Special Purpose Cutters
A cutter is a tool intended to be mounted on a milling machine for cutting. There are various types of cutters, such as angle cutters, key sheet cutters, umbrella cutters, and big bone cutters, depending on the shape and purpose of processing. The angle cutter is used for dovetail machining and flat cutting according to the angle of the tool. When performing surface cutting, it is necessary to carefully check the material and cutting conditions. A key sheet cutter is used for keyway processing. The key is to transmit power efficiently, and the groove that points to the key is called the key groove. Big bone cutters are used for grooving and roughing of wood and plastic.
TPT Chamfering Drill for Countersunk ScrewDrilling and sinking holes for countersunk head screws can be performed at the same time. Work Material: Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel, Cast Iron, Aluminum AlloyTip Angle (°) 118 Helix Angle of Larger Diameter Part (°) 30 Surface Treatment Homo processing- TPT Chamfer Drill for Cap BoltTip Angle (°) 118 Helix Angle of Larger Diameter Part (°) 30 Surface Treatment Homo processing
- MonotaRO Submerged Milling Cutter* Do not use for anything other than its intended purpose.Material High speed steel HSS Surface Treatment TiN coating Blade Diameter Tolerance (mm) ±0.01
- NACHI (NACHI-FUJIKOSHI) Counterbore Drill for Hexagon Socket Head Cap ScrewTip Angle (°) 118 Helix Angle (°) 22～25 Material HSS Coating Non-coated
- Fukuda Seiko (FKD) Submerged Milling Machine (for Hexagon Socket Head Bolts)Counterbore cutter for sinking the head of a hexagon socket head cap screwOuter Diameter Tolerance (mm) 0～+0.2 Guide Diameter Tolerance (mm) 0～-0.05 Number of Tips 4 Material High speed steel HSS Lead Angle Right angle 25 °
- MonotaRO T slot cutterFor grooving * Do not use for anything other than its intended purpose.Material High speed steel HSS
- Fukuda Seiko (FKD) T slot cutterIdeal for grooving and milling.Blade Thickness Tolerance (mm) 0～+0.1 Material HSS
- Fukuda Seiko (FKD) Angle Cutter with HandleIdeal for grooving and angled machining.Angle Tolerance ±15'
-
- Fukuda Seiko (FKD) Submerged milling machine for countersunk screwA milling cutter that drills sink holes for countersunk head screws. Work Material: Carbon Steel, Alloy Steel, Tool Steel, Cast Iron, Non-Ferrous Metals, Aluminum Alloy.Specification Countersunk machine screw Material High speed steel (SKH51)
- Fukuda Seiko (FKD) Submerged Milling Machine for Countersunk Screw with DrillDrill diameter tolerance (mm) 0～-0.05 Outer Diameter Tolerance (mm) 0～±0.2 Number of Tips 2 Material HSS Lead Angle Right angle 25 °
- Fukuda Seiko (FKD) Submerged milling cutter with drill (for hexagon socket head bolt)Outer Diameter Tolerance (mm) 0～+0.2 Drill diameter tolerance (mm) 0～-0.05 Number of Tips 2 Material HSS Lead Angle Right angle 25 °
- STAR-M Iron plateBy removing the plate, the screw head fits neatly, resulting in a beautiful finish. The countersunk angle is 90 degrees. With a flat surface to set a drill stopper (sold separately). Cross-thinning is applied to the cutting edge to prevent slipping and facilitate positioning. Performs pilot drill... Read MoreDimensions SL (mm) 15 Shaft Length (mm) 30 Appropriate number of revolutions (rev / min) 3000 or less Width Across Flats (mm) 6.35 Overall Length (mm) 87 Material High speed steel Suitable Material Iron, aluminum, wood
- Fukuda Seiko (FKD) Submerged milling for extrusion pinsMaterial HSS-Co(SKH56)from S$58.99Min. 2 days
- THECUT Submerged milling machine with drill for countersunk screwBy adopting TiALN (titanium alumina) coating, the life is greatly extended. By adopting a triangular shank, work efficiency with both drill chuck and collet chuck is greatly improved.Tip Angle (°) 118 Material Heiss Surface Treatment V1 (TiAlN coating)from S$44.99Min. 2 days
