All Category

End Mills

An end mill is a cutting tool used to smoothly cut the surface of parts such as metal and plastic. There are many types of end mills, and they are classified into many types according to the number of cutting edges and the cutting length. Although there are differences depending on the cutting method, a two-blade end mill is used for general cutting operations. A multi-blade end mill is suitable for cutting narrow parts such as side cuts. The appropriate blade length will vary depending on the depth of cut. Use caution when using a blade length that is too long, as vibration will occur and it will not be cut well.
View : Grid List
Filter

Items 1 - 40 of 4442

Set Ascending Direction
  1. High-speed Steel Square End Mill Short 4-BLade Center Cut
    MonotaRO High-speed Steel Square End Mill Short 4-BLade Center Cut
    A high-speed end mill suitable for side machining and finishing. Carbon steel, alloy steel, cast iron, aluminum alloy * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~+0.03  Number of Tips  Material  Cobalt high speed steel  Shank Diameter Tolerance (mm)  h6 
    Rating:
    90%
    from S$11.99
    Min. 2 days
  2. Carbide Square End Mill TiAlN Coated 2-Flute 2.5D Gash
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2.5D Gash
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Maximum Drilling Capacity  2.5D  Helix Angle (°)  30  Material  Cemented carbide  Type  Cutting edge gash pad  Cutting Edge Shape  Cutting edge gash pad 
    Rating:
    92%
    from S$11.99
    Min. 2 days
  3. Square High-Speed Steel End Mill, Short, 2-Flute
    MonotaRO Square High-Speed Steel End Mill, Short, 2-Flute
    Suitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Shank Diameter Tolerance (mm)  h6 
    Rating:
    92%
    from S$12.99
    Min. 2 days
  4. Carbide Square End Mill TiAlN Coated 4-flute 2.5D Gash
    MonotaRO Carbide Square End Mill TiAlN Coated 4-flute 2.5D Gash
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Maximum Drilling Capacity  2.5D  Helix Angle (°)  30  Number of Tips  Material  Cemented carbide  Type  Cutting edge gash pad  Surface Treatment  TiAIN 
    Rating:
    89%
    from S$16.99
    Min. 2 days
  5. Carbide square end mill, TiAlN coated, 2-flute 2.5D pin cad
    MonotaRO Carbide square end mill, TiAlN coated, 2-flute 2.5D pin cad
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Maximum Drilling Capacity  2.5D  Helix Angle (°)  30  Material  Cemented carbide  Surface Treatment  TiAlN  Cutting Edge Shape  Tip pin type  Type  Tip pin type 
    Rating:
    86%
    from S$9.79
    Min. 2 days
  6. High-speed square end mill, long, 4-flute, center cut
    MonotaRO High-speed square end mill, long, 4-flute, center cut
    Suitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~+0.03  Helix Angle (°)  30  Number of Tips 
    Rating:
    99%
    from S$16.99
    Min. 2 days
  7. High-speed ball end mill, 2-flute
    MonotaRO High-speed ball end mill, 2-flute
    * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.030  Number of Tips  Helix Angle (°)  30 
    Rating:
    88%
    from S$17.99
    Min. 2 days
  8. Carbide Square End Mill TiAlN Coated 2-Flute 2D Gash
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2D Gash
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Maximum Drilling Capacity  2D  Helix Angle (°)  30  Material  Cemented carbide  Type  Cutting edge gash pad  Surface Treatment  TiAlN 
    Rating:
    83%
    from S$9.19
    Min. 2 days
  9. 4 Blade Long Blade End Mill
    SANKO MFG 4 Blade Long Blade End Mill
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Dimension Tolerance (mm)  +0.03~0  Helix Angle (°)  30  Number of Tips 
