All Category

Spiral Taps

View : Grid List
Filter

Items 1 - 40 of 445

Set Ascending Direction
  1. Spiral Tap Hex Shank
    MonotaRO Spiral Tap Hex Shank
    It can be attached to an electric drill with a forward / reverse switching function, and screw holes can be easily machined. The spiral shape allows chips to be discharged upward, making it suitable for blind hole drilling. For threading blind holes. * Do not use for any purpose other than its in... Read More
    Hex Width Across (mm)  6.35  Type of Thread 
    Rating:
    84%
    from S$9.79
    Min. 2 days
  2. Spiral Tap Steam Treating
    MonotaRO Spiral Tap Steam Treating
    Ideal for female thread machining of blind holes. Since it is homotreated, it is difficult to weld and achieves a long life. For general mild steel * Be sure to wear protective equipment when using as there is a risk of injury. * Do not use for any purpose other than its intended purpose.
    Chamfer  2.0~3.0P  Number of Flutes  Spiral groove angle (°)  40  Shape  Below M6 is the protrusion center.  Finish Processing  For blind holes  Material  High speed tool steel (HSS-E)  Surface Treatment  Homo processing  Accuracy Grade  JIS Class 2 equivalent  Type of Female Thread  Metric screw 
    Rating:
    96%
    from S$7.99
    Min. 2 days
  3. CoroTap 300 (Spiral) TiCN Coating Helix Angle 40° EX0DMJ
    SANDVIK CoroTap 300 (Spiral) TiCN Coating Helix Angle 40° EX0DMJ
    * If you order by cash on delivery, it may be shipped the next day or later.
    Accuracy  6H  Material  High speed steel (HSS-E)  Processing screw  Metric screw  Surface Treatment  TiCN coating 
    from S$39.99
    Min. 5 days
  4. Spiral Tap for General Use (Metric Thread) EX-SFT
    OSG Spiral Tap for General Use (Metric Thread) EX-SFT
    Used for blind holes, it is suitable for work materials in which chips are continuously coiled in carbon steel, alloy steel and non-ferrous metals. Medium carbon steel (C0.25% -0.45%): ○, Alloy steel: ○, Ductile cast iron: ○, Copper: ○, Brass: ○, Brass casting: ○, Bronze: ○, Rolled aluminum mater... Read More
    Material  High vanadium high speed steel_HSS-E  Type of Thread  Surface Treatment  Non-coated 
    Rating:
    81%
    from S$12.99
    Min. 2 days
  5. Plus Series Spiral Tap +SP
    YAMAWA Plus Series Spiral Tap +SP
    The spiral tap has good machinability because it removes chips toward you. Usually used for blind holes. * If you order by cash on delivery, it may be shipped the next day or later.
    Rating:
    90%
    from S$9.69
    Min. 2 days
  6. Spiral Tap for Stainless Steel
    TPT Spiral Tap for Stainless Steel
    Spiral taps for stainless steel are suitable for sticky materials such as stainless steel and molybdenum steel.
    Number of Flutes  Material  High speed tool steel (HSS-E)  Surface Treatment  Homo processing  Type of Thread  Shape  M3 to M6 are protruding centers. 
