Drill Taps
Other Related Pages
MonotaRO Hex axis drill tapSince the tip is drill-shaped, it is a convenient tool that can perform pilot hole drilling and thread cutting at the same time. For easy screw hole processing. * When using with an impact driver, please work carefully. * Cannot be used except with forward and reverse rotation. * Cannot be used f... Read MoreHex Width Across (mm) 6.35- RUKO Hex axis tapping drillIt has a hexagonal shaft shank and can be attached to a cordless screwdriver. You can perform pilot hole drilling work and thread cutting work for iron plates, etc. without replacing the drill. For drilling holes and forming / correcting threads. Work material: Iron, aluminum, copper. * Cannot be... Read MoreMaterial High speed steel (HSS) Accuracy 6H Suitable Model Charge rotation screwdriver Shank Diameter (Φmm) 6.35 (Hex axis)
- RUKO Hex axis tapping drill (TiN coating)It has a hexagonal shaft shank and can be attached to a cordless screwdriver. You can perform pilot hole drilling work and thread cutting work for iron plates, etc. without replacing the drill. For drilling holes and forming / correcting threads. Work material: Iron, aluminum, copper, stainless s... Read MoreAccuracy 6H Suitable Model Charge rotation screwdriver Surface Treatment TiN coating Material High speed tool steel (SKH) Shank Diameter (Φmm) 6.35 (Hex axis)
- Mitsutomo Hexagon Point Tap and Pilot Hole DrillTrusco Part No. 858-7860 Mass (g) 150.4from S$58.99Min. 2 days
- RUKO Hex axis tapping drillIt has a hexagonal shaft shank and can be attached to a cordless screwdriver. You can perform pilot hole drilling work and thread cutting work for iron plates, etc. without replacing the drill. For drilling and forming / correcting threads * Cannot be used with power tools other than those with f... Read MoreShank Diameter (Φmm) 6.35 (Hex axis) Accuracy 6H Suitable Model Charge rotation screwdriver Material High speed steel (HSS) Processing screw Metric screwfrom S$29.99Min. 2 days
- Onishi Mfg. Hex axis tapping drillWith a hexagonal shaft compatible with impact drills, pilot holes and thread cutting work can be performed at the same time. The thickness of the processed material is up to 3.0 mm. Formation and correction of threads in through holes. Work Material: Iron, Aluminum, Brass. * Cannot be used with p... Read MoreShank Diameter (mm) 6.35 (Hex axis) RoHS directive (corresponding to 10 substances) Correspondence Material High speed tool steel (HSS) Type of Thread M
- OSG Drill Tap DRTThe drill part at the tip is used to drill a pilot hole for the tap, and the tap part is used for continuous threading, which is effective in improving productivity. Dedicated for drilling through holes.Material High speed steel HSS
-
-
- Mitsutomo Hex axis guide tap with pilot hole drillMaterial Pilot hole drill: HSS, Tap: HSS
- Ishihashi Seiko Drilling TapA type with a drill at the tip, which performs screw pilot hole drilling and screwing drilling at the same time. In particular, both drills and taps have the same spiral groove and cutting edge to improve cutting performance and enable efficient machining. Homo processing is applied to the surfac... Read MoreMaterial High speed tool steel (HSS) Surface Treatment Homo processing Type of Thread M
- JEFCOM (DENSAN) Tap and drillThis one tap and drill is OK. Drilling, female threading, and simple deburring can be done in a series of operations. For drills with forward / reverse rotation mechanism. Compatible with impact drivers.Material HSS steel Suitable Material Soft iron, aluminum, plasticfrom S$69.99Min. 3 days
-
-
- H&H Hexagonal electric screw tapIt can be attached to the hexagonal shaft bit insertion part of the charging driver / impact driver with a single touch, and a clean female screw can be set up.Material SKS2from S$10.99Min. 3 days
- RUKO Hex axis tapping drill setIt has a hexagonal shaft shank and can be attached to a cordless screwdriver. You can perform pilot hole drilling work and thread cutting work for iron plates, etc. without replacing the drill. For drilling and forming / correcting threads * Cannot be used with power tools other than those with f... Read MoreMass (g) 280 Shank Diameter (Φmm) 6.35 (Hex axis) Accuracy 6H Suitable Model Charge rotation screwdriver Material High speed steel (HSS) Abrasive Materials Iron, aluminum, copper Processing screw Metric screwfrom S$249.90Min. 2 days
- RUKO Hexagon Tapping Drill Titanium SetIt has a hexagonal shaft shank and can be attached to a cordless screwdriver. You can perform pilot hole drilling work and thread cutting work for iron plates, etc. without replacing the drill. For drilling and forming / correcting threads * Cannot be used with power tools other than those with f... Read MoreMass (g) 280 Shank Diameter (Φmm) 6.35 (Hex axis) Accuracy 6H Suitable Model Charge rotation screwdriver Material High speed steel (HSS) Abrasive Materials Iron, aluminum, copper, stainless steel Processing screw Metric screwfrom S$399.90Min. 3 days
-
- ESCO M 8x1.25 / 6.2x51mm Drill Tap (Hex Axis / HSS)Esco Part No. EA829CB-8from S$39.99Min. 4 days
- Ishihashi Seiko Tap / Drill One PackType of Thread M Material High speed tool steel (HSS)from S$14.99Min. 2 days
