PRICE DOWN
Toggle Nav
My Cart
Search
Advanced Search
All Category
All Category
Menu
Account

Coolant Systems

Coolant supplies are tools used to cool down the high heat generated by work such as metalworking. A typical example is a coolant hose for supplying coolant (cooling water). Coolant hoses can be used not only for cooling the heat generated by metalworking, but also for a wide range of applications such as lubrication and water supply. Many coolant supplies suitable for machining work have excellent oil and chemical resistance performance.

Other Related Pages

  1. a type cutting nozzle
  2. 1 8 npt set screw
  3. spray cap
  4. 2 metre hose
  5. pipe line choke
  6. g 1 2 thread to npt
  7. electrolux water inlet hose
  8. inline brake cable adjuster
  9. electrolux washing machine water inlet hose
View : Grid List
Filter

Items 1 - 40 of 991

Page
Set Ascending Direction
  1. Flexible joint hose
    KAKUDAI MFG Flexible joint hose
    You can easily connect and disconnect the joints one by one and freely adjust the disconnection length.
    Material  POM 
    Rating:
    70%
    (2)
    from S$43.99
    Min. 2 days
  2. Magnet for cutting fluid lubrication for air jet
    TRUSCO Magnet for cutting fluid lubrication for air jet
    320N super strong on / off small magnet. The bottom surface is V-shaped (150 °) and can be attached not only to flat surfaces but also to cylindrical surfaces. Equipped with 3 screw holes NPT1 / 4. Can also be used for refueling cutting fluid. 32kgf super strong on / off small magnet. Easy to set... Read More
    Trusco Part No.  227-5139  Mass (g)  270  Attracting Force (N)  320  Outer Dimensions (mm)  39×48×64  Connector Diameter  RC1/4 
    from S$76.99
    Min. 2 days
  3. Magnet coolant (no nozzle)
    TRUSCO Magnet coolant (no nozzle)
    Paint Inlet  G1/4  Valve Diameter (inch)  G1/4 
    from S$159.90
    Min. 32 days
  4. Coolant Liner (2 Hose Set)
    TRUSCO Coolant Liner (2 Hose Set)
    Polyacetal resin is used as the material, and it has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. It also features a wide operating temperature range of -30 ° C to + 80 ° C. * Joint pliers are required to attach / detach the co... Read More
    Rating:
    100%
    (5)
    from S$24.99
    Min. 2 days
  5. Coolant Liner (Flare Nozzle)
    TRUSCO Coolant Liner (Flare Nozzle)
    Polyacetal resin is used as the material, and it has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. It also features a wide operating temperature range of -30 ° C to + 80 ° C. * Joint pliers are required to attach / detach the co... Read More
    Rating:
    75%
    (4)
    from S$8.19
    Min. 2 days
  6. Coolant liner (connector)
    TRUSCO Coolant liner (connector)
    Material  Polyacetal 
    Rating:
    80%
    (2)
    from S$5.29
    Min. 2 days
  7. 1/4 ”lock line hose kit
    LOC-LINE 1/4 ”lock line hose kit
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/4 system 
    Rating:
    93%
    (3)
    from S$21.99
    Min. 2 days
  8. 1/4 ”lock line hose 10 elements (146mm)
    LOC-LINE 1/4 ”lock line hose 10 elements (146mm)
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/4 system 
    from S$15.99
    Min. 2 days
  9. Coolant liner (1/4 swivel nozzle)
    TRUSCO Coolant liner (1/4 swivel nozzle)
    It can be removed. Since it moves, the orientation can be adjusted. Polyacetal resin is used as the material, and it has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. It also features a wide operating temperature range of -30 ° ... Read More
    Dimension D (mm)  5.0  Size  1/4  Nozzle Width (mm)  41  Dimension W (mm)  46.0  Dimension H (mm)  12.0  Dimension h (mm)  41.0  Dimension H (Φmm)  16.0  Material  Polyacetal 
    Rating:
    40%
    (2)
    from S$18.99
    Min. 2 days
  10. Coolant liner (Y-type fitting)
    TRUSCO Coolant liner (Y-type fitting)
    Made of polyacetal resin, it has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. It also features a wide operating temperature range of -30 ° C to + 80 ° C. * The usable outside air temperature is approximately 70 ° C or less. Joi... Read More
    Material  Polyacetal resin  Operating Temperature Range (℃)  -30～80 
    Rating:
    100%
    (2)
    from S$8.69
    Min. 2 days
  11. 1/4 ”assembly pliers
    LOC-LINE 1/4 ”assembly pliers
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Specification  Lock line system: 1/4 system  Material  Acetal resin 
    Rating:
    100%
    (1)
    from S$29.99
    Min. 2 days
