Ball Cemented Carbide End Mills
A ball end mill is a cutting tool with a cutting edge. By rotating this cutting tool at high speed, it is possible to machine various places such as walls, holes and grooves. The feature is that the bottom blade is spherical, and it is mainly used to create various curved shapes. Another feature is that it can be used for a variety of machining shapes, such as cutting the plastic part. Ball end mills can also be used according to the material to be processed, such as for resin and aluminum.
Other Related Pages
ISCAR D Solid end mill COATCarbide ball end mill Medium to finish processing in milling processing ※The image is an image.from S$87.99Min. 3 days- MonotaRO Carbide Ball End Mill TiAlN Coat 2 Flute* Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0～-0.030 Number of Tips 2 Helix Angle (°) 30 Surface Treatment TiAIN Coating TiAlN
- MonotaRO Carbide long neck ball end mill, AlCrN coated, 2-fluteMade by a safe domestic manufacturer. Abrasion resistance is improved by using AlCrN coating. Since it is a deep rib type, tool interference during deep engraving can be avoided. For deep carving. * Be sure to wear protective equipment when using as there is a risk of injury. * Do not use for any... Read MoreNumber of Tips 2 blades Helix Angle 30θ Surface Treatment AlCrN coating Material Carbide
- NS TOOL Ball end mill for resin3x blade length, 5x blade length, 10x blade length, super long neck, same diameter type, etc. can be selected according to the processing shape! Can also be used for non-ferrous metals such as aluminum and copper. * If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Helix Angle (°) 30 Material Ultra fine cemented carbide
- NS TOOL Infinite coating 2-flute ball end millSupports precision 3D machining from low speed to high speed. * If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Helix Angle (°) 30 Workable Hardness Can process up to 55HRC Material Ultra fine cemented carbide
- PROCHI 2 Flute Carbide Ball End Mill V SeriesReduces wear on the cutting edge during machining. * Use a downcut to prevent damage to the blade due to secondary cutting of the blade and insert. * If vibration or abnormal noise is generated by the workpiece or machine during cutting, change the cutting conditions according to the situation. ※... Read MoreHardness HRC (Blade) 15～40 Number of Tips 2 Helix Angle (°) 30 Material Carbide Surface Treatment TiAlN coatingfrom S$19.99Min. 2 days
- NS TOOL Long neck ball hard (for high hardness)Infinite coating premium for high hardness and unique new shape have excellent chipping resistance, and the finished surface is improved by suppressing chattering. Compatible with high hardness materials up to 65HRC. * If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Helix Angle (°) 30 Workable Hardness Can process up to 65HRC Surface Treatment Infinite coating premium Material Ultra fine cemented carbide
- NS TOOL Aluminum Ball End MillNS's unique blade shape suppresses chattering during corner and side machining! * If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Helix Angle (°) 25 Material Ultra fine cemented carbide
- NS TOOL 2-flute ball end mill for high hardnessStandard type ball end mill for high hardness. Ideal for finishing. Compatible with high hardness materials up to 65HRC. * If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Helix Angle (°) 30 Workable Hardness Can process up to 65HRC Surface Treatment Infinite coating premium Material Ultra fine cemented carbidefrom S$33.99Min. 2 days
- NS TOOL Infinite coating deep rib ball end mill (long neck ball end mill)A neck escape type suitable for narrow and deep processing. Supports deep carving precision 3D machining from low speed to high speed. * If you order by cash on delivery, it may be shipped the next day or later.Ball Radius R (mm) 1 Diameter below Neck d2 (mm) 1.94 Neck Angle γ (°) 12 Blade Diameter (Φmm) 2 Number of Tips 2 Helix Angle (°) 30 Workable Hardness Can process up to 62HRC Material Ultra fine cemented carbide R Tolerance (mm) ±0.005
- NS TOOL 2-flute ball end mill for high hardness MRBH230* If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Material Ultra fine carbidefrom S$36.99Min. 5 days
- NS TOOL Infinite coating deep rib ball end mill (long neck ball end mill)A neck escape type suitable for narrow and deep processing. Supports deep carving precision 3D machining from low speed to high speed. * If you order by cash on delivery, it may be shipped the next day or later.Ball Radius R (mm) 0.5 Diameter below Neck d2 (mm) 0.95 Blade Diameter (Φmm) 1 Neck Angle γ (°) 12 Number of Tips 2 Helix Angle (°) 30 Workable Hardness Can process up to 62HRC Material Ultra fine cemented carbide R Tolerance (mm) ±0.005
