All Category

Milling Inserts / Square

View : Grid List
Filter

Items 1 - 40 of 473

Set Ascending Direction
  1. Chip SDMA
    Sumitomo Electric Hard Metal Chip SDMA
    0.8  Angle θ (°)  15  Clearance Angle (°)  15  Dimension T (mm)  3.18  Dimension A (mm)  9.525  Socket Shape  Cylindrical hole  Shape  Square  Chip Breaker  Without breaker 
    from S$75.99
    Min. 4 days
  2. Chip for milling SDKN
    MonotaRO Chip for milling SDKN
    * Be sure to wear protective equipment when using as there is a risk of injury. * Do not use for any purpose other than its intended purpose.
    Inscribed Circle Diameter (Φmm)  12.7  Clearance Angle (°)  15  Thickness (mm)  3.18  Material  MNP40 (cermet)  Right or Left Hand  None  with or without Hole  None  Abrasive Materials  P (steel)  Shape  Square 90 °  Tolerance of Nose Position (mm)  ±0.013  Thickness Tolerance (mm)  ±0.025  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13 
    Rating:
    94%
    from S$48.99
    Min. 2 days
  3. Chip SDKN
    Sumitomo Electric Hard Metal Chip SDKN
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Rating:
    93%
    from S$59.99
    Min. 2 days
  4. Chip SEMT
    Mitsubishi Materials Chip SEMT
    Rating:
    100%
    from S$98.99
    Min. 2 days
  5. Chip SOMT
    Mitsubishi Materials Chip SOMT
    Inscribed Circle Diameter (Φmm)  12.7  Cutting Blade Length (mm)  12.7  Thickness (mm)  3.97  Chip Breaker  One side  Shape  Square 90 °  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$87.99
    Min. 2 days
  6. Tip SFKN
    Sumitomo Electric Hard Metal Tip SFKN
    from S$129.90
    Min. 2 days
  7. Chip SEEN
    Mitsubishi Materials Chip SEEN
    Socket Shape  Corner Radius (mm)  0.3  Cutting Blade Length (mm)  12.7  Clearance Angle (°)  20  Thickness (mm)  3.18  Chip Breaker  None  Shape  Square 90 ° 
    from S$99.90
    Min. 2 days
  8. Chip SEGT
    Mitsubishi Materials Chip SEGT
    Optimal grade for general machining and milling of cast iron for medium finishing of cast iron
    Cutting Blade Length (mm)  13.4  Dimension D1 (Φmm)  13.4  Corner Radius (mm)  2.2  Dimension F1 (mm)  2.2  Clearance Angle (°)  20  Trusco Part No.  205-7603  Dimension S1 (mm)  3.97  Thickness (mm)  3.97  Suitable for  Cutter: ASX445  Accuracy  Material  HTi10  Abrasive Materials  K (cast iron) / N (non-ferrous metal)  Chip Breaker  One side  Cutting Edge Shape  Sharp edge  Shape  Square 90 °  with or without Hole  Yes 
    Rating:
    80%
    from S$119.90
    Min. 2 days
  9. Chip SDKN
    KYOCERA Chip SDKN
    with or without Hole  None  Shape  Square  Socket Shape 
    Rating:
    100%
    from S$66.99
    Min. 2 days
  10. Chip SEEN
    Mitsubishi Materials Chip SEEN
    Socket Shape 
    from S$139.90
    Min. 2 days
  11. Chip SOMT
    Mitsubishi Materials Chip SOMT
    (Material) PVD coating that can extend the life under the same conditions as the cemented carbide grade. VP coat suitable for cast iron.
    Corner Radius (mm)  0.8  Inscribed Circle Diameter (Φmm)  12.7  Cutting Blade Length (mm)  12.7  Trusco Part No.  249-0501  Thickness (mm)  3.97  Chip Breaker  One side  Shape  Square 90 °  Material  VP15TF  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    Rating:
    100%
    from S$119.90
    Min. 2 days
  12. Chip SEER
    Mitsubishi Materials Chip SEER
