Sleeves / Sockets
Sleeves and sockets are parts that are used to adjust the size and length of a metal cutting tool when it is attached to a machine tool. Used when the size of a Morse taper shank such as a drill is different or too short from the size on the machine side. The sleeve has only the function of adjusting the size of the shank, and the socket is an adapter that has both the function of adjusting the size and the extension. The material is hard metal such as chrome molybdenum steel and carbon steel, and it is hardened and polished.
TAKURA KOGU SEISAKUSYO Chuck ArborUsed when using a drill chuck, etc. on a drilling machine or lathe.Specification Hardened abrasive- MonotaRO Drill Sleeve* Do not use for anything other than its intended purpose.Specification Hardened product
- MonotaRO Chuck arborUsed when using a drill chuck, etc. on a drilling machine or lathe. * Do not use for anything other than its intended purpose.Dimension L2 (mm) 25 Specification Hardened product Tip JT6(2 1/2)
- MonotaRO Drill driftUsed when removing a drill from a drill sleeve or drill socket. * Do not use for anything other than its intended purpose.Surface Treatment Homo processing
- TAKURA KOGU SEISAKUSYO Drill sleeveUsed when adjusting the dimensions of the MT (Morse taper) shank of a drill, etc. to the spindle of the drilling machine used.Specification Hardened abrasive
- TAKURA KOGU SEISAKUSYO Drill socketMT (Morse taper) Used when you want to change or extend the shank.
- TRUSCO Chuck Arbor Hardened Polished ProductIt is used in drilling machines and lathes, and is used by attaching a drill chuck to the arbor as in the case of sleeves and sockets. It is used on poles and lathes, and is used by attaching a drill chuck, etc. to the arbor as in the case of sleeves and sockets.Material Chrome molybdenum steel (SCM415) Specification Hardened abrasive
-
- TRUSCO Drill driftA tool used to remove drill sleeves and drill sockets.Material Low carbon steel (SS41)
-
- TAKURA KOGU SEISAKUSYO Drill sleeveUsed when adjusting the dimensions of the MT (Morse taper) shank of a drill, etc. to the spindle of the drilling machine used.from S$129.90Min. 2 days
-
-
- TRUSCO Chuck arbor straight typeUsed when making Jacob taper (JT) on milling machines and machining centers.Taper JT6 (connection taper)from S$169.90Min. 2 days
-
- TRUSCO Drill socketIt is used when you want to change the size of the Morse taper or when you want to extend it.Specification Hardened abrasivefrom S$199.90Min. 2 days
- TRUSCO Drilling machine sleeveUsed when you want to change the Jacob taper JT6 (2 1/2) of the drilling machine to Morse taper (MT).Outer Diameter (mm) 25 Mass (g) 250
-
-
- PROCHI CNC drill sleeveA high-precision, high-rigidity drill sleeve that can be used by any manufacturer. Tooling for high precision CNC lathes. A high-precision drill sleeve that can be used by most manufacturers.from S$87.99Min. 4 days
- PROCHI Drill socketFull polishing, high frequency partial quenching Full polishing, high frequency partial quenching drill socket.from S$84.99Min. 4 days
- FUJIGEN KOGYO Oil shear sleeveWith the adjusting screw on the front, you can easily adjust the length of the boring bar without removing the sleeve from the holder.Specification Lathe sleeve Material Steel Hole Diameter (Φmm) [Boring bar] 8from S$189.90Min. 2 days
-
- TRUSCO Turret sleeveChange the straight shaft to a Morse taper shaft on a milling machine or machining center.from S$229.90Min. 3 days
-
- TRUSCO Drill socket long typeUse this when you want to change the size of the Morse taper or extend it. Since the drill socket has a long neck, it is convenient when there is a gap between the workpieces. When resizing the Morse taper. For extension when the work position is at the bottom.from S$439.90Min. 3 days
- PROCHI Chuck arborHigh accuracy is guaranteed by being fully polished. Chuck arbor with full polishing and high frequency partial quenching. High accuracy is guaranteed by being fully polished. By quenching only the tongue part, durability is improved while reducing costs.from S$29.99Min. 4 days
- NEW STRONG Drill drift Morse taperOverall Length (mm) 380 Width (mm) 27 Trusco Part No. 437-9586 Mass (kg) 1.2 Thickness (mm) 6from S$249.90Min. 2 days
-
-
- Miyamoto Seisakusho Magnesium boring bar sleeveFrom vibration isolation to vibration absorption. Demonstrates outstanding effects in processing high-hardness materials and hardened steel! It maximizes the high-performance vibration absorption of magnesium alloy and reduces the vibration that causes metal fatigue. "Absorbs vibration by us... Read MoreDimension X (mm) 17.5 Dimension Y (mm) 70 Dimension W (mm) 40 Dimension Z (mm) 32 Material Magnesium alloyfrom S$469.90Min. 4 days
-
-
-
- TRUSCO Drill socket long typeUse this when you want to change the size of the Morse taper or extend it.from S$399.90Min. 3 days
- KYOCERA sleeve* If you order by cash on delivery, it may be shipped the next day or later.from S$399.90Min. 3 days
- GLOBE (formerly Horiuchi) Dice sleeveSleeve for adjusting the inner diameter of the die holder slide type and die holder fixed type. For die holder slide type and die holder fixed typefrom S$29.99Min. 8 days
- GLOBE (formerly Horiuchi) Chuck driftThe drill chuck can be easily removed from the spindle of the arbor or drilling machine. Do not use it for objects that have become strongly stuck due to machine collision accidents, etc. It cannot be used if the diameter of the Morse taper or straight shank is smaller than the diameter of the Ja... Read MoreWidth (mm) 9 Overall Length (mm) 91
- GLOBE (formerly Horiuchi) Drill chuck with nut Arbor straight shank typeOutstanding run-out accuracy, taper contact, and durability due to fully quenched and polished finish. The nut makes it easy and safe to replace the drill chuck. For connection when using a drill chuck, etc. on a CNC lathe, etc.from S$73.99Min. 8 days
- Manyo tools Lathe SleeveCompatible with almost all lathe manufacturers For inner diameter and boring on lathesfrom S$86.99Min. 2 days
Filter by categories