- PROCHI 2-flute carbide ball end millCarbide ball end mill made of high quality German base material. Large pockets for smooth chip evacuation. Machining efficiency is improved with a sharp design blade. We have achieved the best cost performance in response to requests from the field. * When removing the tool from the case, be care... Read MoreDimension Tolerance (mm) (Blade)) d ≦ 120-−0.02 ・ 12 <d0-−0.03 Helix Angle (°) 30 Material Cemented carbide (German base material) Surface Treatment TiAlN
- PROCHI 4-flute carbide ball end millCarbide ball end mill made of high quality German base material. Large pockets for smooth chip evacuation. Machining efficiency is improved with a sharp design blade. * When removing the tool from the case, be careful not to let the tool pop out or drop. * Be careful not to touch the cutting edge... Read MoreHelix Angle (°) 35 Number of Tips 4 Material Cemented carbide (German base material) Surface Treatment TiAlNfrom S$44.99Min. 3 days
- NS TOOL Ball end mill for aluminum (DLC coating)Uses NS's unique DLC coating with high adhesion, making it suitable for long-term processing. Curved surface processingNumber of Tips 2 Helix Angle (°) 25 Material Cemented carbide Surface Treatment DLC coatingfrom S$58.99Min. 5 days
- OSG Carbide Long Neck Ball End Mill WXL Coat 2 Blades (Deep Rib Ball Type) WXL-LN-EBD* If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Helix Angle (°) 30 Material Cemented carbide Surface Treatment WXL coating R Tolerance (mm) ±0.005from S$43.99Min. 3 days
- NS TOOL MUGEN coating + short shank ball EM + MSB230SF* If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Material Ultra fine carbidefrom S$36.99Min. 5 days
- NACHI (NACHI-FUJIKOSHI) DLC millballDLC coating allows dry processing of aluminum. Suitable for curved surface processing.Number of Tips 2 Material Cemented carbide Surface Treatment DLC coat Helix Angle Standard R Tolerance (mm) ±0.01from S$87.99Min. 4 days
-
- THECUT New carbide 2-flute ball end mill (TiSiN) (The) cut millCompatible with a wide range of steel materials with HRC50 or less with TiSiN coating. Also supports use on high-speed machines. Achieves overwhelming cost performance with a long life.Number of Tips 2 Material Ultrafine particle cemented carbide (MG) Surface Treatment V3 (TiSiN) coatingfrom S$24.99Min. 4 days
- OSG Carbide WXL Coat 2-Flute Ball End Type (HSK Compatible) WXL-HS-EBDNumber of Tips 2 Helix Angle (°) 30 Material Cemented carbide Surface Treatment WXL coatingfrom S$29.99Min. 3 days
- OSG Carbide Ball End Mill 2 Flute for Copper / Aluminum Alloy / Plastic CAP-EBDBall end mills for copper, aluminum alloys and plastics. It has good sharpness and good chip evacuation. ◎ Copper alloy ◎ Aluminum alloy ◎ Plastic shrink fit (shrink fit) system is also recommended. * R2 x 4-4-4 indicates a shank diameter of 4 mm.Number of Tips 2 Helix Angle (°) 30 Material Cemented carbide Surface Treatment Non-coated Tolerance for Corner Radius ±0.01from S$139.90Min. 3 days
- NS TOOL Ball end mill for processing diamond coated hard and brittle materialsUses a spiral ball shape that achieves both cutting edge strength and sharpness, and a newly developed diamond coating that enhances adhesion. Curved surface processingNumber of Tips 2 Helix Angle (°) 20 Shank Diameter (Φmm) 4 Overall Length (mm) 45 Material Cemented carbide Surface Treatment Diamond coatingfrom S$299.90Min. 5 days
- NS TOOL MUGEN Coating + Deep Rib Ball End Mill (Long Neck Ball End Mill)A neck escape type suitable for narrow and deep processing. Supports deep carving precision 3D machining from low speed to high speed. * If you order by cash on delivery, it may be shipped the next day or later.Ball Radius R (mm) 0.75 Diameter below Neck d2 (mm) 1.45 Blade Diameter (Φmm) 1.5 Neck Angle γ (°) 12 Number of Tips 2 Helix Angle (°) 30 Workable Hardness Can process up to 62HRC Surface Treatment Infinite coating (TiAlN series) Material Ultra fine cemented carbide R Tolerance (mm) ±0.005from S$39.99Min. 5 days
- PROCHI 2-flute ball end mill for aluminumA ball end mill made of high quality German base material. Large pockets for smooth chip evacuation. Machining efficiency is improved with a sharp design blade. * When removing the tool from the case, be careful not to let the tool pop out or drop. * Be careful not to touch the cutting edge direc... Read MoreNumber of Tips 2 Helix Angle (°) 30 Material Cemented carbide (German base material) Abrasive Materials HRC50 or less, aluminum system Surface Treatment Non-coatedfrom S$39.99Min. 5 days
- NS TOOL Taper neck ball EM + MRBTN230* If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Material Ultra fine carbidefrom S$58.99Min. 5 days
