SawThe cutting edge of high-grade high-grade (M42) and tough spring steel are welded with an electron beam to achieve high cutting performance that could not be achieved with conventional solid hole saws. By adopting a combination pitch, vibration during drilling is suppressed and highly accurate ma... Read MoreEffective Cutting Capacity (mm) 3.2 Drill Diameter (Φmm) 6 Suitable Tool Electric drill, drilling machine Number of Tips Unequal (4/6)
- MonotaRO TiN Coated Straight Drills SetBy applying X-shaped thinning processing (3 mm or more) to the cutting edge, outstanding bite and sharpness are achieved. Center runout range 0.3 mm. Achieves improved processing speed by adopting titanium coating. * Please use protective goggles when working as there is a risk of damage. * Do no... Read MoreTip Angle (°) 118 Material High speed steel (HSS) Helix Angle Standard Surface Treatment TiN coating Drill Thinning Shape X-type thinning (Φ3mm or more)
- MonotaRO High-speed Steel Square End Mill Short 4-BLade Center CutA high-speed end mill suitable for side machining and finishing. Carbon steel, alloy steel, cast iron, aluminum alloy * Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0~+0.03 Number of Tips 4 Material Cobalt high speed steel Shank Diameter Tolerance (mm) h6
- MonotaRO Saver saw bladePipes can also be cut For metal * Do not use for anything other than its intended purpose.Blade Thickness (mm) 0.9
- NICOTEC Impact Hole SawHole sawing can be performed with an impact driver. It can also be used with a cordless drill driver with general drill chuck specifications or an electric drill. A low power consumption, low torque type hole saw. Achieves powerful machining with a tough hexagonal shaft and a tough and unrivaled ... Read MoreSuitable Thickness of Workpiece (mm) 1.6 Effective Length (mm) 12.5 Hex Shank across Flats 6.35 Teeth Spacing 8 Shape of Shank Hex axis Shank Hex axis 6.35mm
- MonotaRO Spiral Tap Hex ShankIt can be attached to an electric drill with a forward / reverse switching function, and screw holes can be easily machined. The spiral shape allows chips to be discharged upward, making it suitable for blind hole drilling. For threading blind holes. * Do not use for any purpose other than its in... Read MoreHex Width Across (mm) 6.35 Type of Thread M
- MonotaRO Drills Set for Stainless SteelUses cobalt high-speed steel, making it ideal for processing stainless steel. By applying X-shaped thinning processing (3 mm or more) to the cutting edge, outstanding bite and sharpness are achieved. Center runout range 0.3 mm. * Please use protective goggles when working as there is a risk of da... Read MoreDrill Thinning Shape X type thinning Material Cobalt high-speed steel (HSS Co) Tip Angle (°) 135 Helix Angle Strong twist
- MonotaRO Short Drill Bit with Threaded Tip for WoodworkingIdeal for drilling holes in boards and boards, the tip of the drill is a tip screw type, so smooth drilling is possible without pressing. General wood * Do not use for anything other than its intended purpose.Shank Diameter (Φmm) 6.35 Material S45C Tip Shape Tip thread type
- MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2.5D GashTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read MoreBlade Diameter Tolerance (mm) 0~-0.03 Number of Tips 2 Maximum Drilling Capacity 2.5D Helix Angle (°) 30 Material Cemented carbide Type Cutting edge gash pad Cutting Edge Shape Cutting edge gash pad
- MIYANAGA Carbide Hole Saw 278Sharpness for cutting from steel plate, stainless steel plate to synthetic resin plate. Compared to the high-speed blade, a high-speed electric motor can be used, enabling speedy drilling. For drilling holes in steel plates, stainless steel plates, copper plates, aluminum plates, etc. up to a pla... Read MoreEffective Length (mm) 4 RoHS directive (corresponding to 10 substances) Correspondence Compatible Motor Electric drill (use only for rotation)
- MonotaRO Magnetic Drilling Machine CutterYou can work efficiently by improving the drilling speed without the need for pilot holes. Drilling up to 35mm thick is possible. For drilling holes in steel plates, shaped steel, stainless steel, cast iron, etc. * Do not use for purposes other than the original purpose. *Be sure to wear safety g... Read MoreEffective Length (mm) 35 Overall Length (mm) 74 Applicable Workpiece Materials Mild steel, stainless steel Shank size (mm) Φ19.05×L23
- TRUSCO Nice Men G (Chamfering Cutter)Longer life due to titanium coating. Beautiful surface finish without chattering. Smooth surface finish with a single blade.Chamfer Angle 90° Blade Shape Others Material SKH-51 (High Speed)
- MonotaRO Square High-Speed Steel End Mill, Short, 2-FluteSuitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0~-0.03 Number of Tips 2 Helix Angle (°) 30 Shank Diameter Tolerance (mm) h6
- BOSCH SDS Plus Bit S4L[SDS Plus Bit S4L] Greatly improved efficiency in drilling concrete! ● Strength is increased with a new shape tip! Reinforcing bar performance and deck plate performance have been improved. ● Drilling speed increased by about 25%! (Compared to our conventional products) ● Lifespan is increased by... Read More
- MonotaRO Carbide Square End Mill TiAlN Coated 4-flute 2.5D GashTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read MoreBlade Diameter Tolerance (mm) 0~-0.03 Maximum Drilling Capacity 2.5D Helix Angle (°) 30 Number of Tips 4 Material Cemented carbide Type Cutting edge gash pad Surface Treatment TiAIN
- MonotaRO Carbide square end mill, TiAlN coated, 2-flute 2.5D pin cadTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read MoreBlade Diameter Tolerance (mm) 0~-0.03 Number of Tips 2 Maximum Drilling Capacity 2.5D Helix Angle (°) 30 Material Cemented carbide Surface Treatment TiAlN Cutting Edge Shape Tip pin type Type Tip pin type