- BIG DAISHOWA Center Boy 90 Celsius DegreeAccurate positioning and chamfering of drill holes can be done at the same time. Excellent sharpness by adopting high precision throw away bit. Since the cutting edge can be replaced, stable performance is always exhibited without the need for re-polishing. Long shank type with little work interf... Read MoreNumber of Tips 2 Included Accessories 2 throwaway bits RoHS directive (corresponding to 10 substances) Correspondence Material Heiss Abrasive Materials Steel, cast iron, aluminum Surface Treatment TiN coatfrom S$159.90Min. 2 days
-
- Fukuda Seiko (FKD) Long shank sunk millingA counterbore cutter for sinking the head of a hexagon socket head cap screw. Maintains high economic efficiency with abundant number of re-polishing. Since it is a long shank standard, it can be used for deep machining. Work Material: Carbon Steel, Alloy Steel, Tool Steel, Cast Iron, Non-Ferrous... Read MoreSpecification For hexagon socket head cap screw Material High speed steel (SKH56)
- THECUT Submerged milling cutter with drill for cap boltBy adopting TiALN (titanium alumina) coating, the life is greatly extended. By adopting a triangular shank, work efficiency with both drill chuck and collet chuck is greatly improved.Tip Angle (°) 135 Material Heiss Surface Treatment V1 (TiAlN coating)from S$46.99Min. 4 days
- Kumeda Ironware CountersinkA countersunk cone is a drilling machine in which pilot holes such as screws and countersunk processing for embedding are performed at the same time. Since it is a combination of a drill for countersunk processing (M type) and a medium drill for drilling pilot holes (A type), only the worn one ca... Read MoreShank Diameter (Φmm) 6.35from S$55.99Min. 2 days
- Fukuda Seiko (FKD) Staggered T slot cutterIdeal for grooving and milling.Blade Thickness Tolerance (mm) 0～+0.1 Helix Angle (°) 15 Material HSS-Cofrom S$86.99Min. 4 days
-
-
- Fukuda Seiko (FKD) T-slot end millT-slot end mill for aluminum processing. Since the blade groove is deep for a twist angle of 30 °, chips can be discharged smoothly. Cutting capacity is greatly improved compared to conventional T-slot cutters! Finished surface (surface accuracy) is significantly improved by eccentric blade attac... Read MoreOuter Diameter Tolerance (mm) 0～+0.05 Blade Thickness Tolerance (mm) 0～+0.1 Number of Tips 5 Material HSS-Co Lead Angle Right twist 30 °from S$139.90Min. 5 days
- Fukuda Seiko (FKD) Double Angle Cutter with HandleA milling cutter used for V-grooves, etc.Outer Diameter Tolerance (mm) 0～+1 Material HSS Angle Tolerance ±15'
- Fukuda Seiko (FKD) T slot cutterBlade Thickness Tolerance (mm) 0～+0.1 Neck Length l1 (mm) 24 Material HSSfrom S$139.90Min. 5 days
- STAR-M Ironsmith's dish drill inner coneBy removing the plate, the screw head fits neatly, resulting in a beautiful finish. The countersunk angle is 90 degrees. With a flat surface to set a drill stopper (sold separately). Cross-thinning is applied to the cutting edge to prevent slipping and facilitate positioning. Performs pilot drill... Read Morefrom S$6.39Min. 2 days
- BIG DAISHOWA Cutter boySince it is a throw-away method, there is no need for re-polishing. Carbide tip that can be used at 3 corners has a long life and is economical. Since it is a carbide guide system, stable cutting can be performed and it can be used from a tabletop drilling machine. * If you order by cash on deliv... Read MoreProcessing Diameter (mm) (Maximum) 25 Pilot Hole Diameter (Φmm) (Minimum) 5 Number of Tips 1 Shank Diameter (mm) 12 Mass (g) 200 Blade Diameter (mm) 27 Trusco Part No. 306-1124 Underneck Length (mm) 38 Shank length (mm) 45 Overall Length L (mm) 83 Material Carbide RoHS directive (corresponding to 10 substances) Correspondencefrom S$249.90Min. 5 days
-