- NS TOOL Ball end mill for micro processing "Micro Ball"World's first! Standardized from R size 0.005. We will open up further fields in the field of microfabrication. The world's smallest ball end mill "Micro Ball" expands the area of microfabrication. Adopting NS's original R part shape, a good finish can be obtained.Helix Angle (°) 0 Number of Tips 1 Neck Angle γ (°) 15 Shank Diameter (Φmm) 4 Overall Length (mm) 45 Material Ultra-fine particle cemented carbidefrom S$87.99Min. 5 days
- NS TOOL Infinite coating long ball end millInfinite coating is used for the long ball end mill. The size is R0.5 to R5. Processing that makes the best use of the long shank is possible. * If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Helix Angle 30° Workable Hardness Can process up to 55HRC Surface Treatment Infinite coating (TiAlN series) Material Ultra fine cemented carbide R Tolerance (mm) ±0.01from S$119.90Min. 5 days
- NS TOOL 3-Flute Ball EM + MSBH345 for High Hardness* If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 3 Shank Diameter (Φmm) 6 Material Ultra fine carbidefrom S$99.90Min. 5 days
- NS TOOL MUGEN Coating + Deep Rib Ball End Mill (Long Neck Ball End Mill)A neck escape type suitable for narrow and deep processing. Supports deep carving precision 3D machining from low speed to high speed. * If you order by cash on delivery, it may be shipped the next day or later.Ball Radius R (mm) 0.1 Diameter below Neck d2 (mm) 0.18 Blade Diameter (Φmm) 0.2 Neck Angle γ (°) 12 Number of Tips 2 Helix Angle (°) 30 Workable Hardness Can process up to 62HRC Surface Treatment Infinite coating (TiAlN series) Material Ultra fine cemented carbide R Tolerance (mm) ±0.005from S$69.99Min. 5 days
- NS TOOL Mugen coating deep rib ball end mill (long neck ball end mill) -MRB230* If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Material Ultra fine carbidefrom S$36.99Min. 5 days
- NS TOOL Infinite coating deep rib ball end mill (long neck ball end mill)A neck escape type suitable for narrow and deep processing. Supports deep carving precision 3D machining from low speed to high speed. * If you order by cash on delivery, it may be shipped the next day or later.Neck Angle γ (°) 12 Number of Tips 2 Blade Length (mm) 3 Diameter below Neck d2 (mm) 3.8 Helix Angle (°) 30 Blade Diameter (Φmm) 4 Shank Diameter (Φmm) 6 Workable Hardness Can process up to 62HRC Surface Treatment Infinite coating (TiAlN series) Material Ultra fine cemented carbide R Tolerance (mm) ±0.01from S$43.99Min. 5 days
- NS TOOL Infinite coating deep rib ball end mill (long neck ball end mill)A neck escape type suitable for narrow and deep processing. Supports deep carving precision 3D machining from low speed to high speed. * If you order by cash on delivery, it may be shipped the next day or later.Ball Radius R (mm) 1.5 Neck Angle γ (°) 12 Number of Tips 2 Blade Length (mm) 2.5 Diameter below Neck d2 (mm) 2.85 Blade Diameter (Φmm) 3 Helix Angle (°) 30 Shank Diameter (Φmm) 6 Workable Hardness Can process up to 62HRC Surface Treatment Infinite coating (TiAlN series) Material Ultra fine cemented carbide R Tolerance (mm) ±0.005from S$39.99Min. 5 days
-
- OSG Carbide Ball End Mill FX Coat 2 Flute Long Shank FX-LS-MG-EBDNumber of Tips 2 Helix Angle (°) 30 Material Carbide (CARBIDE) Surface Treatment FX (TiAIN system) coating R Tolerance (mm) ±0.01from S$189.90Min. 3 days
- NS TOOL Aluminum Ball EM + ALB225* If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Material Cemented carbidefrom S$38.99Min. 5 days
- NS TOOL MUGEN Coating + Deep Rib Ball End Mill (Long Neck Ball End Mill)A neck escape type suitable for narrow and deep processing. Supports deep carving precision 3D machining from low speed to high speed. * If you order by cash on delivery, it may be shipped the next day or later.Ball Radius R (mm) 0.4 Diameter below Neck d2 (mm) 0.76 Blade Diameter (Φmm) 0.8 Neck Angle γ (°) 12 Number of Tips 2 Helix Angle (°) 30 Workable Hardness Can process up to 62HRC Surface Treatment Infinite coating (TiAlN series) Material Ultra fine cemented carbidefrom S$39.99Min. 5 days
- MOLDINO (Former Hitachi Tool) Ball End Mill for High Hardness Steel Machining Epoch Deep Ball Evolution Hard-TH3 (EPDBEH-TH3)Number of Tips 2 Material Cemented carbide Surface Treatment TH3 coatfrom S$43.99Min. 3 days
- SANKO MFG SA coated carbide 2-flute ball long shank end millSAGCBE's long shank end mill. It is possible to process deep parts. * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.Tolerance for Ball Endmill Radius (mm) 0～-0.03 Number of Tips 2 Helix Angle (°) 30 Surface Treatment SA coating Material Ultra-fine particle cemented carbidefrom S$119.90Min. 4 days
- NS TOOL Infinite ball end mill* If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Surface Treatment Infinite coating Material Ultra fine carbidefrom S$48.99Min. 5 days
