Tap Wrenches / Die Wrenches
The handle is the tool used to turn the taps used to make female and male threads. The main body is made of zinc die cast, steel, ductile cast iron, etc. and has high strength and high durability. The one-character type handle can be turned with both hands, so it has high stability and excellent workability. The T-type ratchet type wrench is designed so that turning in one direction fixes the gear and turns the screw, but turning in the opposite direction causes the gear to come off and idle. You can work efficiently without having to change taps. This item is used at various sites that handle screws, such as construction sites, construction sites, and assembly work sites.
Other Related Pages
TRUSCO Tap HandleOne-character type handle for hand taps and hand reamers. Handle for tap stand * Please use the handle that matches the size of the hand tap. Be sure to use tapping oil when tapping. If you do not tighten it strongly with pliers, the tap will spin freely and your nails may be damaged. Please wear... Read MoreType For taps- SK (Niigata Seiki) Ratchet Tap HolderIt can be switched between right / left ratchet and fixed. It is an efficient ratchet type. For holding taps, forming female threads, and correcting crushing.Overall Width (mm) 100 Mass (g) 180 Thickness (mm) 20 Overall Length (mm) 85 Type For taps Tap range M3～M8
-
-
- TRUSCO Die HandleA one-character type handle for round dies. For die stand.Type For dice
- LIGHT SEIKI Ratchet Tap HolderA ratchet handle for Sarae dedicated to hand taps.Type For taps
- Ko-Ken (Yamashita Industrial Lab) Adjustable tap holderA tap holder that can hold square shanks of various sizes. Since it has a 9.5 mm insertion angle, it can be driven by the handles of a general-purpose socket wrench. For tap stand.Material Chrome molybdenum steel Type For taps
- SK (Niigata Seiki) Tap HandleIt is a general clamp type handle. For holding taps, forming female threads, and correcting crushing.Type For taps Material Steel
-
- Ko-Ken (Yamashita Industrial Lab) Tap holderA tap holder with a drive angle of 3/8 "(9.5 mm). The tap can be attached with a single touch and can be driven with the handle of a general-purpose socket wrench. For tap stand.Overall Length (mm) 40 Type For taps
- SUNFLAG (SHINKI MFG) SF Tap Wrench (Ratchet Shiki)It is easy to use just by repeating the repetitive movement while holding the main body. Eliminates inconsistencies when the tip grip claws fall off, are lost, or are engaged. Powerful ratchet mechanism.RoHS directive (corresponding to 10 substances) Correspondence Type For taps Suitable Tool Size M3～M10
-
- TRUSCO Iron Tap HandleOne-character type handle for hand taps and hand reamers. Since the main body is made of iron, it is stronger and stronger than zinc die-cast. For tap stand. * Please use the handle that matches the size of the hand tap. Be sure to use tapping oil when tapping.Material Ductile iron (FCD45) Type For taps
- SK (Niigata Seiki) Fixed Tap HolderIt can be worked with one hand and can be easily threaded even in narrow spaces. For holding taps, forming female threads, and correcting crushing.Type For taps
- SCHROEDER Ratchet Tap HolderAccurately machined spindles and hinge pins are resistant to breakage and bending and have high torque performance. Hardened flat springs and aluminum adjustment knobs allow for smooth switching. High quality spring steel stoppers maintain durability. The fuselage is made of high quality chrome p... Read MoreType For taps
- SK (Niigata Seiki) Dice handleIt is a general die handle. For holding dies, forming male threads, and correcting crushing.Type For dice Material Steel
- Ko-Ken (Yamashita Industrial Lab) Die HolderA socket for driving dies that conforms to the JIS B4451 standard. Since it has a drive angle, it can be driven by the handles of a general-purpose socket wrench. For die work.Material Chrome molybdenum steel RoHS directive (corresponding to 10 substances) Correspondence Type For dice
