Live Centers

A high-rigidity, semi-high-speed type with a buffer structure that absorbs the thermal expansion of the workpiece due to high-speed cutting and does not apply an excessive axial load to the thrust ball bearings. Since the main body is designed to fit within the center angle of 60 °, it does not i... Read More

Attaches to the tailstock to support long materials. A ball bearing is built in inside to prevent seizure because the material rotates and rotates. For hard materials and high-speed rotation. Hold the center

Light load, economical compact design, size is almost the same as dead center. A highly economical type designed for ease of use with a rotating center cup.

It is attached to the tailstock of the Precision Mini Lathe Compact 3 and used to support the workpiece (material). It has a built-in bearing and rotates in the same way as the material rotates, so the tip is hard to seize. It is the same as the one that comes standard with the Precision Mini Lat... Read More

Adopted a unique head driving mechanism (head integrated with the center). 100% prevention of dust and cutting water intrusion to maintain high accuracy. For wet cutting of NC lathes.

Used for center pushing work. Two ball bearings are incorporated, and it is effective for center work without friction with the workpiece.

Can be used in a wide range from rough workpieces to high-precision workpieces. The accuracy is within 0.003 mm at the center runout, and it can be used in a wide range from rough workpieces to workpieces that require high accuracy.

(LC-A type) High rigidity, popular type, long life type, and structure that can adjust the bearing clearance by tightening the front lid with a wrench to maintain high accuracy for a long period of time.

The unique structure of the Sanflon seal prevents the ingress of cutting oil and water. It is ideal not only for dry cutting but also for wet cutting of NC lathes. It is a holder mainly for preventing and supporting long workpieces in lathe work.

Optimal for heavy cutting and general cutting M.T No.1 and No.2 have 2 ball bearings and 1 thrust bearing inside this machine. M.T No.3 to No.7 use three types, one each for tapered roller bearings and thrust bearings.

The unique structure of the Sanflon seal prevents the ingress of cutting oil and water. It is ideal not only for dry cutting but also for wet cutting of NC lathes. It is a holder mainly for preventing and supporting long workpieces in lathe work.

The structure is the same as 100 type, but by adopting V seal, it is most suitable when using cutting oil.

Contains bearings. As a center tool for the center hole of the pipe.

Due to the processing heat generated during cutting, the elongation of the workpiece is absorbed more by the disc spring built in the center, so there is no distortion of the workpiece and the accuracy is improved. The thrust mechanism absorbs the thrust load generated by the elongation of the wo... Read More

The bearing used is larger than the standard type so that it can withstand heavier objects, and the outer diameter of the main body and the center shaft diameter are made thicker.

There are MT-1 and MT-2. Since the maximum distance between centers will be shorter, care must be taken when the work length is near the catalog value. * The maximum distance between centers will be shorter, so be careful when the work length is near the catalog value.

The labyrinth seal provides waterproof performance in the medium and high speed range and rotates lightly. NC lathes, ordinary lathes, copying lathes, hobbing machines, polishing machines, measuring machines, and dedicated machines support various rotating bodies.

Standard model for general-purpose lathes For general-purpose lathes * There are two types, one with a replaceable tip and the other with an integrated tip.

Adopting large angular bearings for large machines after MT7 NC lathes, ordinary lathes, copying lathes, hobbing machines, polishing machines, measuring machines, and dedicated machines support various rotating bodies.

Demonstrates a waterproof effect even when there is no rotation due to the oil seal NC lathes, ordinary lathes, copying lathes, hobbing machines, polishing machines, measuring machines, and dedicated machines support various rotating bodies.

The shape of the tip is free. Ideal for both center machining of small diameter workpieces and workpieces without center holes. It can also be used as a steady rest for elongated workpieces. The head driving mechanism makes it difficult for dust and cutting oil to enter. For both center processin... Read More

A head driving mechanism with a simple structure and high rigidity and run-out accuracy is used. A three-point bearing system incorporating a special thrust bearing demonstrates outstanding power against thrust loads. Center runout within 0.003mm. It prevents dust and cutting water from entering ... Read More

It is waterproof by using an oil seal.

Waterproof structure that prevents cutting water with an oil seal. Waterproof even if the rotation is slow For NC lathe * There are two types, one with a replaceable tip and the other with an integrated tip.

Waterproof function to prevent cutting water with a film of air created by rotation For fine processing and light metal processing * There are two types, one with a replaceable tip and the other with an integrated tip.