    Rating:
    93%
    from S$33.99
    Min. 2 days
  10. SG-FAX Roughing end mill Fine pitch short
    NACHI (NACHI-FUJIKOSHI) SG-FAX Roughing end mill Fine pitch short
    SG coating is applied to powdered highs to enable high-efficiency machining like carbide. Lifespan is more than 3 times that of conventional products. Supports from mold steel to difficult-to-cut materials. Carbon steel, alloy steel, pre-hardened steel, die steel, heat resistant alloy, cast iron,... Read More
    Surface Treatment  SG (TiCN) coating  Helix Angle  Standard  Tolerance (μm)  ±100 
    from S$99.90
    Min. 4 days
  11. 4-flute regular blade end mill
    SANKO MFG 4-flute regular blade end mill
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Number of Tips 
    from S$29.99
    Min. 4 days
  12. 2-Flute Ball End Mill Regular Blade
    SANKO MFG 2-Flute Ball End Mill Regular Blade
    Number of Tips  Material  High cobalt high speed (SKH57) 
    from S$56.99
    Min. 109 days
  13. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Shank Diameter (Φmm)  Material  Cobalt high speed HS-Co 
    from S$49.99
    Min. 4 days
  14. Carbide Square End Mill, 2-Flute For Aluminum Processing
    Zhuzhou Tools Carbide Square End Mill, 2-Flute For Aluminum Processing
    Side processing, shoulder cutting, grooving
    Number of Tips  Helix Angle (°)  55  Applicable Workpiece Materials  Aluminum: ◎  Material  Carbide  Surface Treatment  Non-coated 
    from S$12.99
    Min. 6 days
  15. Carbide / C coated 2-flute end mill (long blade length)
    MOLDINO (Former Hitachi Tool) Carbide / C coated 2-flute end mill (long blade length)
    Number of Tips  Helix Angle (°)  30  Surface Treatment  C coat  Material  Carbide (CARBIDE)  Specification  Medium finishing and finishing  Shank Diameter Tolerance (mm)  h6 
    from S$119.90
    Min. 3 days
  16. Estec Muscle 3-Flute End Mill Regular Blade
    SANKO MFG Estec Muscle 3-Flute End Mill Regular Blade
    Uses high-grade powder highs. The original blade mold enables from heavy cutting to finishing.
    Outer Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  50  Material  High-class powder HSS (STEC) 
    from S$46.99
    Min. 182 days
  17. Super hard long end mill 4-flute
    NACHI (NACHI-FUJIKOSHI) Super hard long end mill 4-flute
    A general-purpose end mill that can process copper, stainless steel, and aluminum. Suitable for wide side surface and deep side surface processing.
    Number of Tips  Helix Angle  Standard  Shank Diameter Tolerance (mm)  h7 
    from S$48.99
    Min. 4 days
  18. 4.0x 60mm end mill (TiN coat, Co-HSS / 4 blades)
    ESCO 4.0x 60mm end mill (TiN coat, Co-HSS / 4 blades)
    Blade Length (mm)  12  Blade Diameter (Φmm)  Number of Tips  Overall Length (mm)  60  Shank Diameter (Φmm)  Material  Cobalt heiss  Esco Part No.  EA824RB-4.0  Surface Treatment  TiN coat 
    from S$54.99
    Min. 6 days
  19. Radiuscutter
    Mitsubishi Materials Radiuscutter
    Radius cutter for high feed. Stable cutting is possible with a strong tip clamp. Coolant holes are standard equipment on both urban and shank types.
    from S$359.90
    Min. 4 days
  20. 3S end mill 6 blades special long blade 6XLF
    Fukuda Seiko (FKD) 3S end mill 6 blades special long blade 6XLF
    Shank Diameter (Φmm)  42  Number of Tips  Material  HSS-Co(SKH56) 
    from S$1,899.00
    Min. 5 days
  21. N coating REα nick end mill 3D type
    SANKO MFG N coating REα nick end mill 3D type
    Adopting a new surface treatment "N coating", it achieves a long life of 1.8 times or more compared to general products. Four types of blade lengths are available to suit your needs.