- MonotaRO Demolition bladeThe blade thickness is 1.3 mm, so it is hard to break and is suitable for dismantling work. Since it uses cobalt high-speed bimetal, it is also suitable for cutting stainless steel and has a long life. For cutting and dismantling wood, metal and PVC pipes. * Be sure to wear protective equipment w... Read MoreBlade Thickness (mm) 1.3 Thread Per Inch 10/14 Width (mm) 19
- TRUSCO Counter SinkCobalt high-speed steel is used as the base material, and it has excellent wear resistance and heat resistance. By adopting a 3-flute shape for the cutting edge, chips can be discharged well and a beautiful finish can be obtained. Work material: Iron, casting, stainless steel. chamfer. Deburring.... Read MoreNumber of Tips 3 Blade Shape 3 blades Tip Angle (°) 90 Chamfer Angle 90° Material Cobalt high speed steel (HSS-Co) Surface Treatment Non-coated
- TRUSCO Extractor (Spiral Type)Bolts that are broken in the screw holes can also be removed without damaging the screw holes. For pulling out broken bolts and pipes. * Cannot be used for hardened bolts and stainless steel bolts.Material S45C
- MonotaRO Extractor + spiral typeIt is possible to remove broken bolts without damaging the screw holes. For removing broken bolts * If excessive force is applied, it may break. * Cannot be used for heat-treated bolts. * Handle is not included.Material Chromium molybdenum (heat treated) Hardness HRC43~47
- MonotaRO High-speed square end mill, long, 4-flute, center cutSuitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0~+0.03 Helix Angle (°) 30 Number of Tips 4
- LIGHT SEIKI Round Die Metric Thread (M) Outside Diameter 38Outer Diameter (Φmm) 38 Thickness (mm) About 13 Type of Thread M Material SKS2
- BOSCH Jigsaw Blade for WoodworkingBosch jigsaw blades are processed at the Bosch Swiss factory using traditional quenching technology and advanced polishing technology, and are highly evaluated by users as high-quality blades that demonstrate outstanding sharpness. With a rich lineup for woodworking, you can select the best blade... Read MoreCutting Capacity, Mild Steel Sheet (mm) -
- MonotaRO Spiral Tap Steam TreatingIdeal for female thread machining of blind holes. Since it is homotreated, it is difficult to weld and achieves a long life. For general mild steel * Be sure to wear protective equipment when using as there is a risk of injury. * Do not use for any purpose other than its intended purpose.Chamfer 2.0~3.0P Number of Flutes 3 Spiral groove angle (°) 40 Shape Below M6 is the protrusion center. Finish Processing For blind holes Material High speed tool steel (HSS-E) Surface Treatment Homo processing Accuracy Grade JIS Class 2 equivalent Type of Female Thread Metric screw
- F.P.TOOLS Adjustable ReamerThe blade diameter is adjustable.Number of Tips 6 Material SKS
- MonotaRO High-speed ball end mill, 2-flute* Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0~-0.030 Number of Tips 2 Helix Angle (°) 30
- MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2D GashTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read MoreBlade Diameter Tolerance (mm) 0~-0.03 Number of Tips 2 Maximum Drilling Capacity 2D Helix Angle (°) 30 Material Cemented carbide Type Cutting edge gash pad Surface Treatment TiAlN
- TRUSCO Extractor Combination (Square Type)Bolts that are broken in the screw holes can also be removed without damaging the screw holes. * Cannot be used for hardened bolts and stainless steel bolts.Material S45C
- ALPEN Concrete drill long life (straight shank)The carbide tip at the tip contributes to high bite resistance and durability. Especially when drilling holes in concrete, it has a long life. Work Material: Concrete, Brick, Mixture, Natural Stone, etc.Material Blade: Carbide tip Suitable Model Electric drill and vibration drill Shank Straight
- TAKURA KOGU SEISAKUSYO Chuck ArborUsed when using a drill chuck, etc. on a drilling machine or lathe.Specification Hardened abrasive
- SSPOWER Aluminum ViseFirmly fixes the processed material when processing wood, iron, etc.Material Made of aluminium Specification With quick lever
- TRUSCO Extractor (Square Type)A type that can be used for both left and right bolts and screws. For pulling out broken bolts and pipes. * Cannot be used for hardened bolts and stainless steel bolts.Material S45C
- SANKO MFG 4 Blade Long Blade End Mill* For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.Dimension Tolerance (mm) +0.03~0 Helix Angle (°) 30 Number of Tips 4
- TRUSCO Folding tap removal tool (for three grooves)A tool that allows you to easily remove the folded tap without damaging the thread when the tap is broken in the middle. Since the claw uses a special hard wire, it has high torsional strength and is hard to break, so even a strongly bitten fold-in tap can be easily removed. Even if your nails ar... Read MoreMaterial S45C Type of Thread PT
- SUN UP Drilling Machine ViseConvenient when working on drilling machines, milling machines, and lathes.Material Cast iron
- Okazaki Seiko Metal SawGrooving of cast iron and steel Precision cutting of general metalsHole Diameter d (Φmm) 25.4 Outer Diameter D (Φmm) 75 Material MCO (cobalt High Speed Steel)
- KAKUDAI MFG Flexible joint hoseYou can easily connect and disconnect the joints one by one and freely adjust the disconnection length.Material POM
- MonotaRO Cross viceA vise that can be crossed back and forth and left and right. Tightening and fixing the work. * Do not use for any other purpose.Material FC250