Hex-Shank Drill Bits

Cross-thinning processing (3 mm or more) on the tip provides excellent bite into materials. Comes with a convenient step bit for drilling curved surfaces such as pipes. *Be sure to wear safety glasses when working as there is a risk of damage. *Do not touch the cutting edge with bare hands. *Be c... Read More

By applying X-shaped thinning processing (3 mm or more) to the cutting edge, outstanding bite and sharpness are achieved. Center runout range 0.6 mm. Achieves improved processing speed by adopting titanium coating. *Be sure to wear safety glasses when working as there is a risk of damage. Do not ... Read More

Cutting efficiency is improved with a special cutting edge, enabling smooth drilling work. The short size makes it hard to shake, and you can make accurate and beautiful holes. Work material: Iron, aluminum, stainless steel, copper, wood. It can be attached to an electric drill with a single touc... Read More

Hexagonal shaft shank allows one-touch attachment / detachment to the charging driver Iron / Copper / Aluminum / Plastic / Wood

It can be attached to the charging impact driver with one touch. Since the cutting edge is X-thinned, it is not slippery and accurate drilling work is possible. Work material: General steel, light metal, plastic, wood, ironwork, aluminum, woodwork, acrylic board.

By applying X-shaped thinning processing (3 mm or more) to the cutting edge, outstanding bite and sharpness are achieved. Center runout range 0.6 mm. Achieves improved processing speed by adopting titanium coating. *Be sure to wear safety glasses when working as there is a risk of damage. *Do not... Read More

Hexagonal shaft shank allows one-touch attachment / detachment to the charging driver Stainless steel, iron, steel, wood, plastic

The unique tip shape realizes threatening sharpness, bite, and durability. Easy drilling of any difficult-to-cut materials. Gekko drill that has appeared on numerous TV programs without the need for pilot holes, punches, or cutting oil. For stainless steel, iron, aluminum / plastic, general steel... Read More

Ideal for use with rechargeable drills! The handle is a screwdriver bit type, so it can be attached and detached with one touch. Thinning treatment is applied to the cutting edge, so it can be easily processed by hand.

Uses cobalt high-speed steel, making it ideal for processing stainless steel. By applying X-shaped thinning processing (3 mm or more) to the cutting edge, outstanding bite and sharpness are achieved. Center runout range 0.6 mm. *Be sure to wear safety glasses when working as there is a risk of da... Read More

Highest class HSS CO steel specifications for long life and continuous use time!・ By thinning processing (3.0mm or more), it bites firmly and has excellent sharpness!・ Cross thinning X type that bites tightly ・ Beautiful drilling can be done on difficult-to-cut materials such as iron, aluminum... Read More

With a normal drill, the workpiece at the time of penetration may not be removed and may be plastically deformed and remain as a large burr. This is especially true for sticky materials and sheet steel. The quick drill adopts the tip shape of candle sharpening, and the work piece at the time of p... Read More

A hexagonal shaft drill ideal for machining stainless steel. The groove length emphasizes rigidity.

Excellent workability. Less core shake and less likely to break. Excellent sharpness. Firmly bite into the processed material by cross-thinning processing. Better grip at the start of cutting allows drilling with less force. For drilling holes in ironwork, wood, light alloys, synthetic resins, etc.

The cross-thinning process makes it easy to bite and make holes smoothly. For DIY etc. For drilling holes in ironwork, wood, light metals, and synthetic resins. * Check before use to see if there are any abnormalities such as deformation or cracks. When using with an impact driver, there is a ris... Read More

High hardness (high-speed) steel does not reduce sharpness. Comes with a tube that does not transfer heat to your fingers when attaching or detaching from the press connection tool. Cushion ring suppresses runout. In addition, high-speed drilling with X-type (cross) thinning. Outstanding clinging... Read More

With a hexagonal shaft (6.35 mm) finish, it can be attached to an impact driver with one touch, and can be easily used as a drill for stainless steel. Since the groove length is short, the rigidity is high, and high efficiency and high precision drilling is possible. Abrasion resistance is improv... Read More

It can be attached to the charging impact driver with one touch. Since the cutting edge is X-thinned, it is not slippery and accurate drilling work is possible. Work material: General steel, light metal, plastic, wood, ironwork, aluminum, woodwork, acrylic board.