  12. Coolant liner hose kit
    TRUSCO Coolant liner hose kit
    Polyacetal resin is used as the material, and it has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. It also features a wide operating temperature range of -30 ° C to + 80 ° C. By combining each part, you can assemble a nozzle tha... Read More
    Rating:
    70%
    (4)
    from S$33.99
    Min. 2 days
  13. Coolant liner (round nozzle)
    TRUSCO Coolant liner (round nozzle)
    Polyacetal resin is used as the material, and it has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. It also features a wide operating temperature range of -30 ° C to + 80 ° C. * Joint pliers are required to attach / detach the co... Read More
    Material  Polyacetal 
    Rating:
    80%
    (2)
    from S$5.29
    Min. 2 days
  14. Cool dumbo
    FUSO SEIKI Cool dumbo
    Flexible. Made of double-walled pressure-resistant snake tube with a special structure, the injection direction does not fluctuate even with an airline pressure of 0.7MPa (7kgf / cm 2). The flow rate can be adjusted. You can freely adjust the strength by turning the cap at the tip of the nozzle.
    Air Pressure (MPa)  0.4(4kgf/cm2)  Air Discharge Rate (L/min)  170  Connector Diameter  G1 / 4 (PF) male screw  Base Dimensions (mm)  Φ70×27.5 
    Rating:
    100%
    (1)
    from S$149.90
    Min. 2 days
  15. Nogacool
    NOGA Nogacool
    As it is a small magnet, it is easy to set. * As a general rule, it is for cutting oil.
    Included Accessories  One tip nozzle (1/4, 1/8, 1/16) each  Maximum Operating Temperature (℃)  80  Flow Rate (L/h)  940 
    Rating:
    73%
    (9)
    from S$129.90
    Min. 2 days
  16. 1/4 ”lockline hose 1.52m (5 feet) coil
    LOC-LINE 1/4 ”lockline hose 1.52m (5 feet) coil
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/4 system 
    from S$75.99
    Min. 2 days
  17. Coolant Liner (Valve Male Thread Type)
    TRUSCO Coolant Liner (Valve Male Thread Type)
    Polyacetal resin is used as the material, and it has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. It also features a wide operating temperature range of -30 ° C to + 80 ° C. * Joint pliers are required to attach / detach the co... Read More
    Material  Polyacetal 
    Rating:
    80%
    (2)
    from S$16.99
    Min. 2 days
  18. 1/2 ”lock line hose 6 elements (140mm)
    LOC-LINE 1/2 ”lock line hose 6 elements (140mm)
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/2 system 
    from S$18.99
    Min. 2 days
  19. Coolant liner (connection valve)
    TRUSCO Coolant liner (connection valve)
    Material  Polyacetal 
    Rating:
    100%
    (2)
    from S$16.99
    Min. 2 days
  20. 1/2 ”lock line hose kit
    LOC-LINE 1/2 ”lock line hose kit
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Specification  Lock line system: 1/2 system  Material  Acetal resin 
    Rating:
    80%
    (1)
    from S$22.99
    Min. 2 days
  21. 1/4 ”in-line valve
    LOC-LINE 1/4 ”in-line valve
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/4 system 
    from S$26.99
    Min. 2 days
  22. Dumbo Nozzle R Type
    FUSO SEIKI Dumbo Nozzle R Type
    You can freely adjust the strength by turning the cap at the tip. Uses a double-walled pressure-resistant serpentine tube. It does not get wet even at a pressure of 0.7MPa (7kgf / cm 2) and does not shake. The flat blow dumbo nozzle is flat. As an air gun (air cooling, blow-off, drainage, etc.) A... Read More
    Air Pressure (MPa)  0.4(4kgf/cm2)  Nozzle Outer Diameter (Φmm)  11  Nozzle Inner Diameter (Φmm)  3  Type  For both air and liquid  Spraying Pattern  Maruki pattern 
    Rating:
    80%
    (1)
    from S$66.99
    Min. 2 days
  23. 1/2 ”assembly pliers
    LOC-LINE 1/2 ”assembly pliers
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/2 system 
    Rating:
    60%
    (1)
    from S$29.99
    Min. 2 days
  24. Coolant system (hose kit)
    Nikki Coolant system (hose kit)
    The joints are tightly fitted and the posture holding ability is high. It has excellent chemical resistance, heat resistance, and impact resistance.
    Material  Acetal resin 
    from S$22.99
    Min. 2 days
  25. 1/4 ”BSPT connector (1/4” system)
    LOC-LINE 1/4 ”BSPT connector (1/4” system)
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/4 system 
    from S$10.99
    Min. 2 days
  26. 1/4 ”Y fitting
    LOC-LINE 1/4 ”Y fitting
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/4 system 
    from S$15.99
    Min. 2 days
  27. 1/4 ”NPT connector (1/4” system)
