Pull Stud Bolts
A pull stud bolt is one of the parts (tooling) for attaching cutting tools such as drills to machine tools. To attach the cutting tool to the machine tool, the pull stud bolt must be tightened to hold the cutting tool securely to the machine tool. This is because the pull stud bolt must not loosen while the cutting tool is in use. Pull stud bolts are important parts for holding cutting tools. As for types, there are MAS1 and MAS2 standards, with the MAS1 type having a 45-degree gripping angle and the MAS2 type having a 60-degree angle. Care must be taken as this varies depending on the model of the machine tool used.
Other Related Pages
MonotaRO Pull stud boltIt is attached to the rear of the taper of the BT holder and used as a pull-in bolt for the machining center. * Do not use for anything other than its intended purpose.- BIG DAISHOWA Pull Stud Bolt* If you order by cash on delivery, it may be shipped the next day or later.from S$33.99Min. 2 days
- BIG DAISHOWA Pull stud boltDurable, high quality pull bolts made from highly reliable materials. A pull bolt that uses die steel to increase tensile strength.Dimension D2 (Φmm) 12.45 Dimension L1 (mm) 14.03 Dimension D1 (Φmm) 18.8 Dimension L (mm) 19.11 Trusco Part No. 397-9962 Angle θ (°) 45 Mass (g) 90 Taper BT40 Thread Size M16 Standard Manufacturer standard Type Standard Suitable Model Yamazaki Mazak (with 7mm hole)
-
-
-
- THECUT Pull round barBar for pull circle, bar for wrench pull circleMaterial S45Cfrom S$33.99Min. 4 days
- YUKIWA SEIKO Pull stud bolt* If you order by cash on delivery, it may be shipped the next day or later.from S$46.99Min. 2 days
- BIG DAISHOWA Pull stud boltDurable, high quality pull bolts made from highly reliable materials. * Be sure to check the specifications as it may differ depending on the specifications of the model of the machine you are using. * Especially for center-through machines, the sealing method may differ depending on the pressure... Read MoreType Standard
- THECUT Pull bolt BT40 wrench Pull roundA wrench for pull bolt BT40 that fits the pull bolt and allows the pull bolt to be safely and securely attached and detached. Wrench for pull bolt BT40Overall Length (mm) 50 Taper BT40 Material SCM435 tempered steelfrom S$86.99Min. 2 days
-
- THECUT Pull bolt BT50 wrench Pull circleA wrench for the pull bolt BT50 that fits the pull bolt and allows the pull bolt to be safely and securely attached and detached. Wrench for pull bolt BT50Taper BT50 Material SCM435 tempered steel Overall Length (mm) 65from S$99.90Min. 4 days
- BIG DAISHOWA Pull stud boltTaper BT40 Suitable Model Mori Seiki Works, Shizuoka Iron Works Trusco Part No. 460-9786 Thread Size M16 Mass (g) 90 Standard 90 ° typefrom S$44.99Min. 5 days
-
-
-
-
-
- THECUT Pull bolt BT30 wrench Pull circleWrench pull circle for pull bolts only. The shape that fits the pull bolt allows you to safely and securely attach and detach the pull bolt. PM-BT30-T can be used with a torque wrench if an adapter is attached. Pull bolt BT30 wrench pull roundOverall Length (mm) 38 Taper BT30 Material SCM435 tempered steelfrom S$99.90Min. 4 days
-
-
- Winwell Hook spanner for CMASpecification Hook spanner for CMA Suitable Chucks CMAfrom S$11.99Min. 6 days
-
- THECUT Torque adapter for pull bolt BT30Wrench pull circle for pull bolts only. The shape that fits the pull bolt allows you to safely and securely attach and detach the pull bolt. PM-BT-30T can be used with a torque wrench by attaching an adapter. Torque compatible adapter for pull bolt BT30Overall Length (mm) 45 Taper BT30 Material SCM435 tempered steel Trusco Part No. 760-7296from S$169.90Min. 4 days
-
- Winwell Z-axis origin setting device (with magnet)Mass (kg) 1.5 Overall Length (mm) 50 Trusco Part No. 166-6814from S$849.90Min. 6 days
- BIG DAISHOWA Pull stud boltDurable, high quality pull bolts made from highly reliable materials. * Be sure to check the specifications as it may differ depending on the specifications of the model of the machine you are using. * Especially for center-through machines, the sealing method may differ depending on the pressure... Read MoreAngle θ (°) 90 Standard Manufacturer standard Type Standardfrom S$49.99Min. 2 days
- SUPER TOOL StudSince the threaded part is rolled, it is resistant to wear and distortion and can be used semi-permanently. You can use one bolt for long and short. Bolts used to connect the jig and tool body to the table to fix the workpiece.Hardness HRC 22～26 Material / Finish Steel (S45C) / Black dye finishfrom S$9.89Min. 5 days
-
-
-
-
-
-
-
-
-
-
-
-
