All Category

Roughing High-Speed End Mills

A roughing end mill is a type of end mill used for cutting. It is called a roughing end mill because the shape of the blade is wavy called a roughing blade. Roughing end mills have low cutting resistance due to the shape of the blade, so they can be cut large, so they are mainly used for rough cutting and are not suitable for finishing. Depending on the length of the cutting blade, there are short, medium, and long types. It is a roughing end mill for roughing, but depending on the product, it can be processed at the same level as medium finish. Most of the materials are cobalt highs. We can process carbon steel, alloy steel, stainless steel, aluminum alloy, etc.
View : Grid List
Filter

Items 1 - 40 of 195

Set Ascending Direction
  1. SG-FAX Roughing end mill Fine pitch short
    NACHI (NACHI-FUJIKOSHI) SG-FAX Roughing end mill Fine pitch short
    SG coating is applied to powdered highs to enable high-efficiency machining like carbide. Lifespan is more than 3 times that of conventional products. Supports from mold steel to difficult-to-cut materials. Carbon steel, alloy steel, pre-hardened steel, die steel, heat resistant alloy, cast iron,... Read More
    Surface Treatment  SG (TiCN) coating  Helix Angle  Standard  Tolerance (μm)  ±100 
    from S$99.90
    Min. 4 days
  2. N coating REα nick end mill 3D type
    SANKO MFG N coating REα nick end mill 3D type
    Adopting a new surface treatment "N coating", it achieves a long life of 1.8 times or more compared to general products. Four types of blade lengths are available to suit your needs.
    Helix Angle (°)  30  Material  Cobalt high speed (HS-Co)  Surface Treatment  N coating 
    from S$87.99
    Min. 4 days
  3. High sluffing end mill, short, 4-flute
    MonotaRO High sluffing end mill, short, 4-flute
    * Do not use for anything other than its intended purpose.
    Helix Angle (°)  30  Number of Tips  Material  Cobalt high speed steel 
    Rating:
    95%
    from S$24.99
    Min. 2 days
  4. Heavy end mill
    NACHI (NACHI-FUJIKOSHI) Heavy end mill
    A general-purpose roughing end mill that can process from steel to stainless steel and aluminum. A special nick provides a machined surface comparable to a medium finish. Square end mill 4-flute. (Center cut)
    Number of Tips 
    Rating:
    100%
    from S$43.99
    Min. 2 days
  5. Cobalt High Speed End Mill Roughing Medium EX-REEN
    OSG Cobalt High Speed End Mill Roughing Medium EX-REEN
    Medium blade series of heavy cutting roughing end mills.
    Helix Angle (°)  30 
    Rating:
    70%
    from S$68.99
    Min. 2 days
  6. Cobalt High Speed End Mill Roughing Short EX-REES
    OSG Cobalt High Speed End Mill Roughing Short EX-REES
    A series of short blades for heavy cutting roughing end mills.
    Helix Angle (°)  30 
    from S$64.99
    Min. 2 days
  7. AG Mill Raffle Regular Length Short
    NACHI (NACHI-FUJIKOSHI) AG Mill Raffle Regular Length Short
    High-speed and high-efficiency roughing can be performed from steel to stainless steel and aluminum. Nick has a fine pitch.
    Surface Treatment  AG (TiAlN) coat  Helix Angle  Standard  Shank Diameter Tolerance  h7  Outer Diameter Tolerance (mm)  ±0.1 
    from S$76.99
    Min. 2 days
  8. AG Mill Heavy
    NACHI (NACHI-FUJIKOSHI) AG Mill Heavy
    Maximizes the balance between wear resistance and toughness / chipping resistance, enables high-efficiency machining, and achieves long life.
    Number of Tips  Surface Treatment  AG (TiAlN) coat  Helix Angle  Standard 
    Rating:
    100%
    from S$53.99
    Min. 2 days
  9. Cobalt High Speed ​​End Mill TiN Coat Roughing Short Fine Pitch EX-TIN-RESF
    OSG Cobalt High Speed ​​End Mill TiN Coat Roughing Short Fine Pitch EX-TIN-RESF
    Roughing end mill short blade series for heavy cutting with TiN coating. * If you order by cash on delivery, it may be shipped the next day or later.