    Rating:
    83%
    from S$8.39
    Min. 2 days
  7. Hex Shank Spiral Tap HEX-SFT
    Hayasaka Mfg. Hex Shank Spiral Tap HEX-SFT
    Uses HSS steel with excellent wear resistance It can be attached to models with forward and reverse rotation such as impact drivers, and screw holes can be easily machined. Chips are discharged upward by the spiral groove. (Compatible with class screws) Thread formation / correction of crushed th... Read More
    Screw Length (mm)  Shank Diameter (mm)  6.35  Overall Length (mm)  70  Material  High Speed _HSS  Abrasive Materials  Iron, aluminum, brass  Type of Thread  Surface Treatment  Non-coated 
    Rating:
    91%
    from S$46.99
    Min. 2 days
  8. Spiral tap for stainless steel (for metric threads) EX-SUS-SFT
    OSG Spiral tap for stainless steel (for metric threads) EX-SUS-SFT
    Suitable for blind hole stainless steel, copper and thermoplastics. Stainless steel: ◎, copper: ◎, thermoplastic: ◎ * The accuracy column is the recommended tap accuracy for class 2 female threads. * Before production in July 2002, M3 and below are protruding centers. * Tap accuracy does not guar... Read More
    Material  High vanadium highs HSSE  Surface Treatment  Homo processing  Type of Thread 
    Rating:
    71%
    from S$12.99
    Min. 2 days
  9. Spiral Tap Long Shank
    MonotaRO Spiral Tap Long Shank
    Ideal for female thread machining of blind holes when the protruding length of the threaded part is insufficient. * Be sure to wear protective equipment when using as there is a risk of injury. * Do not use for any purpose other than its intended purpose.
    Chamfer  2.0~3.0P  Number of Flutes  Spiral groove angle (°)  40  Material  High speed tool steel (HSS-E)  Accuracy Grade  JIS Class 2 equivalent  Type of Female Thread  Metric screw 
    Rating:
    91%
    from S$16.99
    Min. 2 days
  10. Hexagonal Axis Spiral Tap (For Through Holes and Blind Holes) (Witt Standard) No.28-S
    Onishi Mfg. Hexagonal Axis Spiral Tap (For Through Holes and Blind Holes) (Witt Standard) No.28-S
    Uses HSS steel with excellent wear resistance. It can be attached to models with forward and reverse rotation such as impact drivers, and screw holes can be easily machined. The spiral groove discharges chips upward. For thread formation and correction of crushed threads * Cannot be used for powe... Read More
    Shank Diameter (mm)  6.35  RoHS directive (corresponding to 10 substances)  Correspondence  Material  High Speed _HSS  Presence/absence of protruding center  Included  Surface Treatment  Non-coated 
    from S$33.99
    Min. 2 days
  11. Spiral tap (HSS-E) (for metric threads)
    TRUSCO Spiral tap (HSS-E) (for metric threads)
    Spiral tap for general steel. For blind hole machining. Work Material: General Steel, Low / Medium Carbon Steel, Alloy Steel.
    Material  High vanadium high speed steel_HSS-E  Surface Treatment  Homo processing  Accuracy  JIS Class 2 
    Rating:
    100%
    from S$10.99
    Min. 2 days
  12. Spiral tap (for metric threads)
    Ishihashi Seiko Spiral tap (for metric threads)
    Spiral taps are used for blind holes and chips curl up. Ishihashi's spiral has a unique design for twisted angle groove shape, cutting edge, clearance angle (chanfer), etc., and the chip torque is particularly light (about 1/2 of the hand tap), and the threaded part further enhances wear resi... Read More
    Type of Thread 
    Rating:
    83%
    from S$14.99
    Min. 2 days
  13. Hexagonal spiral tap
    LIGHT SEIKI Hexagonal spiral tap
    Threads can be easily set with an electric impact driver. Uses high quality HSS material.
    Material  HSS 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  14. Hand tap for taper threads for American pipes, short screw type S-NPT
    YAMAWA Hand tap for taper threads for American pipes, short screw type S-NPT
    It has good chip evacuation, shear cut and machinability, and is especially suitable for blind hole screwing of sticky materials. For blind hole machining. Work material: Medium carbon steel.