- NOGA T60 Scraper BladesMass (g) 10 Trusco Part No. 447-0419 Blade Angle (°) 60 Material Heiss Suitable Holder TN holder (EL0608)from S$27.99Min. 2 days
- WATERMILLS WM5% HssCo steel step drillSurface Treatment AlTiCN coating Material Cobalt heissfrom S$46.99Min. 6 days
- GREAT TOOL Drill blade setBecause it is a short type, there is little core blur and it is hard to break. Excellent sharpness due to the tapered shape and double groove. Pilot holes for wood and synthetic resin * Check the contents of the set before use to check for any abnormalities such as deformation or cracks. Do not w... Read MoreDimension (mm) 30, deep hole processing: 40 Width Across Flats (mm) 6.35 Proper rotation speed (min -1 ) 600～1300 Overall Length (mm) 92 Suitable Material General wood Axis Hex axisfrom S$13.99Min. 5 days
- GREAT TOOL Prickly cutterDurability is improved with titanium coating. Please use for drilling inclined holes, stop holes, and wood. It is possible to drill holes to a depth of approximately 40 mm. For cutting wood * This product is for woodworking. It is not possible to drill holes in metal. Check the bit for any abnorm... Read MoreWidth Across Flats (mm) 6.35 Proper rotation speed (min -1 ) 600～1300 Overall Length (mm) 92 Suitable Material General wood Axis Hex axisfrom S$11.99Min. 5 days
- GREAT TOOL Drill blade setTitanium coating finish makes it three times longer lasting. The cross-thinning process makes it easy to bite and make holes smoothly. For drilling holes in ironwork, wood, light metals, and synthetic resins * Before use, check for any abnormalities such as deformation or cracks before use.Dimension (mm) 15, deep hole processing: 40 Width Across Flats (mm) 6.35 Proper rotation speed (min -1 ) 600～1300 Overall Length (mm) 92 Suitable Material General wood Axis Hex axisfrom S$8.79Min. 5 days
- Kumeda Hexagon shank plate cone for ironworkThe hexagonal shank countersunk drill is a drill that can simultaneously perform pilot holes such as screws and countersunk processing for embedding. Since the outer drill (M type) for countersunk processing and the hexagonal shank middle drill (A type) for drilling pilot holes are combined, only... Read MoreShank Diameter (Φmm) 6.35from S$67.99Min. 3 days
- GREAT TOOL Drill blade setSince it is a middle type, there is little core deviation and it is hard to break, and accurate drilling work is possible. Three sharp tips (3 mm or more) reduce cutting resistance and enable clean drilling. (Compared to the manufacturer) Drilling holes for stainless steel, difficult steel materi... Read MoreDimension (mm) 25, deep hole processing: 40 Width Across Flats (mm) 6.35 Proper rotation speed (min -1 ) 600～1300 Overall Length (mm) 92 Suitable Material General wood Axis Hex axisfrom S$11.99Min. 5 days
- GREAT TOOL Drill blade setThe cross-thinning process makes it easy to bite and make holes smoothly. Ironwork, wood, light metal, synthetic resin * Before use, check for any abnormalities such as deformation or cracks before use.Dimension (mm) 10, deep hole processing: 40 Width Across Flats (mm) 6.35 Proper rotation speed (min -1 ) 600～1300 Overall Length (mm) 92 Suitable Material General wood Axis Hex axisfrom S$8.19Min. 5 days
- NOGA Triangular scraperIncluded Accessories Holder TN holder EL0608, blade BT6001 Mass (g) 83 Handle NG3000 Trusco Part No. 447-0435from S$56.99Min. 3 days
- GREAT TOOL Drill blade setSince it is a middle type, there is little core deviation and it is hard to break, and accurate drilling is possible. Three sharp tips (3 mm or more) reduce cutting resistance and enable clean drilling. (Compared to the manufacturer) Ironwork, wood, light metal, synthetic resin * Before use, chec... Read MoreDimension (mm) 20, deep hole processing: 40 Width Across Flats (mm) 6.35 Proper rotation speed (min -1 ) 600～1300 Overall Length (mm) 92 Suitable Material General wood Axis Hex axisfrom S$9.59Min. 5 days
-
Filter by categories