    (Material) CVD coating with improved wear resistance and fracture resistance due to a special tough crystal structure. Work material: Steel / stainless steel
    Socket Shape  Corner Radius (mm)  0.3  Dimension Re (mm)  Dimension F1 (mm)  1.4  Dimension D1 (mm)  12.7  Cutting Blade Length (mm)  12.7  Trusco Part No.  155-9915  Clearance Angle (°)  20  Dimension S1 (mm)  3.18  Thickness (mm)  3.18  Material  F7030  Chip Breaker  One side  Abrasive Materials  P (steel) / M (stainless steel)  Shape  Square 90 ° 
    from S$139.90
    Min. 2 days
  13. Chip SPCH
    Sumitomo Electric Hard Metal Chip SPCH
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Clearance Angle (°)  11  Cutting Blade Length (mm)  15.875  Inscribed Circle Diameter (Φmm)  15.875  Thickness (mm)  4.76  Shape  90 ° square 
    from S$149.90
    Min. 2 days
  14. Chip SEEN
    Mitsubishi Materials Chip SEEN
    (Material) CVD coating with improved wear resistance and fracture resistance due to a special tough crystal structure. Work material: Steel / stainless steel
    Socket Shape  Corner Radius (mm)  0.3  Dimension Re (mm)  1.0  Dimension F1 (mm)  1.4  Cutting Blade Length (mm)  12.7  Dimension D1 (mm)  12.7  Trusco Part No.  155-9893  Clearance Angle (°)  20  Dimension S1 (mm)  3.18  Thickness (mm)  3.18  Material  F7030  Chip Breaker  None  Shape  Square 90 ° 
    from S$139.90
    Min. 2 days
  15. Chip SEKN
    SANDVIK Chip SEKN
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$189.90
    Min. 3 days
  16. Chip SEMT
    Mitsubishi Materials Chip SEMT
    from S$119.90
    Min. 4 days
  17. Chip SOMT
    Sumitomo Electric Hard Metal Chip SOMT
    Chip Breaker  One side  Clearance Angle (°)  Others  Shape  Square  with or without Hole  Yes 
    from S$86.99
    Min. 4 days
  18. Chip SPCH
    Sumitomo Electric Hard Metal Chip SPCH
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Clearance Angle (°)  11  Inscribed Circle Diameter (Φmm)  12.7  Cutting Blade Length (mm)  12.7  Thickness (mm)  3.18  Shape  90 ° square 
    from S$59.99
    Min. 3 days
  19. Chip SEKN
    KYOCERA Chip SEKN
    Dimension X (mm)  0.5  Dimension Z (mm)  1.4  Dimension A (mm)  12.7  Angle α (°)  20  Clearance Angle (°)  20  Angle β (°)  25  Dimension T (mm)  3.18  Angle γ (°)  45  with or without Hole  None  Shape  Square  Socket Shape 
    from S$84.99
    Min. 5 days
  20. Chip SDNN
    Sumitomo Electric Hard Metal Chip SDNN
    Clearance Angle (°)  15  Socket Shape  No hole  Shape  Square  Chip Breaker  Without breaker 
    from S$77.99
    Min. 4 days
  21. Chip SEEN
    Mitsubishi Materials Chip SEEN
    * If you order by cash on delivery, it may be shipped the next day or later.
    Socket Shape 
    from S$99.90
    Min. 4 days
  22. Chip SFEN
    Sumitomo Electric Hard Metal Chip SFEN
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    from S$139.90
    Min. 4 days
  23. Chip SEET
    Mitsubishi Materials Chip SEET
    * If you order by cash on delivery, it may be shipped the next day or later.
    Cutting Blade Length (mm)  13.4  Clearance Angle (°)  20  Thickness (mm)  3.97  Chip Breaker  One side  Shape  Square 90 ° 
    from S$129.90
    Min. 4 days
  24. Milling insert SEK-C9
    MOLDINO (Former Hitachi Tool) Milling insert SEK-C9
