Collet Holders

With the taper collet type, the wall thickness of the main body can be increased, and the nut part can also be designed compactly. The smaller the taper angle, the smaller the shrinkage allowance, but the longer the true grip length, and the runout accuracy, rigidity, and grip required for end mi... Read More

Operability-oriented type (easy operation with intermediate nut method) Tightening allowance 2 mm Chucking blades of φ2.5 to φ13 with only 6 collets (D12 type)

It is an attachment for grasping small items by attaching it to the spindle of the precision tabletop lathe Compact 9. A collet chuck that matches the diameter of the material is also used. It can also be used as an attachment for other rotary tables.

* Be sure to use ultra-precision class (P class) for the spring collet.

A double-headed collet holder that can process workpieces on both sides of the main spindle and sub spindle with a single holder. The nut is an ERM (mini) type. The shank diameter is inches, and there are three types: 5/8, 3/4, and 1 inch. Wrench collet is sold separately. Shank straightness (run... Read More

A small and short holder ideal for Swiss type and comb tooth type NC lathes. The nut is an ER (hexagon / hook) type. The shank diameter is inches, and there are two types, 5/8 "and 3/4". Wrench collet is sold separately. Shank straightness (runout accuracy): ± 0.0010 mm to 0.0030 mm at ... Read More

Flange type collet holder. The nut is ERM (mini). The shank diameter is 22 mm. Wrench collet is sold separately. Shank straightness (runout accuracy): ± 0.0010 mm to 0.0030 mm at a position 300 mm from the tip of the holder.

A wrench for ERM nuts. Please use it by attaching it from the side of the nut. There are 5 types: ER08M, ER11M, ER16M, ER20M, ER25M.

A double-headed collet holder that can process workpieces on both sides of the main spindle and sub spindle with a single holder. The nut is an ER (hexagon / hook) type.

A round shank collet holder that can also be used for machining centers. The nut is an ERM (mini) type.

ERM nut is a nut for collet holder with a small outer diameter. There are four types: N08MX, N11MX, N16MX, and N25MX. The nano specification is a specification that improves the clamping force and runout accuracy by special surface treatment. Wrench collet is sold separately.

Tighten up to 2 mm with one collet. A 106 size drill can be chucked with just 6 collets. It supports synchro tap and realizes simple touring. High cost performance for high-speed rotation

Collet holder for center sul coolant. The nut is an ERM (mini) type. The shank diameter is inches, and there are three types: 5/8 ", 3/4", and 1 ". Wrench collet is sold separately. Shank straightness (runout accuracy): ± 0.0010 mm to 0.0030 mm at a position 300 mm from the tip of ... Read More

A double-headed collet holder that can process workpieces on both sides of the main spindle and sub spindle with a single holder. The nut is an ERM (mini) type. The shank diameter is metric, and there are 5 types: 16mm, 20mm, 22mm, 25mm, and 32mm. Wrench collet is sold separately. Shank straightn... Read More

The ER nut is a nut for an ER holder with a hexagonal or hook type wrench on the outer diameter. There are 6 types: N11SX, N16SX, N20SX, N25SX, N32SX, N40SX. The nano specification is a specification that improves the clamping force and runout accuracy by special surface treatment. Wrench collet ... Read More

A small and short holder ideal for Swiss type and comb tooth type NC lathes. The nut is an ERM (mini) type.

MST-Imea System (Electrode Holder System) Female coupling for electrode mounting

One unprocessed collet chuck is included so that you can make the desired hole diameter.

A small and short holder ideal for Swiss type and comb tooth type NC lathes. The nut is an ERM (mini) type.

Collet holder for center sul coolant. The nut is an ERM (mini) type.