    from S$68.99
    Min. 5 days
  15. Spiral tap with hexagonal shaft drill
    Hayasaka Mfg. Spiral tap with hexagonal shaft drill
    You can drill pilot holes and thread at the same time with one. 6.35mm hexagonal shaft finish for impact drivers. The drill tip has an X-shaped thinning process that makes it easy to bite and has excellent sharpness. For thread formation * Cannot be used for power tools other than those with forw... Read More
    Hex Width Across (mm)  6.35  Material  High speed tool steel (HSS)  Type of Thread 
    Rating:
    88%
    from S$39.99
    Min. 2 days
  16. I Series Spiral Tap ISP
    YAMAWA I Series Spiral Tap ISP
    Material  High Speed _HSS  Processing screw  Metric screw  Surface Treatment  Oxidation treatment (OX) 
    Rating:
    98%
    from S$7.59
    Min. 2 days
  17. Spiral Tap for Stainless SU+SP
    YAMAWA Spiral Tap for Stainless SU+SP
    Spiral taps for stainless steel are suitable for extremely sticky materials such as stainless steel, chrome steel and molybdenum steel. Usually used for blind holes. Suitable for chrome steel and molybdenum steel, including stainless steel, which is a material that is extremely work-hardened and ... Read More
    Rating:
    93%
    from S$12.99
    Min. 2 days
  18. Spiral tap for through hole for stainless steel SU+SL
    YAMAWA Spiral tap for through hole for stainless steel SU+SL
    Machining in the medium speed range of 10m / min to 20m / min is possible. (Full synchronous feed is recommended for 15m / min and above) Achieves a long tool life in medium-speed machining, and the finished surface of the female thread flank after 2000 hole machining is good, and the female thre... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence  Finish Processing  For through holes  Material  High Speed _HSS  Presence/absence of protruding center  Included  Type of Thread  Surface Treatment  Oxidation treatment (OX)  Accuracy  P2 
    Rating:
    88%
    from S$11.99
    Min. 2 days
  19. Spiral Tap General Purpose Long Shank (For Metric Threads) EX-LT-SFT
    OSG Spiral Tap General Purpose Long Shank (For Metric Threads) EX-LT-SFT
    It is used when the protruding length of the threaded part is insufficient with the standard spiral tap. Medium carbon steel (C0.25% to C0.45%): ○, Alloy steel (SCM): ○, Doug tile cast iron (FCD): ○, Copper (Cu): ○, Brass (Bs): ○, Brass casting ( BsC): ○, Bronze (PB): ○, Rolled aluminum material ... Read More
    Chamfer  2.5P  Helix Angle (°)  35  Material  High vanadium high speed steel_HSS-E  Type of Thread  Surface Treatment  Non-coated 
    Rating:
    93%
    from S$24.99
    Min. 2 days
  20. Spiral Tap Short Chamfer Type EX-SC-SFT
    OSG Spiral Tap Short Chamfer Type EX-SC-SFT
    The bite length is 1.5 mountains. It is most suitable when the effective screw length cannot be secured with a blind hole with a bite length of 2.5 threads for general use spiral taps. Medium carbon steel (C0.25% -0.45%): ○, Rolled aluminum material: ○, Aluminum alloy casting: ○, Magnesium alloy ... Read More
    Chamfer  1.5P  Helix Angle (°)  45  Material  High vanadium high speed steel_HSS-E  Type of Thread  Surface Treatment  Non-coated 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  21. Spiral Tap A-SFT
    OSG Spiral Tap A-SFT
    A tap series that boasts high efficiency and multifunctional performance. A spiral tap with stable chip evacuation. Low carbon steel (C ~ 0.25%): ○, Medium carbon steel (C0.25% ~ 0.45%): ◎, High carbon steel (C0.45% ~): ◎, Alloy steel: ○, Heat-treated steel (25) ~ 35HRC): ◎, Stainless Steel (~ 35... Read More
    Helix Angle (°)  45  Type of Thread  Material  Powder HSS_CPM  Surface Treatment  V coating 