    Helix Angle (°)  30  Material  Cobalt high speed (HS-Co)  Surface Treatment  N coating 
    from S$87.99
    Min. 4 days
  22. Top cut series Composite multilayer coating AlTin
    EMUGE Top cut series Composite multilayer coating AlTin
    Universal end mill boasting ease of use and high cutting performance We do not choose opponents (workpieces) from steel, carbon steel, stainless steel, cast iron to difficult-to-cut materials such as titanium alloys and heat-resistant alloys, and high-hardness steel up to HRC55. Suppresses chatte... Read More
    Number of Tips  Material  Carbide  Surface Treatment  TiAlN 
    from S$86.99
    Min. 4 days
  23. D Solid end mill COAT
    ISCAR D Solid end mill COAT
    Carbide ball end mill Medium to finish processing in milling processing ※The image is an image.
    from S$87.99
    Min. 3 days
  24. DLC coated carbide end mill
    SANKO MFG DLC coated carbide end mill
    Blade Diameter (Φmm)  1.5  Number of Tips  Blade Length (mm)  Shank Diameter (Φmm)  Overall Length (mm)  40  Surface Treatment  DL (DLC) coating  Material  Ultra fine grain cemented carbide (MGC) 
    from S$58.99
    Min. 4 days
  25. Throwaway end mill
    Mitsubishi Materials Throwaway end mill
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$389.90
    Min. 5 days
  26. Carbide Square End Mill TiAlN Coated 4-Flute Gash Strong Twist
    MonotaRO Carbide Square End Mill TiAlN Coated 4-Flute Gash Strong Twist
    By adjusting the twist of the blade to 45 °, it is possible to cut high hardness materials and high feed machining, and the rigidity is also increased. In addition, it can be machined for a long time and the cut surface is finished cleanly. * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.02  Number of Tips  Helix Angle (°)  45  Material  Cemented carbide  Cutting Edge Shape  Gouache guess  Surface Treatment  TiAlN 
    Rating:
    82%
    from S$23.99
    Min. 2 days
  27. Carbide Long Neck Square End Mill TiAlN Coat 2 Flute
    MonotaRO Carbide Long Neck Square End Mill TiAlN Coat 2 Flute
    Tool interference during deep engraving can be avoided. * Please use protective goggles when working as there is a risk of damage. * Do not touch the cutting edge with your bare hands. * Be careful not to get injured by scattering chips or wrapping.
    Blade Diameter Tolerance (mm)  0~-0.02  Neck angle (°)  15  Number of Tips  Helix Angle (°)  30  Material  Carbide  Surface Treatment  TiAlN  Shank Diameter Tolerance  h6 
    Rating:
    83%
    from S$13.99
    Min. 2 days
  28. Carbide Square End Mill TiAlN Coated 4-Flute 2.5D Pincad
    MonotaRO Carbide Square End Mill TiAlN Coated 4-Flute 2.5D Pincad
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Maximum Drilling Capacity  2.5D  Helix Angle (°)  30  Number of Tips  Material  Cemented carbide  Surface Treatment  TiAIN  Type  Tip pin type 
    Rating:
    92%
    from S$16.99
    Min. 2 days
  29. Carbide Ball End Mill TiAlN Coat 2 Flute
    MonotaRO Carbide Ball End Mill TiAlN Coat 2 Flute
    * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.030  Number of Tips  Helix Angle (°)  30  Surface Treatment  TiAIN  Coating  TiAlN 
    Rating:
    66%
    from S$15.99
    Min. 2 days
  30. BSK end mill case
    MAKINO BSK end mill case
    With an adjuster mechanism, it can be adjusted according to the length of the stored items. Because it is transparent, you can see the inside well. The durable case protects the stored items. As a tool case for drills, etc., for managing small items
    Number of Storage (pieces)  Specification  Body, lid set 
    Rating:
    86%
    from S$0.97
    Min. 2 days
  31. High sluffing end mill, short, 4-flute
    MonotaRO High sluffing end mill, short, 4-flute
    * Do not use for anything other than its intended purpose.