- Ishihashi Seiko Drilling tapA type with a drill at the tip, which performs screw pilot hole drilling and screwing drilling at the same time. For drilling through holes. Work Material: Iron, Ferroalloy, Light Metal.Type of Thread (Processing screw) Metric screw Thread Number of Chamfer 2.5 Surface Treatment Homo processing Accuracy JIS Class 2from S$109.90Min. 3 days
-
- JEFCOM (DENSAN) Tap and drill (titanium coating)Titanium coating improves wear resistance and corrosion resistance (size: M5) This one tap and drill is OK. Drilling, female thread cutting, and simple deburring can be done in a series of operations.Cell Spacing (mm) 0.8 Mass (g) 10 Suitable Workpiece Thickness to Cut (mm) 5 or less Overall Length (mm) 57 Material HSS steel Thread Size M5 Suitable for Soft iron, aluminum, plasticfrom S$109.90Min. 4 days
- JEFCOM (DENSAN) Tap and drill (titanium coating)Titanium coating improves wear resistance and corrosion resistance (size: M4) This one tap and drill is OK. Drilling, female thread cutting, and simple deburring can be done in a series of operations.Cell Spacing (mm) 0.7 Overall Length (mm) 55 Mass (g) 9 Material HSS steel Thread Size M4 Suitable for Soft iron, aluminum, plastic Suitable Workpiece Thickness to Cut (mm) less than 4from S$109.90Min. 4 days
-
-
- U-needs Hex Axis Drill TapPilot holes and threads can be constructed in one shot. Holes can be drilled more easily than manual rotation work. Spiral grooves allow chip discharge in the upward direction. Use HSS steel with extremely excellent wear resistance. Can be used instantly for stainless steel materials Impact drive... Read MoreShank Diameter (Φmm) 6.35 (Hex axis) Material High speed tool steel (HSS) Surface Treatment Homo processingfrom S$33.99Min. 2 days
- ESCO M 3-M10 / 6 regular drill tap (hexagonal shaft / HSS)Esco Part No. EA829CBfrom S$239.90Min. 4 days
- JEFCOM (DENSAN) Tap and drill (titanium coating)Titanium coating improves wear resistance and corrosion resistance (size: M10) This one tap and drill is OK. Drilling, female thread cutting, and simple deburring can be done in a series of operations.Cell Spacing (mm) 1.5 Mass (g) 18 Overall Length (mm) 76 Material HSS steel Thread Size M10 Suitable for Soft iron, aluminum, plastic Suitable Workpiece Thickness to Cut (mm) less than 10from S$159.90Min. 4 days
- JEFCOM (DENSAN) Tap and drill (titanium coating)Titanium coating improves wear resistance and corrosion resistance (size: M3) This one tap and drill is OK. Drilling, female thread cutting, and simple deburring can be done in a series of operations.Cell Spacing (mm) 0.5 Suitable Workpiece Thickness to Cut (mm) 3 or less Overall Length (mm) 51 Mass (g) 8 Material HSS steel Thread Size M3 Suitable for Soft iron, aluminum, plasticfrom S$109.90Min. 4 days
- JEFCOM (DENSAN) Tap and drill (titanium coating)Titanium coating improves wear resistance and corrosion resistance (size: M6) This one tap and drill is OK. Drilling, female thread cutting, and simple deburring can be done in a series of operations.Cell Spacing (mm) 1 Mass (g) 10 Suitable Workpiece Thickness to Cut (mm) 6 or less Overall Length (mm) 60 Material HSS steel Thread Size M6 Suitable for Soft iron, aluminum, plasticfrom S$109.90Min. 4 days
-
- Trial Corporation Hex Axis Stainless Steel Drill TapPre-drilling work and tapping work combined! Free yourself from troublesome work with this one tool! 10-piece set only for M4, M5, and M6, which are most frequently used! Compatible with stainless steel! For thread processing on stainless steel, general steel, aluminum, brass, etc. *Be sure to us... Read MoreMaterial Cobalt high-speed steel Shank Diameter (Φmm) Hex axis 6.35 Set Contents M4/4/4/4/4/4/4/5/5/6from S$339.90Min. 5 days
- JEFCOM (DENSAN) Tap and drill (titanium coating)Titanium coating improves wear resistance and corrosion resistance (size: M8) This one tap and drill is OK. Drilling, female thread cutting, and simple deburring can be done in a series of operations.Cell Spacing (mm) 1.25 Mass (g) 14 Overall Length (mm) 69 Suitable Workpiece Thickness to Cut (mm) 8 or less Material HSS steel Thread Size M8 Suitable for Soft iron, aluminum, plasticfrom S$139.90Min. 4 days
-
- JEFCOM (DENSAN) Tap and drill (titanium coating)A set of 3 with titanium coating to improve wear resistance and corrosion resistance (sizes: M4, M5, M6). This one tap and drill is OK. Drilling, female thread cutting, and simple deburring can be done in a series of operations.Cell Spacing (mm) 0.7(M4)、0.8(M5)、1(M6) Overall Length (mm) 55(M4)、57(M5)、60(M6) Mass (g) 9(M4)、10(M5)、10(M6) Material HSS steel Thread Size M4, M5, M6 (set of 3) Suitable for Soft iron, aluminum, plasticfrom S$299.90Min. 4 days
- ESCO Drill tap (hexagonal axis / HSS)With hexagonal shaft bit holder Pilot holes, taps, and countersunk holes can be machined in one step.from S$169.90Min. 3 days
- MonotaRO Hex axis drill tapA convenient hexagonal shaft drill tap that allows tap piloting and threading at the same time. * When using with an impact driver, please work carefully. * Cannot be used for power tools other than those with forward and reverse rotation. * Cannot be used for stainless steel or heat-treated stee... Read MoreThickness that can be drilled (mm) 5 Hex Width Across (mm) 6.35 Maximum Operating Speed (min -1 [rpm]) 800 Material High speed tool steel (HSS)Discontinued