    Rating:
    93%
    from S$29.99
    Min. 2 days
  22. T spiral tap TSP
    TANOI MFG (TDT) T spiral tap TSP
    The twist angle of the groove is 43.5 °, which allows good chip evacuation, and the thrust force is adjusted by the special relief attached to the complete mountain following the bite part to prevent the female screw from expanding. The tap material is high vanadium high speed steel with abrasion... Read More
    Chamfer  2.5P  Chamfer Length Lc  2.5P  Material  High vanadium high speed steel_HSS-V  Surface Treatment  Homo processing  Type of Thread 
    Rating:
    80%
    from S$9.59
    Min. 2 days
  23. Spiral Tap Stainless Steel for Deep Holes SUS-DH-SFT
    OSG Spiral Tap Stainless Steel for Deep Holes SUS-DH-SFT
    Ideal for deep hole drilling of stainless steel over 2D. Stainless steel (SUS): ◎, Copper (Cu): ◎, Thermoplastic plastic: ◎ * The accuracy column is the recommended tap accuracy for class 2 female threads. * Tap accuracy does not guarantee female thread accuracy. * Please refer to the manufacture... Read More
    Chamfer  2.5P  Helix Angle (°)  45~49  Material  High vanadium high speed (HSSE)  Surface Treatment  Homo processing  Type of Thread  Accuracy Notation  STD 
    Rating:
    100%
    from S$15.99
    Min. 2 days
  24. Spiral Tap for Aluminum
    YAMAWA Spiral Tap for Aluminum
    It is a tap that eliminates chip biting and chip clogging when cutting aluminum die castings and aluminum castings, and eliminates female screw squeezing. * If you order by cash on delivery, it may be shipped the next day or later.
    Type of Thread  Tap Type  Spiral tap (right 45 °) 
    Rating:
    85%
    from S$18.99
    Min. 2 days
  25. Spiral Tap for Aluminum EX-AL-SFT
    OSG Spiral Tap for Aluminum EX-AL-SFT
    Ideal for threading blind holes in aluminum and its alloys, and non-ferrous metals such as die casting. Rolled aluminum material (AL): ◎, Aluminum alloy casting (AC / ADC): ◎, Magnesium alloy casting (MC): ○, Thermoplastic plastic: ○ * The accuracy column is the recommended tap accuracy for class... Read More
    Number of Flutes  Chamfer  2.5P  Helix Angle (°)  51  Material  High vanadium high speed steel_HSS-E  Type of Thread  Surface Treatment  Non-coated  Accuracy Notation  STD 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  26. Hexagonal Axis Spiral Tap Long Type (For Through Holes and Blind Holes) NO.28-L
    Onishi Mfg. Hexagonal Axis Spiral Tap Long Type (For Through Holes and Blind Holes) NO.28-L
    Overall Length (mm)  120  Shank Diameter (mm)  6.35  RoHS directive (corresponding to 10 substances)  Correspondence  Material  High Speed _HSS  Presence/absence of protruding center  Included  Processing screw  Metric screw  Surface Treatment  Non-coated 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  27. Spiral Tap TiN Coating TIN-SFT
    OSG Spiral Tap TiN Coating TIN-SFT
    Suitable for low / medium carbon steel and stainless steel that are tapped with a water-soluble cutting fluid for machining with a screwing length of 2D or less. Low carbon steel (C ~ 0.25%): ○, Medium carbon steel (C0.25% ~ 0.45%): ○, High carbon steel (C0.45% ~): ○, Alloy steel (SCM): ○, Temper... Read More
    Chamfer  2.5P  Material  High vanadium high speed (HSSE)  Type of Thread  Accuracy Notation  STD  Surface Treatment  TiN coating 
    Rating:
    60%
    from S$27.99
    Min. 2 days
  28. T Spiral Tap / For Stainless Steel TSP-SUS
    TANOI MFG (TDT) T Spiral Tap / For Stainless Steel TSP-SUS
    The twist angle of the groove is 43.5 °, which allows good chip discharge, and the shape emphasizes sharpness and allows heat to escape easily. The tap material is high vanadium and high cobalt high-speed steel containing heat-resistant cobalt, and can also be used for Ni-Cr steel and heat-resist... Read More