    Helix Angle (°)  30  Surface Treatment  TiN coating 
    from S$87.99
    Min. 2 days
  10. Roughing end mill short
    NACHI (NACHI-FUJIKOSHI) Roughing end mill short
    Roughing is possible from steel to stainless steel and aluminum. Long shank, short blade length type
    Helix Angle  Standard  Shank Diameter Tolerance  h7  Blade Diameter Tolerance (mm)  ±0.1  Outer Diameter Tolerance (mm)  ±0.1 
    Rating:
    100%
    from S$58.99
    Min. 4 days
  11. Roughing end mill Medium blade
    Mitsubishi Materials Roughing end mill Medium blade
    It is an end mill for rough cutting that uses a full R corrugated blade shape to reduce cutting resistance and enable heavy cutting. For roughing
    Helix Angle (°)  30  Number of Tips  Cutting Edge  Center cut square end blade  Shape  Square 
    Rating:
    100%
    from S$75.99
    Min. 2 days
  12. Cobalt High Speed End Mill Roughing Long EX-REEL
    OSG Cobalt High Speed End Mill Roughing Long EX-REEL
    A long blade series of heavy cutting roughing end mills.
    Helix Angle (°)  30 
    Rating:
    60%
    from S$87.99
    Min. 2 days
  13. Heavy long
    NACHI (NACHI-FUJIKOSHI) Heavy long
    Roughing is possible from steel to stainless steel and aluminum. Uses a blade length longer than the standard.
    Number of Tips  Endmill Shape / Tooth Number  Square end mill, 4-flute  Helix Angle  Standard  Shank Diameter Tolerance  h7 
    from S$49.99
    Min. 4 days
  14. Stainless steel end mill for groove processing
    SANKO MFG Stainless steel end mill for groove processing
    * If you order by cash on delivery, it may be shipped the next day or later.
    Dimension Tolerance (mm)  0~-0.04  Helix Angle (°)  35 
    from S$46.99
    Min. 4 days
  15. AG Mill Heavy
    NACHI (NACHI-FUJIKOSHI) AG Mill Heavy
    Maximizes the balance between wear resistance and toughness / chipping resistance, enables high-efficiency machining, and achieves long life.
    Number of Tips  Surface Treatment  AG (TiAlN) coat  Helix Angle  Standard 
    Rating:
    100%
    from S$76.99
    Min. 4 days
  16. Cobalt High Speed ​​End Mill TiN Coat Roughing Medium Fine Pitch EX-TIN-RENF
    OSG Cobalt High Speed ​​End Mill TiN Coat Roughing Medium Fine Pitch EX-TIN-RENF
    Roughing end mill medium blade for heavy cutting with TiN coating. Since it has a TiN coating, it has excellent anti-welding and wear resistance.
    Helix Angle (°)  30  Surface Treatment  TiN coating 
    Rating:
    100%
    from S$109.90
    Min. 3 days
  17. Roughing end mill
    MOLDINO (Former Hitachi Tool) Roughing end mill
    Material  Cobalt heiss 
    from S$53.99
    Min. 4 days
  18. AG Mill Roughing Short
    NACHI (NACHI-FUJIKOSHI) AG Mill Roughing Short
    High-speed and high-efficiency roughing can be performed from steel to stainless steel and aluminum. Nick has a fine pitch.
    Surface Treatment  AG (TiAlN) coat  Helix Angle  Standard  Shank Diameter Tolerance  h7  Outer Diameter Tolerance (mm)  ±0.1 
    from S$76.99
    Min. 4 days
  19. Roughing end mill Medium blade
    Mitsubishi Materials Roughing end mill Medium blade
    It is an end mill for rough cutting that uses a full R corrugated blade shape to reduce cutting resistance and enable heavy cutting. For roughing * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Helix Angle (°)  30  Number of Tips  Shape  Square 
    from S$89.99
    Min. 3 days
  20. α Nick End Mill Hard Type
    SANKO MFG α Nick End Mill Hard Type
    * If you order by cash on delivery, it may be shipped the next day or later.