    Helix Angle (°)  30  Number of Tips  Material  Cobalt high speed steel 
    Rating:
    95%
    from S$24.99
    Min. 2 days
  32. Carbide Square End Mill TiAlN Coated 2-Flute 2D Pincad
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2D Pincad
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Maximum Drilling Capacity  2D  Helix Angle (°)  30  Material  Cemented carbide  Surface Treatment  TiAlN  Type  Tip pin type 
    Rating:
    100%
    from S$9.19
    Min. 2 days
  33. Carbide End Mill for Resin
    MonotaRO Carbide End Mill for Resin
    By manufacturing with an end mill using a fine-grained whetstone, the surface accuracy of the resin machined surface can be finely finished, and it can also be used for aluminum processing. Processing of resin, aluminum, etc. * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.02  Number of Tips  Helix Angle (°)  30  Material  Cemented carbide  Tip Shape  Pinkado 
    Rating:
    85%
    from S$23.99
    Min. 2 days
  34. BSK end mill drill case
    MAKINO BSK end mill drill case
    With an adjuster mechanism, it can be adjusted according to the length of the stored items. Because it is transparent, you can see the inside well. The durable case protects the stored items. As a tool case for end mills and drills. For managing small items.
    Number of Storage (pieces)  Specification  Body, lid set  Material  Polypropylene (PP) 
    Rating:
    92%
    from S$1.19
    Min. 2 days
  35. Carbide long neck ball end mill, AlCrN coated, 2-flute
    MonotaRO Carbide long neck ball end mill, AlCrN coated, 2-flute
    Made by a safe domestic manufacturer. Abrasion resistance is improved by using AlCrN coating. Since it is a deep rib type, tool interference during deep engraving can be avoided. For deep carving. * Be sure to wear protective equipment when using as there is a risk of injury. * Do not use for any... Read More
    Number of Tips  2 blades  Helix Angle  30θ  Surface Treatment  AlCrN coating  Material  Carbide 
    Rating:
    91%
    from S$15.99
    Min. 2 days
  36. Carbide Square End Mill TiAlN Coated 2-Flute 3D Gash
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 3D Gash
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Maximum Drilling Capacity  3D  Material  Cemented carbide  Type  Cutting edge gash pad  Surface Treatment  TiAlN 
    Rating:
    92%
    from S$9.89
    Min. 2 days
  37. Carbide Square End Mill TiAlN Coated 2-Flute 3D Pincad
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 3D Pincad
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Maximum Drilling Capacity  3D  Material  Cemented carbide  Surface Treatment  TiAlN  Type  Tip pin type 
    Rating:
    80%
    from S$9.89
    Min. 2 days
  38. Micro Carbide End Mills
    TCT Japan Micro Carbide End Mills
    Carbide 2-flute square end mill with excellent wear resistance. A sharp edge design has been achieved with a unique cutting edge design. Suitable for processing a wide variety of work materials such as non-ferrous metals, plastics, resins, carbon fibers, wood, paper, concrete and glass.
    Shank Diameter (Φmm)  3.175  Overall Length (mm)  38.1  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  39. High-speed end mill for aluminum, short, 2-flute
    MonotaRO High-speed end mill for aluminum, short, 2-flute
    * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  42  Shank Diameter Tolerance (mm)  h6 
    Rating:
    83%
    from S$13.99
    Min. 2 days
  40. 2-Flute MSTAR End Mill (M)
    Mitsubishi Materials 2-Flute MSTAR End Mill (M)
    A unique coating that applies miracle coating technology. General-purpose 2-flute square end mill General purpose * If you order by cash on delivery, it may be shipped the next day or later.
    Number of Tips  Helix Angle (°)  30  Surface Treatment  MS coating  Cutting Edge Shape  Pinkado  Shape  Square  Material  Ultra fine particle carbide 
    Rating:
    93%
    from S$24.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 4442

Set Ascending Direction