    LOC-LINE 1/4 ”NPT connector (1/4” system)
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/4 system 
    from S$10.99
    Min. 2 days
  28. Plastic coolant hose 300, nozzle, valve
    PROCHI Plastic coolant hose 300, nozzle, valve
    Size  1/4”  Hose Length (mm)  (Coolant) 300 
    Rating:
    60%
    (1)
    from S$49.99
    Min. 2 days
  29. Air Jet (Cooling Device Body)
    TRUSCO Air Jet (Cooling Device Body)
    Operating Pressure (MPa)  0.2～0.5  Trusco Part No.  220-4029  Mass (g)  78  Suitable Fluid  Air  Connector Diameter  R1/4(PT1/4)  Specification  With nipple 
    Rating:
    80%
    (1)
    from S$179.90
    Min. 2 days
  30. Coolant liner (joint pliers)
    TRUSCO Coolant liner (joint pliers)
    Coolant liner connection
    Material  Aluminum die-cast  Dimension H (mm)  70  Dimension W (mm)  210  Overall Length (mm)  210  Dimension h (mm)  25.0 
    Rating:
    71%
    (7)
    from S$119.90
    Min. 2 days
  31. 1/4 ”round nozzle (1/4” system)
    LOC-LINE 1/4 ”round nozzle (1/4” system)
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Nozzle Diameter  1/4  Material  Acetal resin  Specification  Lock line system: 1/4 system 
    from S$10.99
    Min. 2 days
  32. Silencer for air jet
    TRUSCO Silencer for air jet
    Volume reduction is 30db or more. Due to the low resistance, the decrease in exhaust speed is negligible. Uses flame-retardant resin.
    Mass (g)  15  Trusco Part No.  279-5671  Effective Section Area (mm2)  30  Opening Diameter  R3/8 
    Rating:
    100%
    (2)
    from S$14.99
    Min. 2 days
  33. 1/4 ”swivel nozzle 40 (1/4” system)
    LOC-LINE 1/4 ”swivel nozzle 40 (1/4” system)
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/4 system 
    from S$22.99
    Min. 2 days
  34. 1 ”flare nozzle (1/4” system)
    LOC-LINE 1 ”flare nozzle (1/4” system)
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/4 system 
    from S$15.99
    Min. 2 days
  35. Air Jet Single Nozzle Set
    TRUSCO Air Jet Single Nozzle Set
    A cooling method that does not use cutting fluid. Cooling air is up to 31 ° C lower than the outside air. Since no machine is used, there are no failures and maintenance is easy. A cooling device for dry processing that applies the "vortex theory". For cooling the cutting edge and cooli... Read More
    Operating Pressure (MPa)  0.2～0.5  Discharge Port  1/8  Air Consumption (L/min)  190～440  Trusco Part No.  220-3669  Mass (g)  450  Suitable Fluid  Air  Compressed Air Connection  R1/4(PT1/4)  Included Accessories  hose nipple 
    from S$279.90
    Min. 2 days
  36. 1/8 ”round nozzle (1/4” system)
    LOC-LINE 1/8 ”round nozzle (1/4” system)
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Nozzle Diameter  1/8  Material  Acetal resin  Specification  Lock line system: 1/4 system 
    from S$10.99
    Min. 2 days
  37. Nozzle with Magnet for Cutting Fluid Lubrication
    TRUSCO Nozzle with Magnet for Cutting Fluid Lubrication
    With a strong magnet of 800N (80kgf), it can be easily installed in any position. You can freely decide the angle and direction of the nozzle. Since the additional screw hole Rc1 / 4 is drilled, two nozzles can be used. For refueling cutting fluid. Comes with two independent screw holes.
    Opening Diameter (Φmm)  Cutting fluid inlet / 13.5  Trusco Part No.  219-8592  Mass (kg)  1.4  Attracting Force (N)  800  Nozzle Length (mm)  320 
    from S$119.90
    Min. 2 days
  38. Foot-operated air valve
    FUSO SEIKI Foot-operated air valve
    You can switch the air on and off without using the power supply. For air operation according to the control and work of air equipment.
    Number of Ports  2  Mass (g)  900  Type  Foot-operated  Suitable Fluid  air 
    Rating:
    80%
    (1)
    from S$189.90
    Min. 2 days
  39. 1/2 ”lock line hose 1.52m coil
    LOC-LINE 1/2 ”lock line hose 1.52m coil
    A hose is created by combining a ball and a socket, and the hose is bent into a flexible shape by the frictional force to maintain the spraying direction while flowing the coolant, and each is applied to its own processing work.
    Material  Acetal resin  Specification  Lock line system: 1/2 system 
    from S$99.90
    Min. 2 days
  40. Tap Touch Parts Air Hose Φ4x2.5 Black
    FUSO SEIKI Tap Touch Parts Air Hose Φ4x2.5 Black
    Trusco Part No.  810-5697  Inner Diameter (Φmm)  2.5  Length (m)  1  Outer Diameter (Φmm)  4 
    Rating:
    60%
    (1)
    from S$1.89
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 991

Page
Set Ascending Direction