- TRUSCO T-shaped Tap HolderYou can work with one hand and tap easily even in a narrow space. For tap thread cutting work.Type For taps
- TRUSCO T Type Ratchet Tap HolderSince it is a ratchet type, tapping work (screw production) is quick. Ideal for tap thread cutting work.Type For taps
- Onishi Mfg. No.29 hexagonal axis die holderIt can be attached to models with forward and reverse rotation such as impact drivers, and bolts can be easily threaded and crushed threads can be easily corrected. Bolt thread For repairing crushed bolt threads * Cannot be used for power tools other than those with forward and reverse rotation.Mass (g) 100 Suitable Screw Diameter (M) (mm) 2～10 Trusco Part No. 361-7432 Processing length (mm) 40 RoHS directive (corresponding to 10 substances) Correspondence Specification For 25mm diameter round dies Type For dice
- Ishihashi Seiko Ratchet type T-type tap holderIt is a ratchet type and can be switched between forward and reverse rotation.Specification For tap stand Type For taps Material Steel Handle T handle
- H&H Ratchet tap holderYou can screw up with one hand even in a narrow place.Type For taps
- LIGHT SEIKI Tap handle average gradeMaterial Aluminum die-cast Type For taps
- Onishi Mfg. Hexagonal die holderIt can be attached to models with forward and reverse rotation such as impact drivers, and bolts can be easily threaded and crushed threads can be easily corrected. Threading bolts. (NO29-DH-38 is not possible) Fix the thread of the crushed bolt. Threading of bolts and thread correction of crushe... Read More2018 Trusco page 1 0424 RoHS directive (corresponding to 10 substances) Correspondence Type For dice Material Medium carbon steel (S45C)
- TRUSCO Dice handle (iron)A handle for round dies. The handle and frame are all made of iron, so they are stronger and stronger than those made of zinc die-cast. For die stand.Type For dice Material Iron (FCD45)
- TRUSCO 3/8 9. 5mm plug tap holderA tap holder with a drive angle of 3/8 inch (9.5 mm). The tap can be attached with one touch and can be driven with the handle of a general-purpose socket wrench. For tap stand.Dimension H (mm) 15 Overall Length (mm) 40 Square Drive (mm[inch]) 9.5[3/8] Material Chrome molybdenum steel Type For taps
-
- TRUSCO Replacement claw for T-type ratchet holderType For taps Material Powdered steel
-
-
- ENGINEER Ratchet DriveHigh precision x high strength! Tap handle with ratchet for hexagonal axis! By supporting the hexagonal shaft bit, it prevents the tip tool from loosening or falling during work. Quick change is also possible, and workability in hole drilling can be greatly improved. Aluminum A7075, which is also... Read MoreHandle Length (mm) 100 Mass (g) 105 Overall Length (mm) 81 Type For taps Suitable Size M3～M10 sitable bit size (mm) [Opposite side] 6.35from S$46.99Min. 2 days
- Ko-Ken (Yamashita Industrial Lab) Tap handleA tap handle with a drive angle of 3/8 (9.5 mm). The switching lever can be locked to rotate clockwise or counterclockwise. For tap stand.Overall Length (mm) 220 Square Drive (inch) 3/8 Trusco Part No. 387-9101 RoHS directive (corresponding to 10 substances) Correspondence Type For taps
- Ko-Ken (Yamashita Industrial Lab) Tap holder setA set of tap holder sockets that can be driven by a handle for a general-purpose socket wrench. For tap stand.Mass (kg) 1.05 Case Dimensions (mm) 240×100×32 Type For tapsfrom S$299.90Min. 2 days
- SK (Niigata Seiki) SK ratchet tap holderTrusco Part No. 817-7519 Type For tapsfrom S$87.99Min. 2 days
-
- SCHROEDER Ratchet tap holderOversized sizeOverall Length (mm) 117 Grasp width (mm) 9.0-12.5 Type For taps Suitable Tap Diameter M16-M20from S$249.90Min. 2 days
-
- Ishihashi Seiko T type tap holder for 1/4 (M3 ～ M6)For tap stand. Easy-to-use T-shaped tap handle. For threading tapsTrusco Part No. 508-3010 Overall Length (mm) 60 Mass (g) 82 Type For taps Material Steel Suitable for [Tap] M3 ~ M6from S$13.99Min. 2 days
- Ishihashi Seiko Dice handleIt is a handle for round dies and is used by hand.Type For dice Material Zinc die castingfrom S$22.99Min. 2 days
-