    Material  Cobalt heiss 
    from S$46.99
    Min. 4 days
  21. Roughing end mill short-HQS
    MOLDINO (Former Hitachi Tool) Roughing end mill short-HQS
    Helix Angle  30°  Performance  High efficiency machining  Specification  Roughing  Shank Diameter Tolerance  h7 
    Rating:
    80%
    from S$58.99
    Min. 3 days
  22. Roughing end mill medium
    NACHI (NACHI-FUJIKOSHI) Roughing end mill medium
    Roughing is possible from steel to stainless steel and aluminum. Standard shank, medium blade length type
    Helix Angle  Standard  Shank Diameter Tolerance  h7  Blade Diameter Tolerance (mm)  ±0.1  Outer Diameter Tolerance (mm)  ±0.1 
    from S$66.99
    Min. 4 days
  23. Powder High Speed ​​End Mill V Coat XPM Roughing Medium Fine Pitch VP-RENF
    OSG Powder High Speed ​​End Mill V Coat XPM Roughing Medium Fine Pitch VP-RENF
    Powder high speed XPM roughing medium blade series with V coating. It is also effective for difficult-to-cut materials.
    Helix Angle (°)  30  Surface Treatment  V coating (composite multilayer coating) 
    from S$139.90
    Min. 3 days
  24. Α Nick End Mill for Aluminum
    SANKO MFG Α Nick End Mill for Aluminum
    * If you order by cash on delivery, it may be shipped the next day or later.
    Material  Cobalt heiss 
    Rating:
    100%
    from S$48.99
    Min. 4 days
  25. Cobalt High Sluffing End Mill Tuf-Nick Gold Medium TFGN
    OSG Cobalt High Sluffing End Mill Tuf-Nick Gold Medium TFGN
    Helix Angle (°)  25  Number of Tips  Surface Treatment  TiN coating 
    from S$86.99
    Min. 3 days
  26. α Nick End Mill Short Blade
    SANKO MFG α Nick End Mill Short Blade
    * If you order by cash on delivery, it may be shipped the next day or later.
    Helix Angle (°)  30  Number of Tips  Material  Cobalt high speed (HS-Co) 
    from S$58.99
    Min. 4 days
  27. SG-FAX Heavy
    NACHI (NACHI-FUJIKOSHI) SG-FAX Heavy
    Highly efficient roughing can be performed from steel to stainless steel and aluminum. A special nick provides a machined surface comparable to a medium finish.
    Surface Treatment  SG (TiCN) coating  Helix Angle  Standard 
    from S$76.99
    Min. 4 days
  28. AG Mill Roughing Long
    NACHI (NACHI-FUJIKOSHI) AG Mill Roughing Long
    High-speed and high-efficiency roughing can be performed from steel to stainless steel and aluminum. Nick has a fine pitch.
    Surface Treatment  AG (TiAlN) coat  Coating  AG (TiAlN) coat  Helix Angle  Standard  Shank Diameter Tolerance  h7  Outer Diameter Tolerance (mm)  ±0.1 
    from S$87.99
    Min. 4 days
  29. Roughing End Mill Regular-HQR
    MOLDINO (Former Hitachi Tool) Roughing End Mill Regular-HQR
    Helix Angle  30°  Performance  High efficiency machining  Specification  Roughing  Shank Diameter Tolerance  h7 
    Rating:
    100%
    from S$69.99
    Min. 3 days
  30. AG Mill Heavy
    NACHI (NACHI-FUJIKOSHI) AG Mill Heavy
    Maximizes the balance between wear resistance and toughness / chipping resistance, enables high-efficiency machining, and achieves long life.
    Dimension Tolerance (mm)  +0.052~0  Surface Treatment  AG (TiAlN) coat  Helix Angle  Standard 
    Rating:
    80%
    from S$159.90
    Min. 4 days
  31. α Nick End Mill Short Blade
    SANKO MFG α Nick End Mill Short Blade
    It is a normal pitch type roughing end mill. * If you order by cash on delivery, it may be shipped the next day or later.