    Thickness (mm)  1.59  Cutting Blade Length (mm)  12.7  Inscribed Circle Diameter (Φmm)  12.70  Clearance Angle (°)  20  Wiper Insert Edge Shape  3-stage chamfer  Wiper Insert Edge Angle (°)  45  Accuracy  K class  with or without Hole  None  Shape  Square 90 °  Right or Left Hand  Without permission  Corner Height Tolerance (mm)  ±0.013  Thickness Tolerance (mm)  ±0.025  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13 
    from S$76.99
    Min. 3 days
  25. Chip SDKN
    KYOCERA Chip SDKN
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$119.90
    Min. 3 days
  26. Chip SEMT
    Sumitomo Electric Hard Metal Chip SEMT
    Clearance Angle (°)  20  Chip Breaker  One side  Shape  Square 
    from S$86.99
    Min. 4 days
  27. Chip SPCH
    Sumitomo Electric Hard Metal Chip SPCH
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    from S$59.99
    Min. 3 days
  28. Chip SEMT
    Sumitomo Electric Hard Metal Chip SEMT
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Clearance Angle (°)  20 
    from S$84.99
    Min. 3 days
  29. Milling insert SDK-C9
    MOLDINO (Former Hitachi Tool) Milling insert SDK-C9
    from S$87.99
    Min. 3 days
  30. Chip SPCH
    Sumitomo Electric Hard Metal Chip SPCH
    from S$59.99
    Min. 4 days
  31. Chip SOMT-PEER / L-JM
    Mitsubishi Materials Chip SOMT-PEER / L-JM
    * If you order by cash on delivery, it may be shipped the next day or later.
    Corner Radius (mm)  0.8  Inscribed Circle Diameter (Φmm)  12.7  Cutting Blade Length (mm)  12.7  Thickness (mm)  3.97  Chip Breaker  One side  Shape  Square 90 °  Material  VP15TF  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$119.90
    Min. 5 days
  32. Chip SEEN
    Mitsubishi Materials Chip SEEN
    Socket Shape 
    from S$199.90
    Min. 4 days
  33. Insert SEKN for milling cutter FMA01 series
    Zhuzhou Tools Insert SEKN for milling cutter FMA01 series
    Milling
    Shape  Square 
    from S$75.99
    Min. 6 days
  34. Chip SDMW
    FUJIGEN KOGYO Chip SDMW
    Number of Corners to Use  Edge shape  Honing edge 
    from S$169.90
    Min. 32 days
  35. Chip SNKN
    SANDVIK Chip SNKN
    Clearance Angle (°)  Socket Shape  No hole  Shape  Square  Chip Breaker  Without breaker 
    from S$279.90
    Min. 5 days
  36. Chip SEET
    Sumitomo Electric Hard Metal Chip SEET
    from S$99.90
    Min. 4 days
  37. Tip 490R
    SANDVIK Tip 490R
    Tip for CoroMill 490. It has a sharp cutting edge and low resistance. A true 4-corner tip. For face milling, shoulder milling, grooving, for machining that requires good surface roughness, for machining with small machines
    from S$219.90
    Min. 4 days
  38. Chip XOMT-HQ
    ISCAR Chip XOMT-HQ
    * If you order by cash on delivery, it may be shipped the next day or later.
    Corner Radius (mm)  0.4  Thickness (mm)  2.38  Cutting Blade Length (mm)  6.16  RoHS directive (corresponding to 10 substances)  Correspondence  Chip Breaker  One side  Clearance Angle (°)  Other clearance angles  Shape  Special shape  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$78.99
    Min. 5 days
  39. Chip R245
    SANDVIK Chip R245
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$189.90
    Min. 3 days
  40. Chip CSNH
    Sumitomo Electric Hard Metal Chip CSNH
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Cutting Blade Length (mm)  12.7(±0.07)  Thickness (mm)  4.8(±0.025) 
    from S$119.90
    Min. 3 days
View : Grid List
Filter

Items 1 - 40 of 473

Set Ascending Direction