    Chamfer Length Lc  2.5P  Chamfer  2.5P  Number of Flutes  Material  High vanadium high speed steel_HSS-E  Surface Treatment  Homo processing  Type of Thread 
    Rating:
    100%
    from S$11.99
    Min. 2 days
  29. Spiral tap (for unified screw)
    Ishihashi Seiko Spiral tap (for unified screw)
    Material  High speed steel (HSS-E) 
    Rating:
    60%
    from S$22.99
    Min. 2 days
  30. Spiral Tap CPM-SFT for Difficult-To-Machine Materials
    OSG Spiral Tap CPM-SFT for Difficult-To-Machine Materials
    It is ideal for casting high carbon steel, tool steel, alloy steel, or blind holes with a hardness of about 20 to 35 HRC for tempered materials. High carbon steel (C0.45% ~): ◎, Alloy steel: ○, Heat-treated steel (35-45HRC): ○, Tool steel: ○, Cast iron: ○, Ductile cast iron: ○, Aluminum alloy cas... Read More
    Chamfer  3P  Type of Thread  Material  Powder high speed (CPM)  Accuracy Notation  STD 
    Rating:
    83%
    from S$15.99
    Min. 2 days
  31. Camera Tripod Mounting Screw Tap TRP-SFT
    OSG Camera Tripod Mounting Screw Tap TRP-SFT
    Chamfer  1.5P  Material  High vanadium high speed steel_HSS-E  Surface Treatment  Non-coated  Presence/absence of protruding center  None  Type of Thread 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  32. Spiral Tap Long Shank for Stainless Steel EX-LT-SUS-SFT
    OSG Spiral Tap Long Shank for Stainless Steel EX-LT-SUS-SFT
    Chamfer  2.5P  Helix Angle (°)  45  Material  High vanadium high speed (HSSE)  Surface Treatment  Homo processing  Type of Thread  Accuracy Notation  STD 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  33. Spiral Fluted Taps for Tough Stainless Steels SU2-SP
    YAMAWA Spiral Fluted Taps for Tough Stainless Steels SU2-SP
    Dedicated to machines with a fully synchronized lead feed mechanism. Ideal for threading austenitic stainless steel (SUS316 / 304). For blind hole machining. Work material: Stainless steel. For fully synchronized lead feeders only. * Do not use this tap on a machine that is not equipped with a fu... Read More
    from S$13.99
    Min. 2 days
  34. Cobalt spiral tap (for metric threads)
    Ishihashi Seiko Cobalt spiral tap (for metric threads)
    Material  Cobalt high speed steel (HSCO)  Type of Thread 
    Rating:
    100%
    from S$19.99
    Min. 5 days
  35. Coated Spiral Tap AU+SP
    YAMAWA Coated Spiral Tap AU+SP
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    from S$22.99
    Min. 2 days
  36. Long Spiral Tap LS-SP
    YAMAWA Long Spiral Tap LS-SP
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Rating:
    100%
    from S$58.99
    Min. 6 days
  37. Short Spiral Tap for Deep Hole S-SP
    YAMAWA Short Spiral Tap for Deep Hole S-SP
    For blind holes * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    from S$11.99
    Min. 2 days
  38. Spiral Tap MS-DH-SFT for Mild Steel and Deep Holes
    OSG Spiral Tap MS-DH-SFT for Mild Steel and Deep Holes
    It is suitable for blind holes where tap damage due to chip clogging and galling of female screws are likely to occur. Low carbon steel (C to 0.25%): ◎, Medium carbon steel (C0.25% to 0.45%): ○, Alloy steel: ○, Cast steel: ◎, Thermoplastic plastic: ○
    Chamfer  2.5P  Helix Angle (°)  35~51  Material  High vanadium high speed (HSSE)  Surface Treatment  Homo processing  Accuracy Notation  STD 
    Rating:
    80%
    from S$11.99
    Min. 2 days
  39. Packed long spiral tap
    Ishihashi Seiko Packed long spiral tap
    Type of Thread 
    from S$39.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 445

Set Ascending Direction