    Helix Angle (°)  30  Number of Tips  Material  Cobalt high speed (HS-Co) 
    from S$46.99
    Min. 4 days
  32. SG-FAX Roughing End Mill Fine Pitch Long
    NACHI (NACHI-FUJIKOSHI) SG-FAX Roughing End Mill Fine Pitch Long
    SG coating is applied to powdered highs to enable high-efficiency machining like carbide. Lifespan is more than 3 times that of conventional products. Supports from mold steel to difficult-to-cut materials.
    Surface Treatment  SG (TiCN) coating  Helix Angle  Standard  Tolerance (μm)  ±100 
    from S$129.90
    Min. 4 days
  33. Cobalt High Speed ​​End Mill Rough and Finish Short RFES
    OSG Cobalt High Speed ​​End Mill Rough and Finish Short RFES
    The rough and finish end mill adopts a unique trapezoidal blade shape that considers finish cutting as well as heavy cutting. It has a right-angled shaft nick that can withstand heavy cutting and a cutting edge strength.
    Helix Angle (°)  25  Material  Cobalt high speed steel (HSS-Co)  Act on Promoting Green Procurement  Conformity  RoHS directive (corresponding to 10 substances)  Correspondence  Surface Treatment  Non-coated 
    from S$76.99
    Min. 5 days
  34. Cobalt High Speed ​​End Mill Roughing Long Shank Short EX-LS-REES
    OSG Cobalt High Speed ​​End Mill Roughing Long Shank Short EX-LS-REES
    Long shank series of heavy cutting roughing end mills.
    Helix Angle (°)  30  Act on Promoting Green Procurement  Conformity  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$87.99
    Min. 5 days
  35. S coat fine pitch end mill short
    SANKO MFG S coat fine pitch end mill short
    Fine pitch type roughing end mill with S (TiCN) coating. The allowance for finishing can be reduced. * If you order by cash on delivery, it may be shipped the next day or later.
    Helix Angle (°)  30  Number of Tips  Material  Cobalt high speed (HS-Co)  Surface Treatment  S (TiCN) coating  Coating  S (TiCN) coating 
    from S$75.99
    Min. 4 days
  36. S coat fine pitch end mill short
    SANKO MFG S coat fine pitch end mill short
    * If you order by cash on delivery, it may be shipped the next day or later.
    Helix Angle (°)  30  Number of Tips  Material  Cobalt high speed (HS-Co)  Coating  S (TiCN) coating  Surface Treatment  S (TiCN) coating 
    from S$189.90
    Min. 4 days
  37. Powder High Speed ​​End Mill V Coat XPM Roughing Short Fine Pitch VP-RESF
    OSG Powder High Speed ​​End Mill V Coat XPM Roughing Short Fine Pitch VP-RESF
    Powder high speed XPM roughing short blade series with V coating. It has a blade shape that emphasizes chip evacuation.
    Helix Angle (°)  30  Surface Treatment  V coating (composite multilayer coating) 
    from S$129.90
    Min. 3 days
  38. P coating Xα nick
    SANKO MFG P coating Xα nick
    * If you order by cash on delivery, it may be shipped the next day or later.
    Number of Tips  Material  Cobalt heiss 
    Rating:
    100%
    from S$67.99
    Min. 4 days
  39. Cobalt High Speed ​​End Mill Roughing Extra Long EX-REXL
    OSG Cobalt High Speed ​​End Mill Roughing Extra Long EX-REXL
    Helix Angle (°)  30  Number of Tips  Material  Cobalt high speed steel (HSS-Co) 
    from S$389.90
    Min. 5 days
  40. α Nick End Mill Hard Type Regular Blade
    SANKO MFG α Nick End Mill Hard Type Regular Blade
    * If you order by cash on delivery, it may be shipped the next day or later.
    Material  Cobalt heiss 
    from S$49.99
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 195

Set Ascending Direction