The cutting edge is thinned, allowing you to drill holes at the correct position. Ideal for drilling holes in iron, aluminum, copper, and wood. *Be sure to wear safety glasses while working. Avoid wearing gloves while working. There is a risk of getting caught. It cannot be used for drilling heat... Read More

The tip takes the center of the round hole and processes it accurately. It can also be used with drilling machines and electric drills. For drilling holes in wood and resin. * You can make a clean hole by hitting unnecessary wood and making a hole together. * Do not use for fragile materials such... Read More

Since the cutting edge has undergone X-thinning processing, the cutting edge does not escape and can be drilled in an accurate position. The hexagonal shaft shank allows one-touch attachment to an electric drill. Ideal for drilling holes in iron, aluminum, copper, and wood (drilling pilot holes).... Read More

It is a cross-thinning process with good clinging. The drilling speed has been greatly increased with a special cutting edge, and the cutting efficiency has been greatly improved. By shortening the total length, the blurring of the drill blade can be reduced and accurate drilling can be performed... Read More

Excellent workability. Less core shake and less likely to break. Excellent sharpness. Firmly bite into the processed material by cross-thinning processing. Better grip at the start of cutting allows drilling with less force. For drilling holes in stainless steel, light metals, general steel, wood... Read More

Since the shank and the cutting edge are integrated, there is no blurring or chattering of the cutting edge, and accurate drilling is possible.

Compatible with all kinds of materials (iron, stainless steel, aluminum) With a normal drill, there is a distance from the tip to the cutting edge, so the heat action due to friction with the material during drilling increases the hardness of the material, which is difficult to cut ( It is diffic... Read More

It can be attached to an electric drill with a single touch using a hexagonal shaft shank. X-shaped thinning is applied so that the cutting edge does not escape. It is possible to make holes at the correct position. Ideal for pilot holes in wood, bamboo, acrylic boards, aluminum, nails and wood s... Read More

With a hexagonal shaft (6.35 mm) finish, it can be attached to an impact driver with a single touch, and can be easily used as an ironworking drill. Since it is an integrated process, there is no center deviation of the cutting edge, and accurate drilling is possible. Large holes can be made with... Read More

With a hexagonal shaft (6.35 mm) finish, it can be attached to an impact driver with a single touch, and can be easily used as an ironworking drill. The X-type thinning process has good biting properties and good chip evacuation at the tip, which greatly extends the life of the drill. Also, the c... Read More

Since a specially designed drill is used, it is easy to drill holes and good chip evacuation. Detachable with one touch. For drilling holes in materials

Excellent workability due to its short size! The drill blade is firmly stable and has a structure that does not easily come off. Cross thinning processing! Excellent bite! (Φ3.0mm or more) Difficult-to-cut materials, stainless steel, general steel materials, cast iron, light metals

With a hexagonal shaft (6.35 mm) finish, it can be attached to an impact driver with a single touch, and can be easily used as an ironworking drill. The X-type thinning process has good biting properties and good chip evacuation at the tip, which greatly extends the life of the drill. Also, the c... Read More

By combining a medium drill and a chamfering cutter, a pilot hole and 90 degree chamfering can be processed simultaneously with a single drill. Since high-speed steel (HSS) is used, the drill wears less and can be used for a long time. If the middle drill wears out, it can be easily replaced with... Read More

With a hexagonal shaft (6.35 mm) finish, it can be attached to an impact driver with a single touch, and can be easily used as an ironworking drill. High rigidity due to the short groove length.

The unique tip shape realizes threatening sharpness, biting, and durability. Easily drill holes in any difficult-to-cut material. No need for pilot holes, punches, or cutting oil, and many moonlight drills appearing on TV. Stainless steel, iron, aluminum / plastic, etc., general steel * Reference... Read More

It can be attached to and detached from the charging driver with a single touch. Work material: Stainless steel.

Ideal for drilling holes in stainless steel! The machined surface is beautiful and you can make highly accurate holes! Excellent sharpness by biting firmly by thinning processing (3 mm or more)! For drilling holes in stainless steel, light metals, general steel, wood, etc.

It can be attached directly to a screwdriver or impact driver without a chuck, and can be attached with one touch. Use 9.6V or higher for rechargeable drills. For drilling pilot holes for iron, aluminum, and wood (wood screws)

Since the shank and the cutting edge are integrated, there is no blurring or chattering of the cutting edge, and accurate drilling is possible. Both rotation and impact can be used. Attached to various charging drills with one touch. By polishing the carbide tip of the cutting edge asymmetrically... Read More

For drilling holes in stainless steel, iron, and wood. It is a cross-thinning process with good clinging. The drilling speed has been greatly increased with a special cutting edge, and the cutting efficiency has been greatly improved. By shortening the total length, the blurring of the drill blad... Read More

For drilling holes in light metals such as iron, body, brass, and aluminum, resin, and wood. With cross thinning processing, the bite at the beginning of drilling is very good. A set of 10 pieces of 2mm, 2.5mm, 2.8mm, 3mm, 3.2mm, 3.5mm, 3.8mm, 4mm, 4.5mm and 5mm. It cannot be used for heat-treate... Read More